Y83-125 Turn-Out Hydraulic Metal Baler with 1250kN Force and 1200×700×600mm

The Y83-125 Hydraulic Metal Baler is a practical scrap metal compression machine designed for small and medium scrap yards, metal processing factories, waste material collection centers, and recycling companies. It is mainly used to compress scrap steel, scrap iron, metal offcuts, light metal waste, non-ferrous metal scrap, and other compressible metal materials into regular bales.

This model is equipped with 1250kN main pressing force, a 1200×700×600mm press box, and bale section options of 250×250mm or 300×300mm. The turn-out bale discharge structure is simple and convenient, making the machine suitable for customers who want to reduce scrap volume, improve transportation efficiency, and control equipment investment cost.

Many scrap metal recycling companies face the same problem: scrap metal has value, but loose materials occupy too much space, slow down loading work, and increase transportation cost. Light scrap steel, scrap iron offcuts, aluminum scrap, copper scrap, and other irregular materials can make yard management difficult if they are not compressed.

For small and medium recycling yards, large machines may require higher investment and more space, while small low-pressure machines may not produce stable bale density. Therefore, a 125 ton class hydraulic metal baler with stable structure, moderate power, and easy maintenance is more suitable for daily scrap compression.

The Y83-125 turn-out hydraulic metal baler uses a hydraulic system to cold press scrap metal into regular bales. The turn-out discharge structure is simple, easy to maintain, and suitable for stable daily use in small and medium recycling operations.

The 18.5kW motor provides a good balance between energy consumption and compression performance. The 250×250mm or 300×300mm bale section can be selected according to material type and transportation requirements. For customers who want to improve loading density, reduce yard space occupation, and make scrap resale easier, this metal baler machine is a practical solution.

The Y83-125 hydraulic metal baler is suitable for many scrap metal compression applications.

It can be used in scrap yards to compress scrap steel, scrap iron, and light metal waste.
It is suitable for metal processing factories handling cutting offcuts, stamping waste, and scrap ends.
It can be used by non-ferrous metal recycling companies to compress aluminum scrap, copper scrap, and similar materials.
It helps waste collection centers reduce loose scrap storage space.
It is suitable for small and medium recycling companies that want to improve loading density and transportation efficiency.

During operation, the operator loads scrap metal into the press box. After the hydraulic system starts, the main cylinder and side compression mechanism press the material into a regular bale. After the bale is formed, the turn-out cylinder discharges the finished bale for easy collection, stacking, and transportation.

The whole process is cold pressing, without heating the material. The machine has a compact structure and simple operation, making it suitable for daily scrap processing in recycling yards and metal processing factories.

If the customer mainly processes scrap steel, scrap iron, metal offcuts, light metal waste, and non-ferrous scrap, and wants to control investment cost, the Y83-125 is a suitable basic metal baler model.

If smaller bales are needed for easier handling, the 250×250mm bale section can be selected.
If the customer wants larger bales and higher bale weight, the 300×300mm bale section can be selected.
If the daily processing volume is higher or the scrap is thicker and harder, a larger tonnage model may be recommended.
If the customer prefers simple maintenance and stable bale discharge, the turn-out structure is a practical choice.

WANSHIDA has more than 40 years of experience in hydraulic recycling equipment manufacturing. With our own factory and professional engineering team, we can provide customized solutions according to scrap type, bale requirements, local voltage, and site layout.

It can process scrap steel, scrap iron, light metal waste, metal offcuts, aluminum scrap, copper scrap, and other compressible scrap metal materials.

The bale section can be 250×250mm or 300×300mm, depending on customer requirements for handling, stacking, and transportation.

Turn-out discharge is simple and easy to maintain, making it suitable for small and medium scrap yards and metal processing factories.

For a 125 ton class metal baler and normal light scrap metal compression, 18.5kW is a practical and commonly used power configuration.

Yes. Voltage and frequency can be customized according to local requirements.

We provide one year guarantee and lifelong maintenance support for the Y83-125 hydraulic metal baler. Installation guidance, operation training, maintenance suggestions, regular spare parts supply, and remote technical support are available.

If customers meet any problem during operation, they can contact us by phone, email, or online communication, and we will provide timely technical suggestions according to the machine condition.