Eco-Friendly Water-Based Primer & Topcoat System for Pet Wooden Houses | Non

Transform and protect your furry friend's habitat with the ultimate professional-grade, pet-safe wood coating system. Designed specifically for indoor and outdoor pet wooden houses, dog kennels, and rabbit hutches, our low-odor, zero-VOC water-based formula delivers unmatched durability without compromising safety.

• 100% Pet-Safe & Family-Friendly: Ultra-low VOC, zero formaldehyde, and completely free from harmful chemicals including benzene, free TDI, alkylphenol ethoxylates (APEO), heavy metals (lead, copper, aluminum), phthalates, and PAHs. Certified by SGS and compliant with strict EU heavy metal regulations.
• Superior Anti-Yellowing Technology: Advanced UV-resistant polymers prevent discoloration, keeping white and light-colored wood finishes bright and clear over time.
• Multi-Layer Wood Protection:
  • Sealing Primer: Locks in natural wood oils, wood tannins, and resins to prevent bleed-through while boosting topcoat adhesion.
  • Foundation Primer: Increases surface fullness, saves on topcoat material and sands down smoothly for a flawless base.
  • Topcoat: Delivers exceptional scratch resistance, water repellency, mold prevention, and defense against daily liquid spills.
• Low Odor & Non-Flammable: Water-based formulation allows for comfortable indoor application with minimal odor and safe, easy water cleanup.

Compared with traditional solvent varnish, this water-based wood coating offers lower odor, easier cleanup, and a clearer finish that helps reduce yellowing. The sealing primer blocks oils and tannins, the primer adds fullness and sanding smoothness, and the topcoat delivers scratch resistance, water resistance, mold resistance, and UV durability.

It is a practical choice for wood surfaces close to daily family life, including pet houses, indoor furniture, cabinet panels, and decorative joinery.

Application Tools: Brush / Spray gun / Gloves (For specific processes, please consult our company)

The surface to be coated must be clean, free of grease and debris, and confirmed to be dry. Stir the product thoroughly and evenly before use.

The actual paint consumption may vary depending on the roughness of the surface and the dilution ratio. Add 0-10% clean water as needed for adjustment.

If drying conditions are available, allow the coating to level for approximately 10 minutes, then dry at 60°C for 30 minutes. After cooling, the product can be packaged 12 hours later. This product should be applied in a clean, dry, well-ventilated environment at 10-40°C.

3-7 days at 25°C. At lower temperatures (not below 5°C), extend the curing time appropriately to achieve an ideal film effect.

During breaks in application and after completion, promptly clean all tools with clean water.

• Is this coating safe for pet wooden houses?
  Yes. It is a low-odor, water-based system designed for pet wood structures. Allow the coating to fully cure before pet use.
• What wood species is this system compatible with?
  It works exceptionally well on both softwoods (pine, fir) and hardwoods (oak, walnut, maple, birch), as well as engineered wood products like MDF and plywood.
• Will the finish turn yellow?
  The UV-resistant topcoat is designed to help resist yellowing, especially on light-colored wood.
• How should I maintain the surface?
  Wipe with a soft damp cloth. Avoid harsh solvents, abrasive pads, and prolonged standing water.
• How many total coats do I need for optimal durability?
  For standard pet houses and furniture, we recommend a 3-step system: 1 coat of Sealing Primer, 1-2 coats of Foundation Primer, and 1-2 coats of Topcoat.
• Are you a professional coating manufacturer?
  Yes. We specialize in water-based coating production with more than 10 years of manufacturing experience and established quality management systems.