CDINDUSTRY ( INTERNATIONAL ) . INC
| Payment Terms | L/C,T/T |
| Delivery Time | 15-20 days |
| Detection | Infrared hot-swappable, for methane, 3-100%LEL |
| Explosion & Protection | Ex d IIB T6 Gb, IP66, cast aluminum shell |
| Display & Control | 1.8-inch TFT color screen, infrared remote control |
| Signal Output | 4-20mA, RS485, alarm relay |
| Power & Consumption | DC24V, <2W, transmission ≤1000m |
| Environment | -40~70℃, 0-95%RH (no condensation), 86-106kPa |
| Life & Maintenance | Sensor life 3 years, hot-swappable replacement |
| Installation | M25×1.5 thread (adapter optional) |
| Brand Name | BOEN FIRE |
| Model Number | GT-CDI282Ex/IR |
| Certification | ISO9001、CCCF、CNEX、SIL2 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
GT-CDI2920Ex Industrial and Commercial Point-Type Flammable Gas Detector
GT-CDI2950DEx Industrial and Commercial Point-Type Flammable Gas Detector
Explosion Proof Catalytic Combustion Type Gas Detector IR Remote IP66
Point Type Combustible Gas Detector Ex Flame Proof Relay Output -40℃~70℃
Product Specification
| Payment Terms | L/C,T/T | Delivery Time | 15-20 days |
| Detection | Infrared hot-swappable, for methane, 3-100%LEL | Explosion & Protection | Ex d IIB T6 Gb, IP66, cast aluminum shell |
| Display & Control | 1.8-inch TFT color screen, infrared remote control | Signal Output | 4-20mA, RS485, alarm relay |
| Power & Consumption | DC24V, <2W, transmission ≤1000m | Environment | -40~70℃, 0-95%RH (no condensation), 86-106kPa |
| Life & Maintenance | Sensor life 3 years, hot-swappable replacement | Installation | M25×1.5 thread (adapter optional) |
| Brand Name | BOEN FIRE | Model Number | GT-CDI282Ex/IR |
| Certification | ISO9001、CCCF、CNEX、SIL2 | Place of Origin | CHINA |
| High Light | industrial flammable gas detector ，commercial point-type gas detector ，combustible gas detector with warranty | ||
GT-CDI282Ex/IR Industrial and Commercial Point-Type Flammable Gas Detector
1.Product Overview
This product is an explosion-proof device, suitable for Zone I and Zone II environments where there may be leakage or explosion hazards of flammable or toxic and harmful gases in industries such as petroleum, chemical engineering, gas storage stations, and wine factory production workshops. It is not applicable to Zone 0 or underground coal mine environments. The detector can conduct safe detection and give advance alarms for gas leakage accidents.
The detector features TFT liquid crystal display, infrared remote control, three-wire 4mA-20mA output, RS485 bus communication (Modbus RTU protocol), and passive contact output functions.
2.Product Features
(1) It adopts a 256-color TFT LCD (128*160) display and an infrared remote control function, making it convenient to adjust.
(2) It uses a hot-swappable probe sensor, which is easy to replace in different use sites.
(3) It has a zero-point calibration function, which can avoid measurement errors caused by zero-point drift.
(4) It has a standard RS485 interface based on the Modbus (RTU) protocol.
(5) It can be connected with JB-QB-CH210 combustible gas alarm controllers produced by companies such as PLC and DCS.
(6) It adopts a single-chip microcomputer processing system, with strong stability and anti-interference ability, and low power consumption.
3.Main Technical Data
| Item | Content |
| Detection Principle | Infrared (Hot-swappable Type) |
| Sampling Method | Natural Diffusion |
| Detection Range | (3~100) %LEL |
| Resolution | 1%LEL |
| Response Time | ≤30s |
| Measurement Error | Full Scale ±3%LEL |
| Low Alarm Value | 25%LEL |
| High Alarm Value | 50%LEL |
| Applicable Gas | Methane |
| Sensor Life | 3 Years |
| Display Method | TFT 1.8-inch LCD Color Screen |
| Signal Transmission Method | Standard RS485 Interface Alarm Relay Output 4mA~20mA Output |
| Signal Bus Transmission Distance | ≤1000m |
| Working Voltage | DC24V |
| Power Consumption | <2W |
| Temperature Range | -40℃~+70℃ |
| Humidity Range | 0~95%RH (No Condensation) |
| Pressure Range | 86kPa~106kPa |
| Shell Material | Cast Aluminum |
| Overall Weight | 1Kg |
| Mounting Thread | M25×1.5 (M to NPT Adapter Optional) |
| External Dimensions | 153×172×96 (mm) |
| Protection Class | IP66 |
| Explosion-proof Mark | Ex d IIB T6 Gb/Ex tb IIIC T80℃ Db |
| Note | - |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent
Year Established:
2016
Total Annual:
5000000$-7000000$
Employee Number:
50~99
Ecer Certification：
Verified Supplier
CDINDUSTRY (INTERNATIONAL). INC. (hereinafter referred to as CDI) is located in Yubei District, Chongqing City, in the southwestern part of China. Its main business covers the equipment supply and aftermarket outsourcing services in the fields of metallurgy, cement, and oil and gas fields. In additi... CDINDUSTRY (INTERNATIONAL). INC. (hereinafter referred to as CDI) is located in Yubei District, Chongqing City, in the southwestern part of China. Its main business covers the equipment supply and aftermarket outsourcing services in the fields of metallurgy, cement, and oil and gas fields. In additi...
Get in touch with us
Leave a Message, we will call you back quickly!