Yixing Bluwat Chemicals Co., Ltd.
| Appearance | Yellow powder |
| Chemical name | Polyaluminium Chloride |
| Delivery Time | Within 15 workdays recdive the payment or L/C |
| Basicity | 45-85% |
| Typical solid-product dosage | About 1-15 g/MT; determine the optimum by jar test |
| Payment Terms | L/C, T/T, D/P,, D/A, Western Union |
| Drying type | Spray dried |
| Water-insoluble matter | 0.1% max. |
| Supply Ability | 3500 tons per month |
| Preparation concentration | 2-20% solution before dosing |
| Al2O3 content | 30% min. |
| Product model | PAC-02 |
| Packaging Details | 25kg inner plastic bag with polypropylene woven outer bag |
| Standard packaging | 25kg inner plastic bag with polypropylene woven outer bag |
| Certification | ISO Halal ZDHC |
| Model Number | Blufloc PAC Series |
| Place of Origin | China |
| Brand Name | BLUWAT |
View Detail Information
Explore similar products
CAS 1327-41-9 Polyaluminium Chloride PAC Dringking Waer Treatment
Ecuador 30% Al2O3 Aluminum Polychloride Light Yellow Powder For Water Treatment
70% - 90% Basicity White Polyaluminium Chloride Powder PAC Water Purification
White Powder Polyaluminium Chloride Pac For Drinking Water Treatment
Product Specification
| Appearance | Yellow powder | Chemical name | Polyaluminium Chloride |
| Delivery Time | Within 15 workdays recdive the payment or L/C | Basicity | 45-85% |
| Typical solid-product dosage | About 1-15 g/MT; determine the optimum by jar test | Payment Terms | L/C, T/T, D/P,, D/A, Western Union |
| Drying type | Spray dried | Water-insoluble matter | 0.1% max. |
| Supply Ability | 3500 tons per month | Preparation concentration | 2-20% solution before dosing |
| Al2O3 content | 30% min. | Product model | PAC-02 |
| Packaging Details | 25kg inner plastic bag with polypropylene woven outer bag | Standard packaging | 25kg inner plastic bag with polypropylene woven outer bag |
| Certification | ISO Halal ZDHC | Model Number | Blufloc PAC Series |
| Place of Origin | China | Brand Name | BLUWAT |
| High Light | 45-85% basicity polyaluminium chloride ，25kg bag PAC-02 water treatment ，polyaluminium chloride for municipal water plants | ||
Spray-dried solid PAC developed for repeatable preparation, routine dose control and continuous municipal raw-water clarification.
In municipal water-plant coagulation, the practical objective is to maintain repeatable clarification, documentation and supply continuity at plant scale. PAC-02 is used as a coagulant, not as a complete treatment system.
Its role is to provide a spray-dried solid coagulant that can be prepared on site and controlled by routine testing. The grade is positioned for drinking-water and general process-water applications, and its spray-dried form dissolves rapidly when the solution is prepared correctly.
The relevant feed is typically continuous municipal raw-water flow. The main difficulty is that raw-water variation, dosing accuracy and mixing energy all influence whether the same product produces consistent results.
As a result, untreated water may show unstable turbidity, weak settling, short filter runs or poor solid-liquid separation. A useful product page must distinguish the removable suspended or colloidal fraction from dissolved contaminants that require other processes.
The recommended role for PAC-02 is to provide a spray-dried solid coagulant that can be prepared on site and controlled by routine testing. It is normally applied in the main coagulation stage before flocculation, sedimentation or DAF and final filtration.
When PAC hydrolyzes in water, positively charged aluminium species reduce particle repulsion. Hydroxide floc then enmeshes fine matter and creates aggregates that can be settled, floated or filtered. Effective rapid mixing must distribute the coagulant before slower floc growth begins.
| Parameter | Specification |
|---|---|
| Product model | PAC-02 |
| Chemical name | Polyaluminium Chloride |
| Appearance | Yellow powder |
| Al2O3 content | 30% min. |
| Basicity | 45–85% |
| Water-insoluble matter | 0.1% max. |
| Drying type | Spray dried |
| Preparation concentration | 2–20% solution before dosing |
| Typical solid-product dosage | About 1–15 g/MT; determine the optimum by jar test |
| Standard packaging | 25kg inner plastic bag with polypropylene woven outer bag |
Relevant use cases include city waterworks, district plants and high-throughput potable-water systems.
Operators should follow chemical preparation concentration, dose, turbidity, pH, sludge production and batch traceability. These indicators show whether the treatment target is being achieved and whether the dose is creating unnecessary sludge or downstream carryover.
PAC is a pre-hydrolyzed inorganic polymeric coagulant. After dispersion, its cationic aluminium species adsorb on negatively charged particles and reduce the electrical barrier that keeps them apart. As hydrolysis continues, aluminium hydroxide floc provides a sweep-coagulation surface that captures fine particles.
Separation performance therefore depends on product dose, pH, alkalinity, mixing sequence, flocculation time and the selected settling, DAF or filtration equipment.
PAC-02 is prepared on site at a controlled concentration using clean water.
The coagulant is distributed throughout the continuous raw-water flow.
Floc grows under controlled mixing and is removed by sedimentation or DAF.
Clarified water proceeds to filtration and the remaining treatment barriers.
Characterize the continuous municipal raw-water flow, including pH, turbidity or TSS and the contaminants that may remain dissolved.
Prepare the solid PAC as a 2–20% solution with clean water. Allow complete dispersion and keep the solution system clean.
Run a jar test around the TDS reference range of about 1–15 g/MT and reproduce the intended process position: in the main coagulation stage before flocculation, sedimentation or DAF and final filtration.
Use rapid mixing for coagulant distribution, then slower mixing for floc growth. Avoid excessive shear after the floc has formed.
Select the lowest stable dose that meets the target while monitoring chemical preparation concentration, dose, turbidity, pH, sludge production and batch traceability.
Choose PAC-02 because PAC-02 balances 30% minimum Al2O3, low insolubles and broad basicity for municipal operation. Start with the product specification, but make the final selection on representative water.
Compare at least three doses, include the current coagulant as a control and keep pH, mixing energy and settling time consistent. The TDS gives about 1–15 g/MT for solid PAC as a general reference; the optimum may differ with the water and must be confirmed by laboratory and plant trials.
PAC-01 and PAC-02 are the starting grades for drinking-water and cleaner process-water duties. PAC-01 is white with 45–55% basicity, while PAC-02 is yellow with 45–85% basicity. PAC-031 is the industrial grade with 29% minimum Al2O3, 50–90% basicity and a higher allowable insoluble fraction. Grade selection should reflect treated-water requirements, feed variability and total treatment cost rather than color alone.
Bluwat Chemicals has manufactured water-treatment chemicals since 2000. The company operates three production bases, exports to more than 80 countries and has served over 5,000 industrial customers. For municipal water-plant coagulation, this experience supports grade matching, sample evaluation and communication between the buyer, sales team and technical team before scale-up.
Direct factory support includes batch COA, current TDS and SDS documents, packing checks and traceable quality control for the selected PAC grade. Buyers can compare PAC-02 with other PAC grades using actual water rather than relying only on product color or one headline parameter.
Solid PAC is packed in a 25kg inner plastic bag with a polypropylene woven outer bag. Store the sealed original package in a cool, dry place away from heat, flame and direct sunlight.
Prepare a 2–20% solution before dosing, using clean water and sufficient mixing. Do not use wet, contaminated or severely caked material without evaluation.
It is a candidate grade because PAC-02 balances 30% minimum Al2O3, low insolubles and broad basicity for municipal operation. Suitability must still be verified with the actual water, treatment objective and downstream process.
The supplied TDS gives about 1–15 g/MT for solid PAC as a general reference. Start with a dose-response jar test and confirm the result at plant scale; do not copy a dose from another site.
Prepare a 2–20% solution using clean water and adequate mixing. Avoid dumping dry powder directly into a poorly mixed tank, and protect the stored product from moisture.
Track chemical preparation concentration, dose, turbidity, pH, sludge production and batch traceability. Also verify the limitation that local drinking-water rules and plant validation take precedence over generic guidance.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2004
Total Annual:
20000000-30000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
.btn-page { width: 100%; box-sizing: border-box; font-family: Arial, "Helvetica Neue", Helvetica, sans-serif; color: #2f3a45; font-size: 16px; line-height: 1.75; } .btn-page *, .btn-page *::before, .btn-page *::after { box-sizing: border-box; } .btn-page ... .btn-page { width: 100%; box-sizing: border-box; font-family: Arial, "Helvetica Neue", Helvetica, sans-serif; color: #2f3a45; font-size: 16px; line-height: 1.75; } .btn-page *, .btn-page *::before, .btn-page *::after { box-sizing: border-box; } .btn-page ...
Get in touch with us
Leave a Message, we will call you back quickly!