Foshan Yingba Lubricating Oil CO.,LTD
View Detail Information
Explore similar products
SD-1200 GL-4 Performance Automotive Gear Oil 4L Pack MIL-L-2105 Specification
SD-1000 GL-5 Heavy-Duty Automotive Gear Oil 18L with Extreme-Pressure Protection
SD-1000 GL-5 Heavy-Duty Automotive Gear Oil 18L with Extreme-Pressure Support
API GL-4 80W90 Gear Oil Manual Transmission Gear Oil With OEM Availability
Product Specification
| High Light | GL-5 Gear Oil ，Heavy-Duty Automotive Gear Oil ，4L Pack Gear Lubricant | ||
An automotive gear lubricant positioned for the stated GL performance level, with formulation and batch controls suitable for private-label and fleet supply.
Technical compatibility must be confirmed against the equipment manual, final TDS and current product label.
Performance targets, base-oil route, additive system, packaging and test plan are aligned before production.
Extreme-pressure and anti-wear chemistry can be selected for the intended axle or gearbox duty.
The formulation is designed to help reduce wear and scuffing in applicable gear sets.
Supporting additives help manage foam, rust and non-ferrous metal compatibility.
Raw materials, formula version, blending and release data are controlled by batch.
Our work begins when qualified base oils, additives and packaging materials enter the factory. The objective is a product that can be manufactured, tested, traced and repeatedly delivered.
Application, market, performance level, viscosity, packaging, order volume and documentation are confirmed.
Supplier status, batch documents, packaging condition and relevant incoming properties are checked before use.
The approved formula, dosing order, tolerances, temperature, mixing time and tests are controlled by version.
Materials are metered, blended and sampled. Out-of-target batches remain isolated until authorized action and re-test.
Line clearance, filtration, first-piece approval, fill quantity, closure, sealing, coding and carton checks are recorded.
Finished-product tests, packaging inspection and batch documents must be complete before shipment release.
Documentation is supplied according to the final SKU, contract and market requirements. Certificates or approvals are never treated as universal across unrelated products.
Links the batch number, production date, release tests, specification limits and actual results.
Describes intended use, typical properties, performance level, viscosity grade and application guidance.
Covers hazards, handling, storage, transport, spill response and first-aid information.
Finished-product reports, validation tests or qualified third-party work can be arranged by project.
OEM is suitable when your product specification, brand and packaging are already defined. ODM starts earlier, with product positioning, formulation route, samples, packaging and validation developed together.
Market, equipment, specifications, pack size, volume, target cost and launch timing.
Verified formula, optimized formula or new ODM development route.
Sample version, internal testing, customer feedback and approved reference standard.
Container, closure, seal, artwork, carton, code and shipping configuration.
Version-controlled formula, documented process, batch testing and shipment documents.
No. It is suitable only where the equipment manufacturer permits the stated product category, performance level, viscosity or consistency grade and referenced specification.
No. A specification shown on a label or parameter sheet is not automatically an active OEM approval. Approval language requires valid, product-specific evidence.
Typical project documents include TDS, SDS/MSDS, batch COA and finished-product inspection records. Third-party reports and approvals depend on the specific SKU and project.
Through approved samples, product specifications, formula version control, qualified materials, production instructions, process and final testing, batch records and retained samples.
Include the target market, application, technical standard, viscosity or grade, pack size, estimated quantity and required documents.
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
300 million-400 million
Employee Number:
50~60
Ecer Certification：
Verified Supplier
.gtr-container-f7h9k2 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; max-width: 100%; box-sizing: border-box; line-height: 1.6; } .gtr-container-f7h9k2 p { font-size: 14px; ... .gtr-container-f7h9k2 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; max-width: 100%; box-sizing: border-box; line-height: 1.6; } .gtr-container-f7h9k2 p { font-size: 14px; ...
Get in touch with us
Leave a Message, we will call you back quickly!