Zhuzhou Mingri Cemented Carbide Co., Ltd.
| Material | 100% virgin tungsten carbide |
| Grade | YG8 |
| Size | 30*20*75 mm |
| Density | 14.7 g/cm3 |
| Hardness | 89.8 HRA |
| Tensile Strength | 2800 MPa |
| Wire Diameter Range | 0.127 - 76.2 mm |
| Surface Treatment | sand blasting |
| Shape | Customizable |
| Performance | Good wear resistance and strength |
| Application Stress | High stress |
| Max Bar Diameter | OD50mm |
| Max Tube Diameter | OD35mm |
| RA Value | 9.6 - 13.5 |
| a Value | 6 - 18 |
| Place of Origin | Hunan, China |
| Brand Name | RIXIN |
View Detail Information
Explore similar products
YG25C Tungsten Carbide Die / Cold Heading Dies Pellets Molds Nib Cores
Cemented Carbide Punches And Dies Forging Molds Hot Forging Dies And Finshing
Nut Forging Die Blank Punching Hardware Forging Tungsten Carbide Heading Die
Header Dies Blanks Tungsten Carbide Dies HIP Process Homogeneous Property
Product Specification
| Material | 100% virgin tungsten carbide | Grade | YG8 |
| Size | 30*20*75 mm | Density | 14.7 g/cm3 |
| Hardness | 89.8 HRA | Tensile Strength | 2800 MPa |
| Wire Diameter Range | 0.127 - 76.2 mm | Surface Treatment | sand blasting |
| Shape | Customizable | Performance | Good wear resistance and strength |
| Application Stress | High stress | Max Bar Diameter | OD50mm |
| Max Tube Diameter | OD35mm | RA Value | 9.6 - 13.5 |
| a Value | 6 - 18 | Place of Origin | Hunan, China |
| Brand Name | RIXIN | ||
| High Light | YG8 Grade Tungsten Carbide Die ，Customizable Wire Drawing Die ，Copper Wire Drawing Hard Metal Die | ||
| Grade | Density g/cm3 | Hardness HRA | T.R.S MPa | Performance & application recommended | ISO |
| YG6X | 14.85 | 91.5 | 2300 | good wear resistance,suitable for drawing steel wires,nonferrous metal wires and alloy wires or bars less than OD6mm under low stress | K10 |
| YG6 | 14.9 | 90.5 | 2400 | good wear resistance,suitable for drawing steel,nonferrous metal and alloy wires or bars less than OD20mm under low stress,also for drawing tubes less than OD10MM | |
| YG8X | 14.65 | 91.5 | 2900 | good wear resistance and strength,suitable for drawing all kinds of wires and bars | K20 |
| YG8 | 14.7 | 89.8 | 2800 | good wear resistance and strength,suitable for drawing steel,nonferrous metal and alloy bars less than OD50mm under high stress,also for drawing tubes less than OD35mm | |
| YG15 | 14 | 87 | 3000 | suitable for drawing steel bars and tubes under very high stress | K40 |
| Other grades may be offered by customers'requirement | |||||
hard metal drawing die can be made in a wide range of sizes, ranging from 0.127 - 76.2 mm (.005 - 3.000”) or larger upon request.
We also can produce unstandard hard metal drawing die according to customers' requirement.
| item no | RA | a |
| 1 | 13.5 | 6 |
| 2 | 12.7 | 8 |
| 3 | 12.2 | 10 |
| 4 | 11.9 | 8 |
| 5 | 11.8 | 8 |
| 6 | 10.7 | 18 |
| 7 | 10.1 | 12 |
| 8 | 9.8 | 10 |
| 9 | 9.6 | 8 |
| ... | ... | ... |
hard metal drawing die are frequently and successfully used in wire drawing (round & shaped), bunching, stranding, guiding, and split die applications.
hard metal drawing die are used for manufacturing wire or rod.
hard metal drawing die often used in short run applications where trials, testing or small lots are desired.
1, Soon after the order is confirmed, hard metal drawing die products will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine
2, Before mass production, we need to do a trial pressing and sintering using every mould, and we check the appearances and the sizes of hard metal drawing die samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and all hard metal drawing die must be passed by semi finished inspection,
4, Then sinter blanks to finish (HIP) and finished products inspection, we have 10 sets of vacuum sintering furnace and 2 sets of HIP in the factory ensure the best quality and production capacity.
5, 1). cleaning/tumbling is to make the hard metal drawing die look more beautiful.
2).The hard metal drawing die can be ground according to customers’ order tolerance requirement.
Generally we will take care of your machine packages well like picture show.
Firstly our worker will make sure your hard metal drawing die clean before package.
Then add plastic foam into inner box for the whole hard metal drawing die for sweet protection.
At last we will make export standard strong cartonn or plywood case package according to your needs.
Our company have 230 workers, 8000 m2 non-dust workshop, 18 years experience , 10000 sets mould, 10 workshop included grinding powder workshop, pressing workshop, sintering workshop, processing workshop, mould production workshop, production capacity 50tons/month, well-known brand ”Ri Xin” has registered in Europe for 6 years , ISO, CE certificated, one hour reach Shanghai port, this is how we keep superior quality and competitive offers for global valued customers.
Our main products cover cold heading dies, wire drawing dies, strips and plates, saw tips, brazed tips, disc cutters, round rods, rock drilling bits and buttons, milling tools, also we can make all kinds of customized proposal to meet customers’ requirement.
1. We joined Alibaba Trade Assurance to make sure the buyer’s benefit. If can’t meet the details in the contract, 100% of your payment will be returned.
2. As a professional manufacturer, we have 18 years factory experience for hard metal drawing die. We are devoting to the research and manufacturing of many different type and size.
3. You can see from the below picture that many customers visited our exhibition booth, more and more customers in the world are using our hard metal drawing die , we received many good feedbacks or reviews from lots of countries.
Contact us
Company Details
Business Type:
Manufacturer
Year Established:
2001
Total Annual:
13000000-16300000
Employee Number:
100~160
Ecer Certification：
Verified Supplier
Zhuzhou Mingri Cemented Carbide Co., Ltd. Located in Liyu Industrisl Area, Zhuzhou City, Tianyuan District, Hunan Province, Zhuzhou Mingri Cemented Carbide Co., Ltd was established in May of 2001 with the investment of RMB 40 million and area of 33000 square meters. ... Zhuzhou Mingri Cemented Carbide Co., Ltd. Located in Liyu Industrisl Area, Zhuzhou City, Tianyuan District, Hunan Province, Zhuzhou Mingri Cemented Carbide Co., Ltd was established in May of 2001 with the investment of RMB 40 million and area of 33000 square meters. ...
Get in touch with us
Leave a Message, we will call you back quickly!