Small 100W Ultrasonic Jewelry Cleaning Machine 3.2L Capacity For Wedding Ring

Product Specification

100W Ultrasonic Jewelry Cleaner With 3.2L Capacity For Wedding Ring

What is an ultrasonic cleaner and how does it work? 

An ultrasonic cleaner is a small machine that works by emitting high frequency sound waves.(Usually over 20KHz) What this does is to create bubbles and ultrasonic vibrations in the water (also known as a cavitation process) which effectively removes dirt and grime clinging to your jewelry.

You might be wondering:

How is this more effective than other jewelry cleaning options, such as using a small brush and soapy water? When you clean with a brush, there are limitations to where the brush can get to. Some jewelry items may have tiny crevices and cavities which make it difficult for a brush or other cleaning solution to get to. When you place these items into the cleaning solution and begin the ultrasonic process, the bubbles created by the disturbance in the water work removes the dirt and contamination on the jewelry items. Because an ultrasonic cleaner works via waves and movement, the contamination in all the hard to reach places will be easily accessed and removed.

The entire process generally takes just a few minutes and your jewelry comes out of the solvent clean and sparkling. So not only are you saving time but you receive an effective and complete cleaning outcome.

Specification Of Z-S02:

Customer's Cleaning Feedback:

How to use an ultrasonic jewelry cleaner?

Using an ultrasonic jewelry cleaner is easy and time-saving. All you have to do is follow a few steps, which are the same for most cleaners on the market.

• Most ultrasonic jewelry cleaners work with a cleaning solution that is used to fill the tank of the machine, as per manufacturer’s instructions. However, some models on the market work with tap water. This, of course, depends on the model so check the instructions of your particular model carefully prior to use.

• Once the tank is filled, place the jewelry items into the cleaning solvent and turn the machine on. If you are putting in multiple items, just take care that the jewelry does not damage each other.

• Ensure that the water is hot to get the most effective clean. Many people skip this step, using cold water instead, but this does not give as effective a clean as when using hot water. Some ultrasonic jewelry cleaner models have a built-in heater feature which keeps the water at the right temperature for the best clean. However, do NOT use boiling water as this can damage your jewelry.

• As the cycle kicks into motion, you will notice the ultrasonic vibrations moving through the liquid, whipping up agitated bubbles. The heat and pressure this creates start to remove the dirt build-up. You will be able to adjust the heat and intensity of the cleaner as required.

• After the cleaning cycle is complete, it is best to leave your jewelry items for several minutes in the water for the dirt to separate from the items.

• Finally, take your items out, give them a rinse in clean water to remove the cleaning solution and then use a soft brush to remove any clinging dirt particles from the jewelry items. This does not need to take long, as the dirt is already loosened. Just ensure that you brush the difficult areas such as the claws and crevices of your items.

• Give the items one final rinse. You can do this manually or in the ultrasonic cleaner. Just use clean water and once complete, dry the items using a soft cloth.