30L SUS304 Tank Laboratory Ultrasonic Cleaner 500 Watt Ultrasonic Power

Product Specification

30L SUS304 Tank Laboratory Ultrasonic Cleaner 500Watt Ultrasonic Power

Why You Need Whale Cleen Sonic Lab Ultrasonic Bath?

The Whale Cleen LanJ-10 Ultrasonic Cleaner is designed for performance, control, durability, and reliability for a variety of applications. The LanJ-10 is powerful enough to remove heavy oils, buffing compounds, and proteins, consistent enough to manage difficult laboratory cleaning, while also safe enough for delicate components or fine jewelry. Ultrasonic sound waves move through a cleaning solution, creating an effect called cavitation, which is the rapid formation and collapse of microscopic bubbles. The 40kHz transducers provide increased cleaning power with built-in sweep frequency for uniform cleaning throughout the bath. Features digital timer and 30L capacity with easy-empty rim.

All of our equipment is fully tested to perform at factory specifications before being shipped.

Specification:

More Special design please contact whale Cleen sonic sales man for more information.

Customer's Feedback:

Advantage Of Ultrasonic Cleaning:

1. It can clean entirely for your all laboratory instrument.

2. It can improve accuracy of your experiments.

3. It save your time and labor.

4. It can be used for other application like dissolution,extraction and etc.

5. It is enviromentally cleaning method and you don't need any harmful solvent.

Discount Policy:

If you are the first customer of Whale Cleen sonic, you will get US$50 coupon when your purcahse amount over US$500.More discount information,please contact our sales man for more detail.

FAQ:

1. How Can I Enhance the Cleaning Process?

It depends on the item you intend to clean and the type of ultrasonic cleaner you are using. However, for optimal cleaning, set a suitable temperature and timing for the cleaning process. The size of the ultrasonic cleaning machine and the cleaning solution used also determines how well it cleans the item.

2. Which Cleaning Solutions Should I Not Add to the Water?

Solutions that have low flash points should not be added. The cavitation process works by releasing energy, which is converted to heat and then to kinetic energy. As a result, high-temperature gradients are generated in the solutions. Using flammables, bleach, acids, or other such agents produces even higher temperature gradients that can be extremely risky. Here is a list of effective cleaning solutions:

· Alkaline Solutions: With a pH of 10 or higher, they are great for cleaning stainless steel, metals, zinc, tin, copper, and cast iron. Alkaline solutions also work well when cleaning ceramics, glass, and plastic materials.

· Acidic solutions: they have a pH of 5 or lower hence, more aggressive than alkaline solutions. As such, acidic solutions are used for cleaning specific materials, e.g., removing oxides from metals as long as the solution contains inhibitors that protect the base material.

· De-ionized water: it is great for cleaning all kinds of material-metals, plastics, rubber, glass, and fabrics.

· High Caustic solutions: these are special alkaline solutions used for removing waxes, heavy grease, and oils from steel, cast iron, and stainless steel.

How To Start Ultrasonic Cleaning?

Select a location that supports an orderly flow of work. Proximity to a sanitary drain is ideal for disposing of spent cleaning solution, but first check with local authorities. While elma tec clean A4 cleaning solution is biodegradable it’s wise to be sure it’s OK to pour down the drain.

Following is a brief description of the fuel injector cleaning process:

• Fill the tank half full of water and add the correct amount of cleaning solution concentrate. As an example, for the ¾ gallon tank add approximately 2/3 cup; for the 1.6 gallon tank 1-1/4 cup. Continue adding water to the tank fill line.

• Degas the solution by operating the ultrasonic cleaner for about 20 minutes. This drives off cavitation inhibiting entrained air and also mixes your solution. The degassing step must be performed every time you prepare fresh cleaning solution.

When you are ready to clean:

• Carefully position the fuel injectors in the basket with nozzle holes facing up. It’s important that the solution accesses the interior of the injectors.

• Activate the ultrasound, lower the basket into the solution and place the lid on the tank to reduce evaporation and noise. Set the timer for 15 minutes. Cleaning time depends on condition and can be adjusted either way. Depending on fuel injector configuration it may be beneficial to remove the basket and reposition the injectors. (Note the solution will get hot, do not reach into it, and consider wearing protective gloves.)

• When satisfied rinse the injectors in fresh water and blow dry with an air hose.

Bath Maintenance

Contaminants that float to the surface should be skimmed off and set aside. When the cleaning solution loses its effectiveness it must be replaced. Drain the tank and dispose of the solution and collected skimmings, according to local regulations. Follow the cleaner’s instruction manual on cleaning the tank then fill it with fresh solution.

Discount Policy:

If you are the first customer of Whale Cleen sonic, you will get US$50 coupon when your purcahse amount over US$500.More discount information,please contact our sales man for more detail.