Payment Terms | T/T, Western Union |
Supply Ability | 2000pcs per month |
Delivery Time | 3 workdays |
Packaging Details | Packed in carton |
Products Name | Ultrasonic Welding Transducer |
Frequency | 28 khz |
Output power | 300 watt |
Joint bolt | M8*1 |
Ceramic disc Diameter | 25mm |
Qty of ceramic discs | 2pcs |
Capacitance | 1.9-2.6nf |
Amplitude | 8um |
Brand Name | QRsonic |
Model Number | QR-2528-2FZ |
Certification | CE |
Place of Origin | China |
View Detail Information
Explore similar products
35 Khz Ultrasonic Piezoelectric Transducer , Small Ultrasonic Welding Transducer
25Khz 700W Mini High Power Ultrasonic Transducer With 2pcs Ceramic Rings 50mm
38mm Diameter 28Khz Ultrasonic Vibration Transducer For Portable Spot Welding
28Khz Column Type Ultrasonic Piezoelectric Transducer 500W With 1/2-20UNF Screw
Product Specification
Payment Terms | T/T, Western Union | Supply Ability | 2000pcs per month |
Delivery Time | 3 workdays | Packaging Details | Packed in carton |
Products Name | Ultrasonic Welding Transducer | Frequency | 28 khz |
Output power | 300 watt | Joint bolt | M8*1 |
Ceramic disc Diameter | 25mm | Qty of ceramic discs | 2pcs |
Capacitance | 1.9-2.6nf | Amplitude | 8um |
Brand Name | QRsonic | Model Number | QR-2528-2FZ |
Certification | CE | Place of Origin | China |
High Light | ultrasonic piezo transducer ,high frequency ultrasonic transducer |
28Khz Piezoelectric Ultrasonic Converter with 2pcs Ceramics for Non-woven Fabric Welding
Description:
Ultrasonic welding is not radiation, it will not cause direct radiation damage to the human body. If it is harmful, it is a certain noise when ultrasonic welding plastic. The noise is different according to the frequency. The noise of 20KHZ equipment is relatively high. Smaller, the application of ultrasonic plastic welding technology in the plastics industry has become increasingly common. The use of this technology can replace the flux, adhesive, pinning or other mechanical fixing methods required in the past, thereby increasing production efficiency and reducing costs. The principle of ultrasonic welding machine is to generate 20KHz (or 15KHz) high-voltage and high-frequency signals from the generator. Through the energy conversion system, the signal is converted into high-frequency mechanical vibration, which is applied to the workpiece of plastic products and passes through the surface of the workpiece and the intrinsic molecules. Friction increases the temperature of the interface to the interface. When the temperature reaches the melting point of the workpiece itself, the workpiece interface is rapidly melted and then filled in the gap between the interfaces; when the vibration stops, the workpiece is simultaneously cooled and shaped under a certain pressure. A perfect weld is achieved.
Specifications:
Model | QR-2528-2FZ |
Frequency | 28khz |
Output power | 300 watt |
Joint bolt | M8*1 |
Ceramic disc Diameter | 25mm |
Qty of ceramic discs | 2pcs |
Capacitance | 1.9-2.6nf |
Amplitude | 8 um |
Application | Plastic welding machine |
Advantages:
1. Energy saving and environmental protection
2. No ventilation device equipped with smoke and heat dissipation
3. Low cost, high efficiency
4. Easy to achieve automated production
5. High welding strength and firm bonding
6. Beautiful solder joints, can achieve seamless welding, moisture-proof and waterproof, good air tightness Note: Thermosetting plastics can not be ultrasonically welded.
7. Fast welding speed, high welding strength and good sealing; replace traditional welding/bonding process, low cost, clean and pollution-free and will not damage the workpiece; stable welding process, all welding parameters can be tracked and monitored by software system Once the fault is found, it is easy to eliminate and maintain.
8. The welding material does not melt and is not fragile.
9. Good electrical conductivity after soldering, very low resistivity or near zero.
10. The welding metal surface is required to be low, and the oxidation or electroplating can be welded.
11. Short soldering time, no need for any flux, gas, solder.
28Khz Piezoelectric Ultrasonic Converter with 2pcs Ceramics for Non-woven Fabric Welding
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
3000000-5000000
Ecer Certification:
Verified Supplier
Hangzhou Qianrong Automation Equipment Co.,Ltd. Is the professional manufacturer of ultrasonic research, high power ultrasonic transducer development and production in China. Our main products are Ultrasonic Welding transducer, ultrasonic power supply, ultras... Hangzhou Qianrong Automation Equipment Co.,Ltd. Is the professional manufacturer of ultrasonic research, high power ultrasonic transducer development and production in China. Our main products are Ultrasonic Welding transducer, ultrasonic power supply, ultras...
Get in touch with us
Leave a Message, we will call you back quickly!