Zhuzhou Mingri Cemented Carbide Co., Ltd.
| Surface | Coated, Blanks Unground |
| Power Source | Electric |
| Engine Type | Electric |
| TRS | 2400--2900 |
| HRA | 83.5--88.5 |
| Material | 100% Virgin Tungsten Carbide |
| Grade Density | 13.5--14.4 g/cm3 |
| Grade TRS | 2400--3100 MPα |
| Grade Hardness | 82.5--88.5 HRA |
| Diameter (D) | 10-100mm |
| Diameter (d) | 2-30mm |
| Length (L) | 10-60mm |
| Customizable Sizes | Yes |
| Density Range | 13.1--14.4 g/cm3 |
| Impact Resistance | High |
| Place of Origin | Hunan, China |
| Brand Name | Rixin |
| Model Number | BD |
View Detail Information
Explore similar products
YG25C Tungsten Carbide Die / Cold Heading Dies Pellets Molds Nib Cores
Cemented Carbide Punches And Dies Forging Molds Hot Forging Dies And Finshing
Nut Forging Die Blank Punching Hardware Forging Tungsten Carbide Heading Die
Header Dies Blanks Tungsten Carbide Dies HIP Process Homogeneous Property
Product Specification
| Surface | Coated, Blanks Unground | Power Source | Electric |
| Engine Type | Electric | TRS | 2400--2900 |
| HRA | 83.5--88.5 | Material | 100% Virgin Tungsten Carbide |
| Grade Density | 13.5--14.4 g/cm3 | Grade TRS | 2400--3100 MPα |
| Grade Hardness | 82.5--88.5 HRA | Diameter (D) | 10-100mm |
| Diameter (d) | 2-30mm | Length (L) | 10-60mm |
| Customizable Sizes | Yes | Density Range | 13.1--14.4 g/cm3 |
| Impact Resistance | High | Place of Origin | Hunan, China |
| Brand Name | Rixin | Model Number | BD |
| High Light | Customizable Tungsten Carbide Pellet ，OEM Support Tungsten Carbide Die ，Virgin Tungsten Carbide Carbide Die | ||
| Item | Tungsten carbide die |
| Grade | YG6, YG8, YG11, YG12, YG15, YG20, YG20C, YG22C, YG25C, GT55, ML40, ML100, ST7, VA90, C5 |
| Sizes | standard or customized. |
| Brand | Rixin |
| Country of Origin | Zhuzhou, China |
| Usage | die casting mould, punch dies, wire drawing die, machine mold, progressive die, extrusion die, press mold, mould parts, trimming die, cold heading die, forging mold, cold forming die etc. |
1. Tungsten carbide die blanks are widely used for making finished die casting mould, punch dies, wire drawing die, machine mold, progressive die, extrusion die, press mold, mould parts, trimming die, cold heading die, forging mold, cold forming die etc.
2. Mingri has the most stock of available moulds for various sizes of carbide dies which saving a lot cost for our customers.
3. Mingri has the most wide and stable grades for carbide dies and has highest cost performance comparing to Kennametal, Cbcarbide.
| Density | T.R.S | Hardness | Properties & Applications | Approx Grades in China | |
| A | 13.5 | 3000 | 83.5 | Good wear resistance and bending strength. It is often preferrd by nut forming dies and high impact-resistant dies. | — |
| YM11 | 14.4 | 2420 | 88.5 | Forming or stamping dies for metal powders and non-metal powders. | YG11 |
| YM15 | 14.0 | 2500 | 87.5 | It is suitable for drawing steel tubes and rods under high compression ratio, manufactuing upsetting, punching and forging tools under large stress. | YG15 |
| YM20 | 13.5 | 2800 | 85.5 | It is suitable for manufacturing punching dies for watch parts, leaf spring of musical instruments, battery jars, small sized steel balls, screws, screw caps, etc. | YG20 |
| ML32 | 13.9 | 2750 | 85.5 | It is suitable for impact-resistantant forging dies. | YG16C |
| ML36 | 13.7 | 2800 | 84.5 | It is suitable for impact-resistant forging dies, hot-forging dies and finishing rollers. | YG18C |
| ML40 | 13.5 | 2850 | 83.5 | It is suitable for wear resistant or impact resistant dies. | YG20C ZL40.2 |
| ML50 | 13.3 | 2900 | 83.0 | It is suitable for nut forming dies and high impact-resistantant dies. | YG22C ZL40.5 |
| ML60 | 13.1 | 2950 | 82.5 | It is suitable for stainless screw dies and semifinishing rollers. | YG25C ZL40B |
| ML80 | 13.1 | 3050 | 83.4 | It is suitable for screw cap forming dies with high strength ( highest impact-resistant forging dies). | YG25C GT55 |
| ML100 | 13.1 | 3100 | 84 | It is suitable for screw cap forming dies with high strength ( highest impact-resistant forging dies). | GT55 plus |
| Other grades of cemented carbide blanks for cold-forging dies may be offered by customers' requirements | |||||
D: 10-100mm
d: 2-30mm
L: 10-60mm
Other sizes can be offered aacording to customers requirements.
| Packing | Paper+paper boxes+exported wooden cartons or paper cases. As a manufacturer, Mingri can provide any kinds of package as buyer's requirement. |
| Shipping | UPS,TNT,EMS,Fedex,DHL,or as you request. |
| Delivery | 7-10 days after confirm all details. |
Carbide tungsten plates,tungsten carbide draw plate,tungsten carbide draw plate
We are specialized in all kinds of tungsten carbide profiles and dies, cutting tools, mining tools, wear parts and all kinds of non-standard customized tool parts with high performance in the industry.
Workshop
Production & Testing
Team and Exhibitions
Any detailed information needed, please feel free to contact us! We will reply to you ASAP!!!
Company Details
Business Type:
Manufacturer
Year Established:
2001
Total Annual:
13000000-16300000
Employee Number:
100~160
Ecer Certification：
Verified Supplier
Zhuzhou Mingri Cemented Carbide Co., Ltd. Located in Liyu Industrisl Area, Zhuzhou City, Tianyuan District, Hunan Province, Zhuzhou Mingri Cemented Carbide Co., Ltd was established in May of 2001 with the investment of RMB 40 million and area of 33000 square meters. ... Zhuzhou Mingri Cemented Carbide Co., Ltd. Located in Liyu Industrisl Area, Zhuzhou City, Tianyuan District, Hunan Province, Zhuzhou Mingri Cemented Carbide Co., Ltd was established in May of 2001 with the investment of RMB 40 million and area of 33000 square meters. ...
Get in touch with us
Leave a Message, we will call you back quickly!