
SHANGHAI DUBHE ENVIRONMENTAL PROTECTION&TECHNOLOGY CO.,LTD
| Product Name | 10-30% Dosing Rate Easy Fluidization Polymer Composite Gel Biocarriers |
| Bulk Density | 12.5 +/- 0.75 dry-kg per wet-m3 |
| Fluidization | Uniform motion at low mixing energy |
| Application | Capacity tuning in new and retrofitted aeration basins |
| Dosing Rate | 10-30% allocation ratio |
| Shape | Cube, 20 +/- 2 mm |
| Service Life | >= 10 years |
| Material | Polymer composite gel |
| Brand Name | DUBHE |
| Model Number | PCG-20 |
| Certification | ISO 9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Low Sludge Production High Treatment Capacity Polymer Composite Gel Biocarriers
3-7 Day Biofilm Hanging Time Rapid Start Polymer Composite Gel Biocarriers
Excellent Hydrophilicity Oil Free Surface Polymer Composite Gel Biocarriers
pH 6-10 Wide Tolerance 1-50C Temperature Polymer Composite Gel Biocarriers
Product Specification
| Product Name | 10-30% Dosing Rate Easy Fluidization Polymer Composite Gel Biocarriers | Bulk Density | 12.5 +/- 0.75 dry-kg per wet-m3 |
| Fluidization | Uniform motion at low mixing energy | Application | Capacity tuning in new and retrofitted aeration basins |
| Dosing Rate | 10-30% allocation ratio | Shape | Cube, 20 +/- 2 mm |
| Service Life | >= 10 years | Material | Polymer composite gel |
| Brand Name | DUBHE | Model Number | PCG-20 |
| Certification | ISO 9001 | Place of Origin | China |
| High Light | 10-30% dosing rate gel biocarriers ,easy fluidization polymer composite biocarriers ,low energy mixing biofilm carrier media | ||
Dosing rate is the control lever that makes a biofilm process adjustable. Too little media and the basin cannot meet its load; too much and the mixing system cannot keep the bed in motion, so dead zones form and capacity is wasted. These polymer composite gel biocarriers are light enough to fluidise uniformly at low mixing energy, which is what allows a wide, workable allocation ratio of 10% to 30% of tank volume.
The carriers are cubes of roughly 20 mm at a bulk density of 12.5 ± 0.75 dry-kilograms per wet cubic metre. In the swollen state they are only slightly denser than water, so a modest air flow or mechanical mixer moves the entire bed rather than just the surface layer. That means no settling blanket on the tank floor, no orbiting mass of media in one corner, and no need to oversize blowers to keep the fill suspended. Capacity can be tuned by adding or removing fill in steps instead of rebuilding the basin.
Technical Specifications| Item | Specification |
|---|---|
| Material | Polymer composite gel (hydrophilic hydrogel) |
| Shape | Cube |
| Size | 20 ± 2 mm (hydrated state) |
| Bulk Count | 125,000 pcs/m³ |
| Specific Surface Area (BET) | ≥ 15,000 m²/m³ |
| Protected Specific Surface Area | ≥ 5,000 m²/m³ |
| Porosity | 98% |
| Dosing Rate | 10–30% allocation ratio (5–25% volumetric dosing) |
| Allocation Ratio | 10–30% |
| Biofilm Hanging Time | 3–7 days |
| Applicable pH | 6–10 |
| Working Temperature | 1–50 °C |
| Density | 12.5 ± 0.75 dry-kg / wet-m³ |
| Service Life | ≥ 10 years |
Q: Why is the dosing range so wide, from 10% to 30%?
A: Because the carriers fluidise easily, the bed stays fully mixed across a broad fill range. Low fills suit lightly loaded or polishing duty, while fills near 30% are used where the basin must carry a high volumetric load. The exact point is set by influent COD and ammonia load, not by mixing limits.
Q: Will a higher fill force me to upgrade the blowers?
A: Usually not. The carriers are close to neutral buoyancy once swollen, so suspension requires far less energy than dense media. In most retrofits the existing aeration system can keep a 20% to 30% fill in motion, with aeration energy going to oxygen transfer instead of lifting.
Q: How is the fill actually adjusted on site?
A: Carriers are added or removed as a batch. Because they settle quickly and distribute evenly, the bed re-establishes uniform coverage within hours of a top-up, so capacity can be tuned during a normal maintenance window.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2019
Total Annual:
10000000-20000000
Employee Number:
>100
Ecer Certification:
Verified Supplier
Shanghai DUBHE Environmental Protection &Technology Co., Ltd. is a leading enterprise in the wastewater treatment market, providing comprehensive solutions and high-quality equipment. Our expertise covers a wide range of products, including various aeration devices (U.S. SSI), blowers, sludge ... Shanghai DUBHE Environmental Protection &Technology Co., Ltd. is a leading enterprise in the wastewater treatment market, providing comprehensive solutions and high-quality equipment. Our expertise covers a wide range of products, including various aeration devices (U.S. SSI), blowers, sludge ...
Get in touch with us
Leave a Message, we will call you back quickly!