15.36kWh 12kW All In One Energy Storage System Dual MPPT Stackable Battery

15.36kWh 12kW All in One Energy Storage System with Dual MPPT Input

This all in one energy storage system combines a 15.36kWh LiFePO4 battery, 12kW pure sine wave inverter, dual MPPT solar charging and local monitoring in one floor-standing structure. It offers a practical starting configuration for projects that need substantial output power without beginning with a large multi-layer battery bank.

The integrated design reduces the need to select and position separate inverter and battery enclosures. It is suitable for homes, offices, shops, farm buildings and small commercial sites where solar energy storage, AC charging and backup power need to be managed through one coordinated platform.

Compact Battery Capacity with 12kW Output

The 15.36kWh battery and 12kW inverter perform different roles. Battery capacity determines the available energy reserve, while inverter power determines how much compatible equipment can operate at the same time.

This configuration is attractive when the project has a relatively high peak load but does not require the longer energy reserve of a 30kWh, 46kWh or 61kWh battery stack. The final selection should be based on both simultaneous power and required backup duration.

Dual MPPT Solar and AC Charging

The inverter provides two photovoltaic input channels, each rated at up to 5000W and 18A. Dual PV inputs can simplify solar-array planning when modules are installed in two orientations or divided into separate strings.

The documented MPPT operating range is 60–500Vdc, with a maximum photovoltaic open-circuit voltage of 500Vdc. Panel string voltage and current must remain within the specified limits under local temperature conditions.

A compatible utility or generator source may also provide AC charging. The inverter supports up to 120A of mains charging, while the final charging setting should remain within the battery configuration limits.

Dual AC Output and System Expansion

Two AC output channels allow the electrical design to organize different load groups. The complete AC output remains limited to 12kW, while each output channel is listed at up to 6kW when both channels are used.

The system also supports parallel operation for projects requiring additional inverter power. The planned quantity and connection arrangement should be confirmed before quotation.

RS232, RS485 and CAN interfaces, lithium battery communication and LCD monitoring support system integration and local operating checks.

15.36kWh All in One ESS Specifications

15.36kWh All in One ESS FAQ

Is this suitable when the load can reach 12kW?

The combined continuous load must remain within 12kW, while startup demand and the number of operating devices must also be reviewed.

Can two separate solar strings be connected?

Yes. The inverter provides two PV input channels, subject to the documented voltage, current and power limits.

Can the battery capacity be increased later?

The series includes larger stacked configurations. The required battery arrangement should be confirmed before ordering.

Can several systems operate in parallel?

Parallel operation is supported, but the project configuration and required output should be reviewed before quotation.

What information helps confirm the right configuration?

Provide the appliance list, peak power, required backup time, solar-panel specifications and local AC standard.

Receive a Project-Based ESS Recommendation