Guangdong Uchi Electronics Co.,Ltd
| Payment Terms | T/T, Western Union |
| Supply Ability | 10000000000pcs/Month |
| Delivery Time | 2 Weeks |
| Packaging Details | Tape in reel |
| Name | SMD Ceramic Gas Discharge Tube |
| EIA | 1812(4532) |
| Dimension | 4.5*3.2*2.7mm |
| Voltage | 90V |
| Current | 3KA |
| Capacitance | 0.5pF |
| Brand Name | UCHI |
| Model Number | SMD90XM |
View Detail Information
Explore similar products
MOV Metal Oxide Varistor
Circuit Protection Metal Oxide Varistor High energy for Televisions / Controller
Silicon Carbide Varistor / Block Varistor MOV 6.8KV For Surge Arresters
ZOV / ZNR Metal Oxide Varistor Low stand for Gas and petrol appliances
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 10000000000pcs/Month |
| Delivery Time | 2 Weeks | Packaging Details | Tape in reel |
| Name | SMD Ceramic Gas Discharge Tube | EIA | 1812(4532) |
| Dimension | 4.5*3.2*2.7mm | Voltage | 90V |
| Current | 3KA | Capacitance | 0.5pF |
| Brand Name | UCHI | Model Number | SMD90XM |
| High Light | silicon carbide varistor ，metallic oxide varistor | ||
1812 SMD Ceramic Gas Discharge Tube 4.5x3.2mm SMD90XM 90V 3KA 4532 0.5pF UN1812-90CSMD
Features
Dimension:4.5*3.2*2.7mm
Impulse Discharge Current:2KA
Working Voltage:90V,150V,200V,230V,300V,350V,400V,470V,600V
Application
1,Communication equipment
2,CATV equipment
3,Test equipment
4,Data lines
5,Power supplies
6,Telecom SLIC protection
7,Broadband equipment
8,ADSL equipment,including ADSL2+
9,XDSL equipment
10,Satellite and CATV equipment
11,General telecom equipment
12,ESD protection
Dimension (mm)
Catalogue Number
| Part. Number | DC Spark-over Voltage(V) | 1KV/μs (V) | Impulse Life | Insulation Resistance (GΩ) | Capacitance 1MHz(PF) | Nominal Discharge Impulse Current(A) |
| SMD70XM | 70(50～90) | 600 | 300 | 1 | 0.5 | 2000 |
| SMD75XM | 75(55～95) | 600 | 300 | 1 | 0.5 | 2000 |
| SMD90XM | 90(63～117) | 700 | 300 | 1 | 0.5 | 3000 |
| SMD120XM | 120(84～156) | 700 | 300 | 1 | 0.5 | 2000 |
| SMD150XM | 150(105～195) | 750 | 300 | 1 | 0.5 | 2000 |
| SMD200XM | 200(140～260) | 750 | 300 | 1 | 0.5 | 2000 |
| SMD230XM | 230(161～299) | 750 | 300 | 1 | 0.5 | 2000 |
| SMD300XM | 300(210～390) | 800 | 300 | 1 | 0.5 | 2000 |
| SMD350XM | 350(245～455) | 900 | 300 | 1 | 0.5 | 2000 |
| SMD400XM | 400(280～520) | 950 | 300 | 1 | 0.5 | 2000 |
| SMD420XM | 420(294～546) | 950 | 300 | 1 | 0.5 | 2000 |
| SMD470XM | 470(329～611) | 1000 | 300 | 1 | 0.5 | 2000 |
| SMD500XM | 500(350～650) | 1100 | 300 | 1 | 0.5 | 2000 |
| SMD600XM | 600(420～780) | 1200 | 300 | 1 | 0.5 | 2000 |
Package-Tape
Description
The SMD series has been especially designed to meet data transmission protection requirements. The optimized design features a high level of protection against fast rising transients usually caused by lightning disturbances. For use in high frequency data lines, the series offers ultra low capacitances and shows only marginally signal losses up to high frequencies. The devices are extremely reliable and are able to withstand high surge currents without destruction.
Cautions and warnings
Do not operate surge arresters in power supply networks, whose maximum operating voltage exceeds the minimum spark-over voltage of the surge arresters.
Surge arresters may become hot in the event of longer periods of current stress (burn risk). In the event of overload the connectors may fail or the component may be destroyed.
Surge arresters must be handled with care and must not be dropped.
Do not continue to use damaged surge arresters.
The shown SMD pad dimensions represent a safe way to mount the arrester and are a recommendation of the manufacturer. During the reflow process it must be assured that no solder material reduces the insulation distance between the pads below the arrester.
SMD surge arresters should be soldered within 24 month after shipment.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2006
Total Annual:
1,500,000-2,500,000
Employee Number:
138~168
Ecer Certification：
Verified Supplier
Uchi was established in 2006 in Dongguan, China. After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, ... Uchi was established in 2006 in Dongguan, China. After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, ...
Get in touch with us
Leave a Message, we will call you back quickly!