Zhuzhou TGC Cemented Carbide Co.,Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 5000kgs per month |
| Delivery Time | Standard products in one week |
| Packaging Details | plastic box/box + Cartons |
| Material | 10% Cobalt |
| ISO Grade | K30 |
| Diameter | 8mm |
| Leght | 100mm |
| Tolerance | h6/h5 |
| Surface Roughness | Ra 0.2 |
| Circularity | 0.02 |
| straightness | 0.02 |
| Density | 14.50 |
| Hardness HV30 | 91.8 |
| T.R.S | 3800 |
| Grain size | 0.8 |
| Brand Name | OUQI |
| Model Number | Endmills blanks |
| Certification | ISO9001:2008 ISO14001:2004 |
| Place of Origin | China |
View Detail Information
Explore similar products
0.3μM Cemented Solid Carbide Cutting Tools Round Bars HRA 93.5 End mills Blank
Fine Grain Cemented Carbide Milling Blanks Rods Ø4×40mm h6 h5 Tolerance
Cemented Carbide Engraving Cutter End Mill HRA 94 Wear Resistance
0.7μM Cemented Carbide Milling Blanks Endmill K40 OD 2.35mm Fine Grain Size
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 5000kgs per month |
| Delivery Time | Standard products in one week | Packaging Details | plastic box/box + Cartons |
| Material | 10% Cobalt | ISO Grade | K30 |
| Diameter | 8mm | Leght | 100mm |
| Tolerance | h6/h5 | Surface Roughness | Ra 0.2 |
| Circularity | 0.02 | straightness | 0.02 |
| Density | 14.50 | Hardness HV30 | 91.8 |
| T.R.S | 3800 | Grain size | 0.8 |
| Brand Name | OUQI | Model Number | Endmills blanks |
| Certification | ISO9001:2008 ISO14001:2004 | Place of Origin | China |
| High Light | Aluminum Alloy Cemented Carbide Milling Blanks ，K1C 10.5 Cemented Carbide Milling Blanks ，10% Cobalt Carbide Cutting Rod | ||
K1C 10.5 Cemented carbide milling blanks for cutting aluminum alloy with long service life
OD: 8mm -0.006
Length: 100mm +0.5
One end with chamfer.
| ISO | Grain size | Cobalt | Density | Hardness | T.R.S | k1C |
| Code | μm | % | g/cm3 | HRA | N/mm2 | Mpa.m1/2 |
| K40 | 0.8 | 10 | 14.45 | 91.8 | 3800 | 10.5 |
Application: Sub-fine grain size, processing by medium speed, good general performance, drill bits and end mills are recommended, suitable for cutting ordinary alloy steel, aluminum alloy, heat resistant alloy, cast iron etc.
| Diameter mm | Length mm | Diameter mm | Length mm | |||||
| D | Tolerance | L | Tolerance | D | Tolerance | L | Tolerance | |
| 1.60 | +0/-0.006 | 20 | 0/+0.5 | 10.00 | +0/-0.009 | 50 | 0/+0.5 | |
| 2.35 | 30 | 0/+0.5 | 10.00 | 70 | 0/+0.5 | |||
| 2.35 | 45 | 0/+0.5 | 10.00 | 72 | 0/+0.5 | |||
| 3.00 | 60 | 0/+0.5 | 10.00 | 75 | 0/+0.5 | |||
| 4.00 | +0/-0.008 | 40 | 0/+0.5 | 10.00 | 80 | 0/+0.5 | ||
| 4.00 | 46 | 0/+0.5 | 10.00 | 90 | 0/+0.5 | |||
| 4.00 | 50 | 0/+0.5 | 10.00 | 100 | 0/+0.5 | |||
| 4.00 | 60 | 0/+0.5 | 12.00 | +0/-0.011 | 70 | 0/+0.5 | ||
| 4.00 | 75 | 0/+0.5 | 12.00 | 79 | 0/+0.5 | |||
| 4.00 | 100 | 0/+0.5 | 12.00 | 83 | 0/+0.5 | |||
| 5.00 | 50 | 0/+0.5 | 12.00 | 100 | 0/+0.5 | |||
| 5.00 | 60 | 0/+0.5 | 12.00 | 120 | 0/+0.5 | |||
| 5.00 | 100 | 0/+0.5 | 13.00 | 100 | 0/+0.5 | |||
| 6.00 | 40 | 0/+0.5 | 14.00 | 75 | 0/+0.5 | |||
| 6.00 | 50 | 0/+0.5 | 14.00 | 80 | 0/+0.5 | |||
| 6.00 | 58 | 0/+0.5 | 14.00 | 83 | 0/+0.5 | |||
| 6.00 | 60 | 0/+0.5 | 14.00 | 100 | 0/+0.5 | |||
| 6.00 | 67 | 0/+0.5 | 16.00 | 80 | 0/+0.5 | |||
| 6.00 | 75 | 0/+0.5 | 16.00 | 90 | 0/+0.5 | |||
| 6 | 100 | 0/+0.5 | 20.00 | +0/-0.013 | 100 | 0/+0.5 | ||
| 8 | +0/-0.009 | 50 | 0/+0.5 | |||||
| 8 | 60 | 0/+0.5 | ||||||
| 8 | 63 | 0/+0.5 | ||||||
| 8 | 75 | 0/+0.5 | ||||||
| 8 | 90 | 0/+0.5 | ||||||
| 8 | 100 | 0/+0.5 | ||||||
| General tolerance for the h6 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -6/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -8/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -9/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -11/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -13/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -16/0 | 30,1- 50,0 | 5,0 micron | |||||||
| General tolerance for the h5 finished ground solid carbide rods | ||||||||||
| Diameter | Tolerance μm | Length | Tolerance | Straightness | Tolerance | Circularity | Tolerances | |||
| ＜3.0 | -4/0 | ＜100.0 | +0.5/+1.0 | ＜4.0 | 0.07 | <3,0 | 2,0 micron | |||
| 3.0-6.0 | -5/0 | 100.0-165.0 | +1.0/+2.5 | 4.5-5.0 | 0.06 | 3,0- 6,0 | 2,5 micron | |||
| 6.0-1.0 | -6/0 | 165.0-335.0 | +1.0/+6.0 | 5.5-12 | 0.05 | 6,1-10,0 | 3,0 micron | |||
| 10.0-18.0 | -8/0 | ＞12.5 | 0.04 | 10,1-18,0 | 3,5 micron | |||||
| 18.0-30.0 | -9/0 | 18,1- 30,0 | 4,0 micron | |||||||
| 30.0-50.0 | -11/0 | 30,1- 50,0 | 5,0 micron | |||||||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2013
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Site Member
Zhuzhou TGC Cemented Carbide Co., Ltd. is a Sino-foreign joint venture established in 2013 and located in GECKOR Xinma Industrial Park in Tianyuan District, Zhuzhou, where there are well-developed traffic and logistics and modern standard workshops. The company is mainly engaged in th... Zhuzhou TGC Cemented Carbide Co., Ltd. is a Sino-foreign joint venture established in 2013 and located in GECKOR Xinma Industrial Park in Tianyuan District, Zhuzhou, where there are well-developed traffic and logistics and modern standard workshops. The company is mainly engaged in th...
Get in touch with us
Leave a Message, we will call you back quickly!