TaiMi(Shenzhen) electronics technology Co.,ltd
| Payment Terms | Western Union, MoneyGram, T/T ,PAYPAL |
| Supply Ability | 10000000/Month |
| Delivery Time | 2 weeks |
| Packaging Details | safety packing |
| Output | Digital Sensor |
| Measure distance | 0.2～6m |
| Material | Aluminum |
| Max.input voltage | 20Vrms |
| Frequency | 40khz |
| USE | Dual transmitter and receiver |
| Size | 14*10mm |
| type | waterproof type |
| Brand Name | TaiMI |
| Model Number | TM-1440H10TR |
| Certification | ROHS/REACH |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
14*9 40khz Waterproof Aluminum ultrasonic sneosr Ultrasonic Level Sensor
10mm 40khz smallest Ultrasonic Transmitter Receiver Waterproof Ultrasonic
10mm 25mm 25khz 40khz Micro Waterproof Ultrasonic Transducer
16mm 14mm Transducer and receiver double use ultrasonic sensor Waterproof
Product Specification
| Payment Terms | Western Union, MoneyGram, T/T ,PAYPAL | Supply Ability | 10000000/Month |
| Delivery Time | 2 weeks | Packaging Details | safety packing |
| Output | Digital Sensor | Measure distance | 0.2～6m |
| Material | Aluminum | Max.input voltage | 20Vrms |
| Frequency | 40khz | USE | Dual transmitter and receiver |
| Size | 14*10mm | type | waterproof type |
| Brand Name | TaiMI | Model Number | TM-1440H10TR |
| Certification | ROHS/REACH | Place of Origin | CHINA |
| High Light | 40khz Ultrasonic Piezoelectric Transducer ，14mm Ultrasonic Piezoelectric Transducer ，14mm Waterproof Ultrasonic Transducer | ||
Waterproof 14mm 40khz Ultrasonic Piezoelectric Transducer Double Use
Waterproof 14mm 40khz ultrasonic piezo transducer parking sensor double use sensor
Water proof type ultrasonic sensors were widely used for parking sensors, proximity sensors and level sensors, etc. With perfect seal these sensors can be used in a relatively poor environment such as dust and humidity.
| Technical parameters | |
| Part number | TM-1440H10TR |
| Construction | Water proof type |
| Using method | Dual use |
| Center frequency | 40.0±1.0KHz |
| Sound pressure level | 105dB min. |
| Sensitivity | -82dB min. |
| Capacitance | 1900Pf±20% |
| Ringing | 1.2ms max. |
| Maximum input voltage | 150Vp-p |
| Directivity | 80°±15° (-6dB) |
| Operating temperature | -30°C~+70°C |
| Storage Temperature | -40°C~+80°C |
Specification
| Specification Item | Parameter | Remark |
| Resonant frequency | 40±1.0kHz |
|
| Echo Sensitivity | ≥150mV | Simulation test circuit see Figure 1. |
| Decay Time | ≤1.05ms | |
| Directivity (X) | 120±15° | Directivity test see Fig 2. |
| Directivity (Y) | 60±10° | |
| Electrostatic Capacitance | 1800±15%pF | 1kHz/25℃ |
| Input voltage | ≤140Vp-p | 40kHz/ pulse width 0.5ms/ interval 20ms |
| Mean Time to Failure | 50000h |
|
| Operating temperature | -35~+80℃ |
|
| Storage temperature | -35~+80℃ |
|
Dimension
5.1 Sound pressure level and sensitivity shall not change by more than 15dB in temperature range of -20°C to 60°C, at a relative humidity of 30%.
5.2 Sound pressure level and sensitivity shall not change by more than 6dB in the humidity of 10% to 90%, at the temperature of 25°.
5.3 MOISTURE
Keep the sensor at 40°C±2°C and 90°C to 95°C R.H for 96±4 hours. Then, release the sensor into the room conditions for 24 hour prior to the measurement. It shall fulfill the specifications in Table 1.
5.4 VIBRATION
Subject the sensor to the vibration for 1 hour each in the X.Y and Z axes with the amplitude of 1.5mm at 10 to 55 Hz. It shall fulfill the specifications in Table 1.
5.5 HIGH TEMPERATURE EXPOSURE
Subject the sensor to 80±5°C for 24±1 hours. then, release the sensor into the room conditions
for 1 hour prior to the measurement. It shall meet the specifications in Table 1.
5.6 LOW TEMPERATURE EXPOSURE
Subject the sensor to -30±5°C for 24±1 hours. Then release the sensor into the room conditions
for 1 hour prior to the measurement. It shall meet the specifications in Table 1.
| ITEM | SPECIFICATION |
| Center Frequency | Within ±0.5KHz |
| Echo Voltage | Within ±20mv |
| Ringing | Within ±0.2ms |
This sensor is designed for use in air. Do not use this sensor in fluid.
In case where this sensor is to be hold in housing, use soft buffer between sensor and housing. The front part of this sensor vibrates in large.
If this part is hold, its characteristics will vary. The top must be free to vibrate.
To prevent sensor malfunctions, operational failure or any deterioration of its characteristics, do not use this sensor in the following, or similar conditions.
A. In strong shock or vibration.
B. In high temperature and humidity for a long time.
C. In corrosive gases or sea breeze.
D. In an atmosphere of organic solvents.
E. In dirty and dusty environments that may contaminate the sensor front.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2009
Total Annual:
$6000000-7000000
Employee Number:
100~300
Ecer Certification：
Verified Supplier
TaiMi Electronics Technology Co.,ltd.Specialize in manufacturing & exporting of electronic Components,piezo ceramic,transduucer,senosr,and Ultrasonic Sensors of the finest quality.We are presently catering to OEM of Automotive,Defence, White Goods,Telecom,smart,Robotics,model airplanes,Comm... TaiMi Electronics Technology Co.,ltd.Specialize in manufacturing & exporting of electronic Components,piezo ceramic,transduucer,senosr,and Ultrasonic Sensors of the finest quality.We are presently catering to OEM of Automotive,Defence, White Goods,Telecom,smart,Robotics,model airplanes,Comm...
Get in touch with us
Leave a Message, we will call you back quickly!