Jinzhou City Shitan Machinery Equipment CO. LTD.
| Payment Terms | T/T, Western Union |
| Supply Ability | 1000/month |
| Delivery Time | 5-8days |
| Packaging Details | Wooden case (bare) |
| Product Name | Pneumatic Drilling Rig ST 260 |
| Drilling diameter | 105-260mm |
| After-sales service provided | Water Well Drilling Rig |
| Warranty | 1 Year |
| Power type | Diesel |
| Color | Yellow |
| Weight | 6T |
| Rotary Head Storke | 3.4m-6.0m |
| Rated Power | 55-132KW |
| Optional accessories | 70KW |
| Weight of the rig | 4m×1.7m×2.2m |
| Air pressure | 16-55m³/min |
| Brand Name | SHITAN |
| Model Number | ST 260 |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Small Crawler 380v Pneumatic Drilling Rig For 200m
260m Percussive Pneumatic Drilling Rig Crawler Machine
Project Deep Water Pneumatic Drilling Rig 400m
Diesel 400m Depth Pneumatic Crawler Drill Water Well Rig
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 1000/month |
| Delivery Time | 5-8days | Packaging Details | Wooden case (bare) |
| Product Name | Pneumatic Drilling Rig ST 260 | Drilling diameter | 105-260mm |
| After-sales service provided | Water Well Drilling Rig | Warranty | 1 Year |
| Power type | Diesel | Color | Yellow |
| Weight | 6T | Rotary Head Storke | 3.4m-6.0m |
| Rated Power | 55-132KW | Optional accessories | 70KW |
| Weight of the rig | 4m×1.7m×2.2m | Air pressure | 16-55m³/min |
| Brand Name | SHITAN | Model Number | ST 260 |
| Certification | ISO | Place of Origin | China |
| High Light | mud pump pneumatic water well drilling ，260 meters pneumatic water well drilling ，380v pneumatic drilling machine | ||
St 260 Pneumatic Drilling Rig
ST 260 Pneumatic Drilling Rig Introduction
This is a lightweight, efficient, versatile drilling hole equipment, which borehole drilling machine is mainly applied in drilling wells, irrigation wells, geothermal wells and air holes for other purposes, especially for mountain and rock formation water engineering. The water well drilling rig machine can work on different formations, well drilling diameter up to 245mm.
ST 260 Pneumatic Drilling Rig Tech information
| ST 260 Pneumatic Drilling Rig | 260 meters |
| Dia.hole | φ105-260mm |
| Advance Length one time | 6.6m |
| Working pressure | 1.7-3.0MPa |
| Air consumption | 17-35m³/min |
| Length of rod | 1.5m,2m,3m,6m |
| Dia. Of rod | φ76, φ89,φ102,φ114 |
| Lifting power | 24T |
| Rotation torque | 8500-11000N.m |
| Rotation Speed | 40-70r/min |
| Diesel Engine | Yuchai |
| Engine Power | 85Kw/2200rpm |
| Travelling speed | 0-2.5 Km/h |
| Climb capacity | 30° |
| Weight | 9000kgs |
| Dimension | 5900x2000x2850mm |
| Application | Complicated geological conditions:Rock,Mud,Sand etc. |
| Drilling Way | Top drive hydraulic rotary and propulsion,Dth Drilling or Mud Pump Driling |
| Dth Hammer | 4",5",6",8" Drill hammer or CIR110, 130, 150,170 |
ST 260 Pneumatic Drilling Rig Features
1. The engine uses a high-power engine;
2. Walking device: the walking motor is equipped with a gear box, which is durable and has a long life;
3. Hydraulic oil pump; parallel gearbox design with separate oil pump units, sufficient power supply and reasonable distribution, unique hydraulic system design, simple maintenance and low cost;
4. Power head device; gearbox is cast in one piece, dual motors provide power, large torque, durable, and low maintenance cost;
5. Drilling rig chassis; professional excavator chassis, durable, large load-bearing, wide chain plate, little damage to hard roads;
6. Lifting force; patented design composite boom, the boom is small in size, long stroke, double cylinder lifting, large lifting tonnage;
7. The lifting boom of each drilling rig is equipped with a stopper to protect the safety of the oil cylinder and ensure the safety of work;
8. Each hydraulic oil pipe is covered with a protective jacket to make the service life of the oil pipe longer.
1. After the drilling structure of the drill bit of the water well drilling rig is drilled, the central drilling tool needs to be replaced in time. First, the hole bottom needs to be cleaned, and then the residue at the hole bottom needs to be blown away. After the drill bit stops rotating, the drilling tool in the water well drilling rig can be lifted up slowly. When the lifting force is just enough to lift the drilling tool, it is the most appropriate.
2. During the drilling process, the drill bit of the water well drilling rig shall be summarized. It is also necessary to carefully observe the follow-up situation of the casing, timely understand the specific situation in the hole, and keep the hole clean when necessary. Moreover, the drill bit in the water well drilling rig shall not be pulled out by force during the drilling process.
3. Sometimes there will be more residual rock slag at the bottom of the hole of the water well drilling rig, and the rotating part of the eccentric bit will be stuck by the rock slag, which will affect its retraction and production. At this time, it is necessary to transport air pressure, clean the hole again, make the DTH hammer work in a short time, and then lift the central drilling tool again.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2010
Total Annual:
50000000-100000000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Jinzhou City Shitan Machinery Equipment CO. LTD. is a professional production and processing company for core drilling rigs, crawler drilling rigs, various track chassis, various types of mud pumps, various track transport vehicles, etc. It is one of the outstanding manufacturers o... Jinzhou City Shitan Machinery Equipment CO. LTD. is a professional production and processing company for core drilling rigs, crawler drilling rigs, various track chassis, various types of mud pumps, various track transport vehicles, etc. It is one of the outstanding manufacturers o...
Get in touch with us
Leave a Message, we will call you back quickly!