SHANGHAI JUCHU TRADING CO., LTD
| Rated Power | 180HP |
| Turning Radius | 8.8 m |
| Delivery Time | 10-20 working days after payment confirmation |
| Scarifier | 9 Teeth, Mechanical |
| Max Cut Depth | 660 mm mm |
| Packaging Details | Ro-Ro shipping or flat-rack container. Moldboard may be removed for container transport, articulation locked with transport pin, battery disconnected. |
| Payment Terms | T/T,Alipay,Bank Transfer |
| Supply Ability | 6 Units per Month |
| Moldboard | 3960×635 mm |
| Operating Weight | 18000 kg |
| Engine Model | Weichai WD10G180E23 Diesel |
| Brand Name | TIANGONG |
| Place of Origin | China |
| Certification | ISO 9001:2015, CE, ROPS/FOPS |
| Model Number | PY180M |
View Detail Information
Explore similar products
Brand Heavy Duty SEM 655D Wheel Loader 5 Ton Front End Loader New Model for Sand
Used XCMG GR165 Motor Grader 16500kg Operating Weight 3960mm Moldboard 165HP
Used CAT 140G Motor Grader with 150 HP Engine, Hydraulic-Mechanical Transmission
Xiaojianniu PY120 Used Motor Grader 12 Ton Compact Articulated Blade Machine
Product Specification
| Rated Power | 180HP | Turning Radius | 8.8 m |
| Delivery Time | 10-20 working days after payment confirmation | Scarifier | 9 Teeth, Mechanical |
| Max Cut Depth | 660 mm mm | Packaging Details | Ro-Ro shipping or flat-rack container. Moldboard may be removed for container transport, articulation locked with transport pin, battery disconnected. |
| Payment Terms | T/T,Alipay,Bank Transfer | Supply Ability | 6 Units per Month |
| Moldboard | 3960×635 mm | Operating Weight | 18000 kg |
| Engine Model | Weichai WD10G180E23 Diesel | Brand Name | TIANGONG |
| Place of Origin | China | Certification | ISO 9001:2015, CE, ROPS/FOPS |
| Model Number | PY180M | ||
| High Light | Used TIANGONG PY180M Motor Grader 18000kg ，Used TIANGONG PY180M Motor Grader | ||
This pre-owned TIANGONG PY180M motor grader is a cost-effective grader designed for developing markets, suitable for earth road construction, agricultural land preparation, and rural infrastructure development. Equipped with a 180HP Weichai WD10G180E23 Diesel diesel engine, this grader delivers precise blade control for finish grading, road maintenance, ditching, slope cutting, and surface preparation. The moldboard features hydraulic angle adjustment, side shift, and tilt functions, allowing the operator to achieve precise grading geometry for road base preparation, gravel road maintenance, and large-area surface leveling. The articulated frame steering combined with front wheel lean provides a tight turning radius and offset tracking capability for ditch cleaning and slope work. The unit has received regular preventive maintenance with detailed service logs documenting oil analysis results, cutting edge replacements, and circle wear measurements.
| Parameter | Specification |
|---|---|
| Brand & Model | TIANGONG PY180M |
| Engine Model | Weichai WD10G180E23 Diesel |
| Rated Engine Power | 180HP |
| Operating Weight | 18000 kg |
| Moldboard Length | 3960 mm |
| Moldboard Height | 635 mm |
| Moldboard Thickness | 22 mm |
| Blade Rotation Angle | 360° (Hydraulic) |
| Blade Side Shift (Left/Right) | 650/650 mm |
| Blade Tip Angle (Forward/Back) | 40°/5° |
| Blade Shoulder Reach (Left/Right) | 2050/2050 mm |
| Maximum Lift Above Ground | 450 mm |
| Maximum Cutting Depth | 660 mm |
| Scarifier Type | 9 Teeth, Mechanical |
| Scarifier Working Width | 1750 mm |
| Scarifier Penetration Depth | 260 mm |
| Front Wheel Lean Angle | ±15° |
| Articulation Angle | ±±22° |
| Turning Radius (Minimum) | 8.8 m |
| Transmission | Powershift 6F+3R |
| Maximum Travel Speed (Fwd/Rev) | 40/28 km/h |
| Tire Specification | 17.5-25 (12PR) |
| Fuel Tank Capacity | 350 L |
| Hydraulic System Pressure | 17 MPa |
| Overall Length | 8700 mm |
| Overall Width | 2600 mm |
| Overall Height (to Cab Top) | 3350 mm |
| Wheelbase (Tandem Center) | 6100 mm |
| Cabin | ROPS/FOPS Enclosed Cab, HVAC, Adjustable Operator Seat |
This TIANGONG PY180M motor grader has been inspected with focus on the unique wear components of grading equipment. The circle (slew ring) was checked for excessive play using a dial indicator — total backlash measured within the manufacturer's service limit. Moldboard cutting edge and end bits were measured for remaining wear life; cutting edge thickness is above the minimum replacement specification. The blade linkage pins and bushings (blade lift, circle shift, blade tilt cylinders) were inspected for clearance with all within acceptable range. The tandem drive chain tension was checked and adjusted to specification. Engine compression and turbocharger performance verified. Transmission clutch pressures measured within range through all gear selections. The articulated frame center-pivot bearing was lubricated and checked with no measurable vertical play. All tires exhibit even wear with tread depth above 50% of new specification. The scarifier hydraulics were tested through full raise/lower cycle with system pressure maintained.
Motor graders are typically shipped via Ro-Ro (Roll-on/Roll-off) carrier service from major Chinese ports due to their self-propelled nature and extended frame length. For destinations without Ro-Ro service, the grader can be partially disassembled (moldboard removed and packed separately, cab roof externals detached) for flat-rack container transport. Prior to shipment, the machine undergoes a comprehensive cleaning process including chassis pressure wash, engine compartment degreasing, and moldboard surface treatment to prevent sea-spray corrosion. The articulation joint is locked in the straight position with a transport pin. The battery is disconnected and the fuel tank drained to minimum safe level per IMO regulations. Complete export documents will be prepared: commercial invoice, packing list, certificate of origin, and ocean bill of lading. Approximate transit times: Southeast Asia 5-10 days, Middle East 14-20 days, Africa 20-35 days, South America 25-35 days.
A comprehensive pre-delivery inspection document is supplied with the grader, recording all measurement values and observations. We provide 7 days of remote technical assistance after the machine reaches your destination port, addressing any questions regarding start-up procedures, moldboard control calibration, circle rotation mechanism operation, and daily maintenance routines including grease fitting locations and fluid level checkpoints. A recommended wear-parts reference list is included covering: moldboard cutting edges and end bits, scarifier teeth and shanks, hydraulic filter replacement kits, circle wear inserts, and tandem drive chain tensioners. Through our international parts network, we can facilitate express courier delivery of commonly needed spares. The buyer is advised to schedule a local grader technician for arrival commissioning and to verify all blade control calibrations before operational deployment. This machine is supplied in its inspected used condition.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
300-500
Employee Number:
50~100
Ecer Certification：
Verified Supplier
SHANGHAI JUCHU TRADING CO.,LTD is committed to providing high-quality services to foreign customers, including export customs clearance services for second-hand construction machinery, procurement of second-hand vehicles, and procurement of construction machinery accessories. We can filter out the l... SHANGHAI JUCHU TRADING CO.,LTD is committed to providing high-quality services to foreign customers, including export customs clearance services for second-hand construction machinery, procurement of second-hand vehicles, and procurement of construction machinery accessories. We can filter out the l...
Get in touch with us
Leave a Message, we will call you back quickly!