50mm Rubber Ceramic Wear Liners White In Convenient Construction

Product Specification

Product Description

The characteristics of the wear-resistant liner ceramic: It has the characteristics of wear resistance, impact resistance, corrosion resistance, high-temperature resistance, and convenient construction. Powder, mineral concentrate, tailings, cement, etc.) ideal material for the surface of conveying equipment, which is very reliable in high corrosion and high wear environments. Its service life is ten times longer than that of cast stone, wear-resistant alloy, cast steel, and other materials. Zirconium oxide composite alumina (ZTA) toughened lining board can reach more than 5 times that of alumina wear-resistant ceramics. Zirconia wear-resistant liners have higher fracture toughness, high bending strength, and high wear resistance, and are used in high-end anti-wear fields.

Product introduction

There are three ways to line the equipment

1. Use special super glue to paste the rubber composite wear-resistant liner ceramic inside the equipment.

2. The ceramic rubber steel plate integrated vulcanization technology wear-resistant liner ceramic is fixed on the surface of the equipment with bolts to form a very strong anti-wear layer.

3. The ceramic rubber steel plate is integrated vulcanized, and the combination is very strong; each liner has a countersunk bolt passing through The bottom steel plate is firmly welded and double-insured. It combines the high hardness of ceramics and the advantages of rubber's cushioning and anti-fatigue properties, which can well solve the problem of anti-wear during the transportation of bulk materials. In addition to having good anti-wear and anti-corrosion effects, rubber can also prevent production shutdown due to material accumulation and reduce noise.

4. Paste the alumina ceramics on the steel plate with glue, and fix the back with bolts to form a very strong anti-wear layer.

Product classification

Classification of liner ceramic products: wear-resistant ceramic tiles (plates sheets), zirconium aluminum composite plates, wear-resistant pipe linings, cyclone linings, two-in-one/three-in-one ceramic vulcanized rubber plates, etc.

Product use

It is suitable for cyclone wear-resistant lining, pipeline, and elbow lining, ceramic vulcanized rubber liner three-in-one (two in one), chute wear-resistant lining, equipment accessories, and other wear-resistant conditions.

Application areas

Anti-wear conditions such as material conveying equipment, chutes, hoppers, pipelines, powder separation equipment, ball milling equipment, and other industries in steel, thermal power, coal, chemical, cement, ports, mining, and other industries.

Corporate advantages

1. Strong mold research and development capabilities, outstanding advantages for non-standard customized special-shaped products, welcome to consult and customize.

2. The factory is a manufacturing enterprise dedicated to the production, design research and development of wear-resistant ceramics for 15 years.

3. Years of practical experience in the industry can provide the best and best anti-wear design for enterprise equipment.

Technical parameters

Ceramics: wear-resistant ceramics (92% 95% 99% ZTA)

Rubber classification: ordinary rubber/heat-resistant rubber (150℃)/cold-resistant rubber (-50℃)/flame-retardant rubber.

Operating temperature: -50°C to 150°C

Applicable medium: lump materials such as coal, coke, slag, cement clinker, limestone, etc.

Scope of application: Suitable for chutes and hoppers of low-temperature bulk material conveying systems. Such as coal drop pipe, coal drop bucket, vibrating screen, etc.

Commonly used ceramic specifications: 15/20/25/30/50/63mm