China factories

China factory - Guangzhou Concord Sound Industrial Co., Ltd.

Guangzhou Concord Sound Industrial Co., Ltd.

  • China,Guangzhou ,Guangdong
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement
China 800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier
China 800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier

  1. China 800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier
  2. China 800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier
  3. China 800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier
  4. China 800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier
  5. China 800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier
  6. China 800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier

800W / 1000W Powered Audio Amplifier speaker 2u Power Amplifier

  1. MOQ: 2 pieces
  2. Price: $170.00 - $1,340.00/pieces
  3. Get Latest Price
Packaging Details soft bubble inside,thick carton outside
Supply Ability 10000 Piece/Pieces per Month
Type Professional Amplifier
Channels 2 (2.0)
Product Name 2*800W 2*1000W 2*1300W 2*1600W 2U Audio Amplifier
Item No GW800/GW1300/GW1300/GW1600
Distortion <0.03%
Frequency Response 20Hz-20kHz,±0.5dB
Input Impedance 20kΩ/Balanced, 10kΩ/un-Balanced
Nominal Impedance 8Ω/4Ω
Power Supply AC: 220-230V 50Hz
Application Dj amplifier,Bar amplifier,Array speaker amplifier
Brand Name VA
Model Number GW800/GW1300/GW1300/GW1600
Place of Origin Guangdong, China

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Packaging Details soft bubble inside,thick carton outside Supply Ability 10000 Piece/Pieces per Month
Type Professional Amplifier Channels 2 (2.0)
Product Name 2*800W 2*1000W 2*1300W 2*1600W 2U Audio Amplifier Item No GW800/GW1300/GW1300/GW1600
Distortion <0.03% Frequency Response 20Hz-20kHz,±0.5dB
Input Impedance 20kΩ/Balanced, 10kΩ/un-Balanced Nominal Impedance 8Ω/4Ω
Power Supply AC: 220-230V 50Hz Application Dj amplifier,Bar amplifier,Array speaker amplifier
Brand Name VA Model Number GW800/GW1300/GW1300/GW1600
Place of Origin Guangdong, China
High Light 800W Powered Audio Amplifier1000W Powered Audio AmplifierSpeaker 2u Power Amplifier
Product Description

High Quality Powered 2*800W 2*1000W 2*1300W 2*1600W 2U Audio Amplifier

 
1. Mains Power Switch
When press the switch, the soft start circuit run for avoiding surge strike. In about 3-4 seconds, there will be a clicking
denote that soft start finished. And more 1-2 seconds later, there will be another “clicking”, the amplifier is connected with
speaker and ready to work.
2. CH-1/CH-2 Input level control
Adjust it to get the volume desired. Use CH-1 control only while amplifier is set in Bridge or Parallel mode.
3. CH-1/CH-2 Protection indicating LED
This red LED will light up when the amplifier is running un-stable or went in to thermal protection after the power elements
temperature over 90℃.
4. Clip LED
Turns on just before the maximum, distortion free, output level of the amplifier. The clip Leds may turn on shortly from time to time but they may certainly not turn on for longer periods. In this case you have to turn the output level down!— 3 —
5. Signal LED
The green signal led indicates that a music signal is present at this channel input.
6. Parallel mode indicating LED
Indicate that the amplifier is working under parallel mode, the indicator is lighten, input signal only acts on CH-1.
7. Bridge mode indicating LED
Indicate the amplifier is working under BRIDGE mode, the indicator is lighten , and the input signal only acts on CH-1
1. CH-1/CH-2 input XLR
standard XLR jack, below is the connection method;
Pin1: signal ground, Pin2: signal+, Pin3: signal-
2. CH-1/CH-2 Signal Link Output
Standard XLR (male) socket for input signal link, its Pins parallel connected with the female XLR socket so you can feed the same signal to another amplifier. Pin1: signal ground, 
Pin2: signal+, Pin3: signal- 
3.INPUT SENSITIVITY SWITCH.
With this switch you can perfectly adapt the input sensitivity of the amplifier:26dB;1.4V;0.77V
4. CH-1/CH-2 35Hz HPF.
The low cut filter cuts all undesired frequencies below 35Hz.protecting woofers against excesslve swings.
5. Output Mode Set Switch.
Select the run mode as STEREO or BRIDGE or PARALLEL
6. Resettable fuse
When the amplifier malfunctions, the fuse will automatically disconnect the circuit loop; after the trouble is removed, the fuse will automatically reset, and resume working.
7. CH-1/CH-2 output SPEAKON
Standard Speakon socket. 1+ 2+ :, 1- 2-: -
8. Binding post outputs
These posts will accept bare wire cables that connect to your speakers.
9. Mains Power Supply Cord
 
Specification
 
                    GW800
                       GW1000
Power handling
800W*2(8Ω)/1200W*2(4Ω)/2400W (8Ω)
1000W*2(8Ω)/1500W*2(4Ω)/3000W (8Ω)
Output Connections
Speakon & Binding Post
 
Frequency Response
20Hz-20KHz ±0.5dB
XLR-f
Input Sensitivity
0.775V/1.4V/26dB
XLR-m
Input Impedance
20kΩ/Balanced,10kΩ/un-Balanced
20kΩ/Balanced,10kΩ/un-Balanced
S/N Ratio
≥100dB
< 1%
THD
≤0.03%
20Hz-25kHz, ±1dB
Crosstalk @ Rated
Output/8Ω/1kHz
>70 dB
AC: 220-230V 50Hz
Damping
Factor/8Ω/1kHz
>240
12.4
Slew Rate
15V/uS
482*326*88mm
Protection
Soft Start,Short Circuit,Limiter,DC Fault,AC Line Fuse,Thermal Cut
 
Cooling system
Two steps speed fan
 
Mains Power supply
AC:220~230V 50Hz
 
Weight
23.5KG
25.2KG
Dimensions (WxDxH)
482x464.5×88 mm
 
 
GW1300
 
GW1600
 
Power handling
1300W*2(8Ω)/2000W*2(4Ω)/4000W (8Ω)
 
1600W*2(8Ω)/2400W*2(4Ω)/4800W (8Ω)
 
Output Connections
Speakon & Binding Post
 
 
 
Frequency Response
20Hz-20KHz ±0.5dB
 
 
 
Input Sensitivity
0.775V/1.4V/26dB
 
 
 
Input Impedance
20kΩ/Balanced,10kΩ/un-Balanced
 
 
 
S/N Ratio
≥100dB
 
 
 
THD
≤0.05%
 
 
 
Crosstalk @ Rated
Output/8Ω/1kHz
>70 dB
 
 
 
Damping
Factor/8Ω/1kHz
>240
 
 
 
Slew Rate
15V/uS
 
 
 
Protection
Soft Start,Short Circuit,Limiter,DC Fault,AC Line Fuse,Thermal Cut
 
 
 
Cooling system
Two steps speed fan
 
 
 
Mains Power supply
AC:220~230V 50Hz
 
 
 
Weight
26.5KG
 
27.5KG
 
Dimensions (WxDxH)
482x464.5×88 mm
 
 
 

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Trading Company

  • Year Established:

    1996

  • Total Annual:

    15 million-20 million

  • Employee Number:

    100~200

  • Ecer Certification:

    Verified Supplier

Concord Sound is a five-in-one professional audio manufacturer and system service provider integrating researching & development, manufacturing, electro-acoustic experience, technical training, and sales. Concord Sound relies on technology innovation to provide customers with a full range of pro... Concord Sound is a five-in-one professional audio manufacturer and system service provider integrating researching & development, manufacturing, electro-acoustic experience, technical training, and sales. Concord Sound relies on technology innovation to provide customers with a full range of pro...

+ Read More

Get in touch with us

  • Reach Us
  • Guangzhou Concord Sound Industrial Co., Ltd.
  • No. 36 Daping Industrial, Shatou street, Shiqiao, Panyu District, Guangzhou City, Guangzhou, Guangdong, China
  • MrXia
  • 13809778648
  • http://www.vatasa-audio.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement