| Contact material | Nickel plated copper |
| Delivery Time | 7-15 days |
| Packaging Details | 10 pcs per bag, export carton with divider, palletised for container loading |
| Rated current | 4A per contact |
| IP protection rating | IP67, IP68 available |
| Cable outer diameter | 5.0 - 8.0 mm |
| Payment Terms | L/C,D/A,D/P,T/T |
| Housing material | Over-moulded PVC |
| Rated voltage | 250V AC/DC |
| Supply Ability | Can produce 10 million sets of wire harnesses annually |
| Contact configurations | 6 pins |
| Operating temperature | -25 to +85 C |
| Thread specification | M12 x 1.0 |
| Certification | UL, CE certification |
| Brand Name | kenhon |
| Place of Origin | Shenzhen, Guangdong, China |
| Model Number | M12 6 Pin PVC Waterproof Plug |
View Detail Information
Explore similar products
5 Pin Waterproof Wire Harness M8 Copper Conductor PVC Insulated Cable
4P 6 Core M6 M7 M8 Male Female Cable Connector Plug IP65 Waterproof For Electric
M12 2 Pin Waterproof Connector Plug Socket Power Cable Copper Contact LED
M12 Waterproof Plug 2P 3P 4P 6P 7P Assembly Cable Automotive Circular Connector
Product Specification
| Contact material | Nickel plated copper | Delivery Time | 7-15 days |
| Packaging Details | 10 pcs per bag, export carton with divider, palletised for container loading | Rated current | 4A per contact |
| IP protection rating | IP67, IP68 available | Cable outer diameter | 5.0 - 8.0 mm |
| Payment Terms | L/C,D/A,D/P,T/T | Housing material | Over-moulded PVC |
| Rated voltage | 250V AC/DC | Supply Ability | Can produce 10 million sets of wire harnesses annually |
| Contact configurations | 6 pins | Operating temperature | -25 to +85 C |
| Thread specification | M12 x 1.0 | Certification | UL, CE certification |
| Brand Name | kenhon | Place of Origin | Shenzhen, Guangdong, China |
| Model Number | M12 6 Pin PVC Waterproof Plug | ||
| High Light | M12 6 Pin PVC Waterproof Plug ,IP68 Sealed Outdoor Power Socket ,Screw Locking Copper Contact Connector | ||
The PVC six-position M12 waterproof connector is a moulded plug-and-socket set built for permanent outdoor power distribution. A twelve-millimetre metric thread and an over-moulded PVC body form one gapless shell around the contact block, so rain, cutting fluid, washdown detergent and road spray never reach the current-carrying parts. Six contacts sit on a keyed insert, which lets a technician mate the two halves in seconds while making reversed engagement physically impossible. Because cable and shell are bonded into a single piece, no separate gasket, cable gland or strain-relief clamp has to be stocked or fitted, and the weakest leak path of a two-piece metal housing is removed from the design entirely.
Each unit is assembled with oxygen-free copper pins, then potted and cured so that the rear termination stays sealed even when the cable is flexed repeatedly. The result is a low-cost, corrosion-immune interface for garden and architectural lighting, pump and valve control, outdoor sensor runs and temporary site power, where a metal connector would slowly oxidise at the thread and eventually seize.
Why This Moulded Interface Works in Wet Areas| Parameter | Specification |
|---|---|
| Product designation | M12 six-pin moulded PVC waterproof connector, plug and socket set |
| Thread specification | M12 x 1.0 metric |
| Contact count | 6 pins, keyed polarised insert |
| Rated voltage | 250V AC / DC |
| Rated current | 4A per contact |
| Contact resistance | 10 mΩ maximum |
| Insulation resistance | 100 MΩ minimum at 500V DC |
| Withstand voltage | 1500V AC for 1 minute |
| Ingress protection | IP67 standard, IP68 available |
| Operating temperature | -25°C to +85°C |
| Shell material | Over-moulded PVC, flame retardant grade |
| Contact material | Oxygen-free copper, nickel plated |
| Cable outside diameter | 5.0 mm to 8.0 mm |
| Mating cycles | 500 cycles minimum |
| Compliance | RoHS and REACH |
Landscape and facade lighting installers use the six-pin body to carry live, neutral, earth and two dimming cores through a single sealed joint, cutting the number of cable runs across a garden or car park. Pump and valve builders fit it on float-switch and solenoid harnesses that sit in sumps or plant rooms where condensate is constant. Outdoor sensor networks, conveyor washdown stations, refrigeration cabinets and temporary site distribution boards all rely on the moulded PVC shell because it survives hose-down cleaning and repeated re-mating through a season of maintenance work.
Packaging and Quality AssuranceEvery set leaves the line after a 100 percent insulation and continuity test, with a sample batch pulled for hydrostatic and thermal-shock verification. Parts are bagged in tens, boxed in export-grade corrugated cartons with an inner divider, and palletised for container loading; custom carton printing and barcoded labels can be arranged for distributor stock. Standard orders ship in 7 to 15 days, and OEM cable length, shell colour and pin allocation changes are accepted from 100 sets.
Company Details
Business Type:
Manufacturer
Year Established:
October 20
Total Annual:
>50 million RMB
Employee Number:
>100 people+
Ecer Certification:
Verified Supplier
Shenzhen Jianhong Technology Co., Ltd. Shenzhen Jianhong Technology Co., Ltd. is a professional and reliable manufacturer specializing in the R&D, production and sales of high-quality waterproof connectors. With 20 years of rich manufacturing experience in the connector industry, we have been ... Shenzhen Jianhong Technology Co., Ltd. Shenzhen Jianhong Technology Co., Ltd. is a professional and reliable manufacturer specializing in the R&D, production and sales of high-quality waterproof connectors. With 20 years of rich manufacturing experience in the connector industry, we have been ...
Get in touch with us
Leave a Message, we will call you back quickly!