AHD Car Camera Waterproof high-definition LED fill light reverse monitoring

Product Specification

AHD Car Camera Waterproof high - definition LED fill light reverse monitoring

Number Inspection Item Technical Requirements Inspection Method/Measuring Tool

1 . There is no obvious scratch feeling on the surface of the metal parts in terms of size and appearance   but there are visible linear indentations at a 30cm visual distance . Under the illumination of two 40W - 60W fluorescent lamps  at a distance of 25 - 30cm and a 45 ° angle   visually inspect the product for any appearance defects . Scratches   Finger touch and no scratch (prick) on the hand are sufficient .

2 . The assembly performance is stable and sealed . The screws are not loose . The upper and lower covers have strong knobs   and the structure of the product is assembled by hand for direct pressure   torque   opening and closing rotation  and testing

3  Electrical tests 1 .  Camera adjustment 2 .  Camera signal 3 .  Power cord 4 .  Power on test 1 .  DC12V voltage and current normal power on test   visual and functional test   visual table test 2 .  Normal force for socket combination 3 .  Normal appearance of monitoring screen 4 .  DC12V power supply test 

4  voltage test voltage (Vpp) :  11 - 14V can start the adjustable power supply normally

5 . Under normal working conditions of the image testing camera   the display should be free of spots   the image should be normal   there should be no blurring   color matching   and the display should be full visual inspection instrument

6 . Power test 11-14V   image function is normal   current test is normal   and the structure of the product is assembled by hand for pressure   torque   opening and closing rotation  and testing

7 . Waterproof test :  Immerse in 1 meter of deep water for 30 hours without water ingress or fogging .  Visual inspection

8 . High temperature test :  65 degrees Celsius .  High temperature oven .  5 hours .  80 degrees Celsius .  Oven .  2 hours .  Camera working normally .  High temperature oven

9 . Low temperature test  - 20 degrees Celsius freezer refrigerated for 5 hours   industrial grade freezer

10 . Appearance inspection :  The gaps between the docking parts are even and there is no paint peeling .  The surface is clean and visually inspected

11 . Neutral packaging   visually inspect according to the factory standard model and customer requirements

12  Other requirements customized according to customer requirements

13  Vibration mode test    1st gear strong   2nd gear medium   3rd gear low vibration test   vibration instrument

14  copy machine test power supply 12V   power on mode   24 - hour aging 12V power supply

15 . Simulate car power supply test power supply 12V - 36V   Power on mode .  Connect the recorder for testing .   Adjustable power supply+car recorder+display

16  Night Vision Effect Test Results 15 meter Clear Special Display Device Tested in a 20 meter Darkroom
Comprehensive conclusion :  Qualified £ OK £ Unqualified £

The in car camera is the core sensing device of ADAS (Advanced Driver Assistance System) .  Currently   global intelligent driving has ushered in a window of transition from L2 to L3/L4    and the number of cameras installed will increase from 3 - 8 to 8 - 12. According to CINNO Research   the number of cameras installed in passenger cars in the Chinese market will exceed 100 million in 2025   and the compound annual growth rate from 2021 to 2025 will reach CAGR 21% .
At present   in car cameras are mainly divided into front view   surround view   rear view   side view   and built - in cameras .