China factories

Chat Now Send Email
China factory - Shanghai Weihu Pump Co., Ltd.

Shanghai Weihu Pump Co., Ltd.

  • China,Shanghai ,Shanghai
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China 200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW
China 200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW

  1. China 200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW
  2. China 200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW
  3. China 200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW
  4. China 200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW
  5. China 200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW
  6. China 200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW

200QJ Deep Well Submersible Pump with 32 m³/h Flow, 112 m Head, and 18.5 kW

  1. MOQ:
  2. Price:
  3. Get Latest Price
Rated head 112 m
Motor protection Overload, phase-loss, abnormal-voltage, dry-running
Minimum well diameter 200 mm
Outlet size 3 inches
Motor power 18.5 kW
Rated flow 32 m³/h

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Rated head 112 m Motor protection Overload, phase-loss, abnormal-voltage, dry-running
Minimum well diameter 200 mm Outlet size 3 inches
Motor power 18.5 kW Rated flow 32 m³/h
High Light 32 m³/h Flow Deep Well Submersible Pump ,112 m Head Submersible Well Pump ,18.5 kW Motor 200QJ Pump
200QJ Deep Well Submersible Pump – 32 m³/h, 112 m Head, 18.5 kW
Product Overview

The 200QJ deep well submersible pump is engineered for extracting clean water from deep wells and boreholes. It delivers a rated flow of 32 m³/h at a rated head of 112 m, powered by an 18.5 kW (25 HP) motor with a 3-inch discharge outlet. Ideal for groundwater extraction, agricultural irrigation, storage-tank filling, and clean-water supply systems.

Technical Specifications
Model 200QJ
Rated Capacity 32 m³/h
Rated Head 112 m
Motor Power 18.5 kW (25 HP)
Outlet Size 3 inches
Minimum Well Diameter 200 mm
Design & Structure

The pump and submersible motor form a vertical unit operating below water level. Water enters through the submerged inlet, passes through the hydraulic section, and is discharged through the 3-inch outlet into the rising pipe.

Key Advantages
  • Submerged installation eliminates suction-height limitations and priming requirements
  • Compact vertical design fits inside well casing with minimal above-ground space
  • Direct lifting of clean water from deep underground sources
Performance Characteristics

Rated operating point is 32 m³/h at 112 m head. Actual output depends on total system head, including dynamic water level, delivery elevation, outlet pressure, and friction losses in the rising pipe and external pipeline.

Applications
  • Deep-well water extraction
  • Agricultural irrigation
  • Rural water supply systems
  • Storage-tank filling
  • Livestock water supply
  • Industrial clean-water transfer
  • Pipeline pressure boosting
Fluid Compatibility

Designed exclusively for clean water. Not suitable for sewage, sludge, long fibres, or liquids containing large solid particles. Water containing excessive sand or corrosive chemicals should be evaluated before pump selection.

Well Requirements
  • Minimum applicable diameter: 200 mm
  • Sufficient water supply to support continuous 32 m³/h flow
  • Confirm actual casing diameter, well straightness, static and dynamic water levels before installation
Installation Guidelines

Install vertically below the lowest expected dynamic water level and above sediment at the well bottom. The rising pipe should match the 3-inch outlet and be rated for expected operating pressure.

Motor Protection

The 18.5 kW motor requires connection to a suitable control panel with overload, phase-loss, abnormal-voltage, and dry-running protection. Confirm required voltage, frequency, cable size, and starting method according to installation site specifications.

Frequently Asked Questions
What do the main specifications mean?
The pump delivers a rated flow of 32 m³/h at a rated head of 112 m. It uses an 18.5 kW (approximately 25 HP) motor and has a 3-inch discharge outlet.
Does a 112 m head mean the pump must be installed 112 m deep?
No. Pump head represents the total pressure required to lift and deliver water, including dynamic water level, elevation, pipe losses, and required outlet pressure.
Can the pump be installed in a 200 mm well?
The 200QJ series is intended for minimum applicable well diameter of 200 mm. Actual internal casing diameter and installation clearance should be verified before ordering.
Can this pump handle sewage?
No. It is designed exclusively for clean water and should not be used for sewage, sludge, fibres, or large solid particles.
Can the pump operate without water?
No. Dry running may cause inadequate motor cooling and pump damage. A low-water-level or dry-running protection device is strongly recommended.
What information is needed for a quotation?
Provide well diameter, well depth, static and dynamic water levels, required flow, discharge height, pipe length, water quality, power supply, and cable length.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2008

  • Total Annual:

    10000000-50000000

  • Employee Number:

    50~100

  • Ecer Certification:

    Verified Supplier

Shanghai Weihu Pump Co., Ltd. A large-scale modernized mainstay water supply and drainage facility enterprise in China that integrates research, development, trail-manufacture, testing, production and management. Weihu Pump is the first grade enterprise of Chinese Ministry of Agriculture. Its... Shanghai Weihu Pump Co., Ltd. A large-scale modernized mainstay water supply and drainage facility enterprise in China that integrates research, development, trail-manufacture, testing, production and management. Weihu Pump is the first grade enterprise of Chinese Ministry of Agriculture. Its...

+ Read More

Get in touch with us

  • Reach Us
  • Shanghai Weihu Pump Co., Ltd.
  • Building 6 and building 10, No. 559 Gangye Road, Xiaokunshan Town, Songjiang District, Shanghai City, China
  • https://www.wel-pump.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement