SHENZHEN WEIMING PHOTOELECTRIC CO.,LTD.
| Payment Terms | T/T |
| Packaging Details | wooden case |
| Delivery Time | 5-8 work days |
| Max Tube Voltage | 90kV (optional) |
| Max Load | 15kg |
| Place of Origin | China |
| Model Number | X-6000 |
| Certification | CE,FDA,ISO9001 |
| Brand Name | WELLMAN |
View Detail Information
Explore similar products
Industrial X-ray Inspection System 130mm*130mm FPD Effective Area PCB
3 Axes Coordination and Practical Multi-Functional Automatic X-ray Inspection
Easy to Operate and Tiltable Offline X-ray Inspection System with 420*420mm
x ray inspection equipment with 90kv Hamamatsu Tube and 17'' Tiltable digital
Product Specification
| Payment Terms | T/T | Packaging Details | wooden case |
| Delivery Time | 5-8 work days | Max Tube Voltage | 90kV (optional) |
| Max Load | 15kg | Place of Origin | China |
| Model Number | X-6000 | Certification | CE,FDA,ISO9001 |
| Brand Name | WELLMAN |
| Type | Closed, microfocus |
|---|---|
| Max Tube Voltage | 90kV (optional) |
| Max Tube Current | 200μA |
| Focal Spot Size | 5μm |
| Function | Auto preheat (about 15 minutes) |
| Effective Area | 130mm×130mm |
|---|---|
| Pixel Size | 85μm |
| Resolution | 1536×1536 |
| Frame Rate | 20fps |
| Size | 420mm×420mm |
|---|---|
| Detectable Area | 400mm×400mm |
| Max Load | 15kg |
| Magnification | Geometry 150X | System 1500X |
|---|---|
| Inspection Speed | Max 3.0s/point |
| Dimensions | 1100mm (L) × 1000mm (W) × 1600mm (H) |
| Weight | 1000kg |
| Power Supply | AC110-220V 50/60HZ |
| Max Power | 1300W |
| Industrial PC | Intel I5 CPU, 8G RAM, 240GB SSD |
| Displayer | 24" HDMI LCD |
| Radiation Leakage | No leakage |
|---|---|
| Lead Glass Observation Window | Transparent lead glass window shields radiation to observe internal status |
| Window and Back Door Safety Interlock | X-ray tube powers off immediately when window or door opens |
| Electromagnetic Safety Switch | Locks when X-ray is on, preventing window opening |
| Emergency Stop | Located next to operation position for immediate power cutoff |
| Tube Protection | Software prevents leaving without closing X-ray tube |
| Operation | Keyboard and mouse can finish all operations |
|---|---|
| X-ray tube control | Using mouse to click the X button can turn on or off the X-ray |
| Status bar | Indicates the interlock status, pre-heat status, and X-ray status by flashing alternately red and green |
| Image effect adjustment | The brightness, contrast and gain of the image can be adjusted freely to achieve a satisfactory result |
| Product list | Users can save the inspection parameters and can directly call the parameters |
| Navigation window | The table will move to the place you click and display on the screen |
| Motion axis status | Display real-time coordinates |
| Inspection result | The measurement results (voids rate, distance, area, etc., set by users) display in order |
| Speed control | slow, normal and fast |
| Automatic calculation | Click on two points to determine a rectangle |
|---|---|
| Parameters adjustment | Users can adjust the grayscale threshold, pixel, contrast, size filtering and other parameters |
| Add voids manually | Users can draw a polygon or a free figure and calculate it as a void into the void rate |
| Save parameters | Users can save parameters and can directly call the parameters |
| Distance | Click the A and B points to set as the baseline, then click the C point to measure the vertical distance from the C point to the baseline |
|---|---|
| Distance rate | It is mostly used to measure the soldering rate of the through-hole |
| Angle | Click the A and B points to set as the baseline, then click the C point to measure the angle between the BA and BC rays |
| Radius | Click three points to determine a circle and measure the circumference, area and radius |
| Perimeter | It is mostly used to measure square components, click two points to determine a square, measure the length, width and area |
| Manual setting | Users can set any positions on the table as inspection points, the software will automatically inspect and save the picture |
|---|---|
| Array | For the regular inspection points, users only need to set two of the inspection points and the number of rows and columns, the software will automatically inspect each point and save pictures |
| Automatic identification | For inspection points with obvious features, the software automatically identifies the positions, takes measurements, and saves the image |
Company Details
Business Type:
Manufacturer
Year Established:
2018
Ecer Certification：
Verified Supplier
Wellman, a professional X-Ray inspection manufacturer which is integrates R&D, production and sales that is set up in China by Hong Kong-invested enterprises. Wellman has many years of professional R&D team at home and abroad, has been committed to the global intelligent manufacturing ... Wellman, a professional X-Ray inspection manufacturer which is integrates R&D, production and sales that is set up in China by Hong Kong-invested enterprises. Wellman has many years of professional R&D team at home and abroad, has been committed to the global intelligent manufacturing ...
Get in touch with us
Leave a Message, we will call you back quickly!