Midea Medium Static Duct FCU with Field Reversible Left Right Piping Selectable

Concealed ducted work is where drawings meet reality — and reality usually wins. The Midea Medium Static Pressure Duct Fan Coil Unit is engineered to absorb the gaps between design and as-built conditions instead of making you pay for them. On AC models, water connections reverse from left to right on site; on DC models, external static pressure is selectable at 12, 30 or 50Pa via the PCB or wired controller. Return air draws from the rear or the bottom. When the riser ends up on the wrong side or the duct run grows two extra bends, the unit adapts — no re-ordering, no return trips, no change-order arguments. One family spans 400–1200 CFM with cooling capacities from 2.35 to 13.78 kW across the AC and DC range.

At 241mm body height (261mm for DC), the chassis hides above standard ceiling grids, while three-row and four-row coil options match two-pipe or four-pipe hydraulics across new-build and retrofit jobs. The enlarged drain pan option is low-cost insurance against the call-back every contractor dreads: condensation stains on a finished ceiling. The filter assembly extracts in multiple directions, so maintenance access works however the ceiling void ended up being built — your service team will not be inventing access solutions on every visit.

The DC inverter brushless range provides seven fan speeds for precise airflow balancing at commissioning, up to 30% lower fan energy, and native V8 controller integration for jobs pairing FCUs with Midea VRF outdoor systems. XYE and PQE ports simplify central control and Modbus RTU handover to the BMS contractor. Standard supply is 220–240V / 1Ph / 50Hz; for export contracts, Hongtai provides OEM/ODM support with custom voltages from 180–440V at 50/60Hz, project branding and protocol options.

• Site-Reversible Water Connections (AC) — Swap left/right orientation on site in minutes; drawing changes do not mean re-ordering or return trips.
• Selectable ESP 12/30/50Pa (DC) — Set static pressure at commissioning to match as-built ductwork; no factory pre-configuration lead time.
• Rear or Bottom Return Air — Adapts to actual void conditions without custom plenum fabrication.
• Enlarged Drain Pan Option — Low-cost insurance against condensation leaks and ceiling-stain call-backs.
• Seven-Speed DC Motor — Precise airflow balancing per room at commissioning; fewer comfort complaints after handover.
• Multi-Direction Filter Extraction — Service access works however the void was built; faster maintenance visits.
• V8 Controller Integration — Native pairing with Midea VRF systems for combined FCU and VRF tenders.
• XYE / PQE Ports — Straightforward central control and Modbus RTU handover to the BMS contractor.
• OEM/ODM via Hongtai — Custom voltage (180–440V, 50/60Hz), branding and protocols for export and tender projects.

1. Concealed Office Ceilings — Hidden units preserve ceiling aesthetics across open-plan and partitioned floors.
2. Hotel Guestroom Ducted Installs — Quiet DC operation above the corridor ceiling; easy filter access from the room side.
3. Retail Units Behind Bulkheads — Multi-branch ducting serves sales areas from concealed positions.
4. Apartments and Serviced Suites — One SKU covers varied flat layouts thanks to site-flexible connections.
5. Hospitals and Clinics — Optional filtration and low-noise DC models suit clinical environments.

• CE Marking — European conformity for safety and electromagnetic compatibility.
• Eurovent Certified Performance — Third-party verified capacity and efficiency ratings.
• ERP Compliant — Meets EU Energy-related Products Directive requirements.
• RoHS Compliant — Restriction of Hazardous Substances directive conformance.
• GB/T 19232 — Chinese national standard for fan coil unit performance testing.