Labtone Test Equipment Co., Ltd
| Payment Terms | T/T, L/C |
| Supply Ability | 15 Sets / Month |
| Delivery Time | 45 Working Days |
| Packaging Details | Plywood Case with Vacuum Packing |
| Sine Force Peak | 4000kg.f |
| Random Force | 4000kg.f |
| Frequency Range | DC-3000 Hz |
| Software | Sine, Random, Shock |
| Control Computer | Acer |
| Displacement | 100mm p-p |
| Machine Weight | 2700kg |
| Machine dimension | 1283L×1000D×1138H mm |
| Brand Name | LABTONE |
| Model Number | EV440 |
| Certification | SGS CE / ISTA / ISO |
| Place of Origin | Dongguang, China |
View Detail Information
Explore similar products
Dynamic Shaker Vibration Test Table Meet ASTM D9999-08 For Packaging
Compact Vibration Shaker System For Laboratory Vibration Testing
2Inch Displacement Electrodynamic Vibration Shaker For Auto Industry Vibration
Small and Simple Vibration Table For Printed Circuit Boards With IEC 60086-5
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 15 Sets / Month |
| Delivery Time | 45 Working Days | Packaging Details | Plywood Case with Vacuum Packing |
| Sine Force Peak | 4000kg.f | Random Force | 4000kg.f |
| Frequency Range | DC-3000 Hz | Software | Sine, Random, Shock |
| Control Computer | Acer | Displacement | 100mm p-p |
| Machine Weight | 2700kg | Machine dimension | 1283L×1000D×1138H mm |
| Brand Name | LABTONE | Model Number | EV440 |
| Certification | SGS CE / ISTA / ISO | Place of Origin | Dongguang, China |
| High Light | SAE J575 Vibration Shaker System ，4000kg.f Vibration Shaker System ，Random Electrodynamic Vibration Shaker | ||
Vibration Shaker System Comply with SAE J575, SAE J1211, SAE J1455, SAE J1810
Vibration testing simulates the vibration conditions that a product might experience during its lifetime but under a controlled and repeatable test environment. Vibration tests are conducted in an accredited vibration testing lab to ensure that finished products can perform safely during operation or transit and to avoid unexpected performance issues or early failure during use. Because products spend their lifetime in different environments and these environments exhibit unique vibration profiles, our vibration testing services are tailored to fit each unique environment with specific vibration control profiles.
Vibration Shaker System Specifications: EV440
| Shaker Specifications A30T44 | |
| Peak Sine (Pk) | 4000Kg.f peak (40KN) |
| Random (RMS) | 4000Kg.f r.ms (40KN) @ISO5344 |
| Shock (Pk) | 8000Kg.f peak (80KN) @6ms |
| Usable Frequency | DC～3000Hz |
| Maximum Displacement (p-p) | 100mm (4inch) intermittence,76mm (3inch) continuous |
| Max. velocity | 2m/s |
| Max. acceleration | Sine:100g (980 m/s2)；Random: 60g (588 m/s2) |
| Vertical Load Support | 500 kg |
| Body Suspension Natural Frequency (Thrust Axis) | Less than 2.5 Hz |
| Armature Diameter | Ф440 mm |
| Armature Weight | 36kg |
| Fundamental Resonance Frequency (Bare table) | 2,500 Hz (nom.) +/- 5% |
| Load Attachment Points (Standard) | 16 stainless steel M10 Inserts |
| Stray Flux Density | ＜10gauss |
| Allowable partial force | 500.N.M |
| Shaker dimensions | 1283mmL×1000mmD×1138mmH |
| Weight of Shaker | About 2700Kg |
| Power Amplifier Specifications LA40k | |
| Rated Output Capacity | 40KVA(120Vrms/380Arms) |
| Signal to Noise Ratio | Greater than 65 dB |
| Amplifier Efficiency | Greater than 90% |
| Amplifier Overall Dimensions | 650mmL×920mmD×2100mmH |
| Weight of Amplifier | About 470Kg |
| Interlock Protection | ●Input Over/Under Voltage ●Logic Fault ●Output Over Voltage/Current ●Control Power ●External ●Shaker Oil Pressure ●Module O/T ●Shaker Temp ●Shaker Travel |
The model selection of the vibration test system has the following steps:
1. Determine the test frequency range and limit peak motion (acceleration, velocity and displacement) according to the test conditions.
2. Determine the mass (DUT) of the item under test and the dimensions of the mounting surface required to bolt the DUT to a shaker table with its center of gravity (CG) over the table’s center. This may require use of a head expander and/or other mounting fixture. Determine the mass of such additional hardware including all mounting fasteners.
Look at the shaker specifications for the test system. Verify that the mass of the part under test and any mounting fixture is less than the maximum static load rating of the shaker. Verify that the component under test (or its mounting hardware) can be bolted to the shaker armature or head expander. Add the effective armature mass and expansion head mass to the mass of the object under test as well as the mass of any mounting clamps and fasteners and the mass of any accelerometers mounted on the object under test -- this is the total moving mass the shaker must move during the test. Multiply the total moving mass by the acceleration determined in step 1 to calculate the force required. Verify that the test and DUT required to determine the test frequency range, force, peak acceleration, peak velocity, and peak displacement is less than the corresponding performance rating of the selected shaker system. If this is true, the shaker chosen is acceptable. If not, a more powerful shaker is required.
Working Principle:
Application:
Services:
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
3 Million-5 Million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Labtone Test Equipment Co., Ltd. is a +20 year China manufacture of reliable, cost-effective equipments . Our superior products mainly include: Vibration Test Systems, Shock Test Systems, Bump Test Machine, Drop Tester, Transportation Simulators, Combined Environmental Test Chambers. &n... Labtone Test Equipment Co., Ltd. is a +20 year China manufacture of reliable, cost-effective equipments . Our superior products mainly include: Vibration Test Systems, Shock Test Systems, Bump Test Machine, Drop Tester, Transportation Simulators, Combined Environmental Test Chambers. &n...
Get in touch with us
Leave a Message, we will call you back quickly!