Guangdong Uchi Electronics Co.,Ltd
| Payment Terms | T/T, L/C, Western Union |
| Supply Ability | 60000 pieces per month |
| Delivery Time | 5-15 days after payment |
| Packaging Details | export package / Negotiate |
| Uc | 800V |
| CertificationCE,CQC | CE / CQC / SGS |
| Environment temperature | (-40℃~+85℃) |
| Status indicator | Green-OK; red-FAIL |
| Response time (L-N) | ≤25ns |
| In(8/20μs) | 20kA |
| Imax(8/20μs) | 40kA |
| size | 35mm/pole |
| protection level(kV) | 3.0 |
| rated voltage (VDC) | 800 |
| Continue to work voltage(VDC) | 880 |
| Brand Name | Uchi |
| Model Number | H2-PV |
| Certification | CE / SGS / ISO9001 |
| Place of Origin | Dongguan China |
View Detail Information
Explore similar products
275VAC Power Surge Protection Device , Class 1 Surge Protection EN 61643-11
AC 100KA Power Surge Protection Device Low Voltage IEC61643-1
Single Phase AC Power Surge Protection Device 385V Limp 15KA
60KA Type 2 Power Surge Protection Device EN 61643-11
Product Specification
| Payment Terms | T/T, L/C, Western Union | Supply Ability | 60000 pieces per month |
| Delivery Time | 5-15 days after payment | Packaging Details | export package / Negotiate |
| Uc | 800V | CertificationCE,CQC | CE / CQC / SGS |
| Environment temperature | (-40℃~+85℃) | Status indicator | Green-OK; red-FAIL |
| Response time (L-N) | ≤25ns | In(8/20μs) | 20kA |
| Imax(8/20μs) | 40kA | size | 35mm/pole |
| protection level(kV) | 3.0 | rated voltage (VDC) | 800 |
| Continue to work voltage(VDC) | 880 | Brand Name | Uchi |
| Model Number | H2-PV | Certification | CE / SGS / ISO9001 |
| Place of Origin | Dongguan China | ||
| High Light | 100kA Surge Protection Device SPD ，385V Surge Protection Device SPD ，Flame Retardant SPD Surge Protector | ||
HJH2-PV SPD
| NameDC Power Supply LightningDC Power Supply LightningDC Power Supply LightningProtection ModuleProtection ModuleProtection Module | |||
| Product model | HJH2-PV-500 | HJH2-PV-800 | HJH2-PV-1000 |
| Nominal capacity the flow In(kA8/20 us) | 20 | 20 | 20 |
| Maximum flow capacity lanx(kA8/20 us) | 40 | 40 | 40 |
| Protection level (kV) | 2.5 | 3 | 4 |
| Response time(ns) | 25 | 25 | 25 |
| Rated voltage(VDC) | 500 | 800 | 1000 |
| Continue to work voltage(VDC) | 550 | 880 | 1100 |
| Lleakage current 0.75U ImA( μA) | ≤20 | ≤20 | ≤20 |
| Working temperature(C) | -40℃～+85℃ | -40℃～+85℃ | -40℃～+85℃ |
Installation
The power must be cut off before Installation,strictly charged operation Series fuse ar brelker in frpnt gf liahtnina pratection madule
Please instal according to the insta lation diagram shown in connection, wherein+positive line as the negative wire, PE wire, ngt the wrong connection,After the
instllation is complete, close the circuit breaker (fuse) switch, check whether the normal work state After the installation of the module is inserted in paxce, check the anti co module is working Lightning protection mgdule during use,should be reaularly tested anves tne, feuult diEo3.nne 6t2te vnen 3 2 .co indn is gow nal nitnh red or remote alarm signal, said lightning protection module failure, should be timely repair or replacement
Parallel type power supply lghtring protection module should be installed In parallel connection line, lirm and reliable, and the requirement Of short, coarse. Straight
Installation dimensions
Application:
Main structure and working principle:
In a three-phase four-wire system, three phase lines and a zero line are protected between the ground wire and the three phase lines. Protector is in a state of high resistance under normal circumstances,When the power grid surges due to lightning strikes or other causes, the protector will immediately switch on within nanosecond time and bring the surge overvoltage into the earth, to protect electrical equipment on the power grid. when the surge voltage through the protector, and disappeared , the protector to change to a high resistance state, Thus does not affect the normal operation of the power grid.
Character
1. Class B lightning current SPD protection for equipotential connection during lightning strike
2. Install at the junction of LPZOA or LPZOB and LPZ1
3. Usually installed in the incoming low voltage main distribution cabinet
4. The protector is mounted on a standard 35MM rail
5. The protector is connected by copper wire of 6-35mm2
6. The ground wire should be more than 6MM2 of two-color wire
7. In order to prevent the failure of the surge protector from affecting the normal operation of the power grid, the protector connected to the L line shall be connected in series with a backup protector or fuse of 63A or above
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2006
Total Annual:
1,500,000-2,500,000
Employee Number:
138~168
Ecer Certification：
Verified Supplier
Uchi was established in 2006 in Dongguan, China. After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, ... Uchi was established in 2006 in Dongguan, China. After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, ...
Get in touch with us
Leave a Message, we will call you back quickly!