SUS304 Ultrasonic Fuel Injector Cleaner 30L 500Watt For Auto Parts

Product Specification

30L 500Watt Industrial Ultrasonic Cleaning Machine For Fuel Injector With Heater

How does ultrasonic fuel injector cleaner work?

The ripple effect is caused by the ultrasonic sound waves.The ultrasonic cleaning system sends high frequency sound waves through a cleaning solution. This frequency leaves micron sized super heated bubbles in the sound waves wake. When these bubbles collapse against the fuel injector components the heat and energy of their implosions together with the fuel injector cleaning solution work like millions of little scrub brushes. This scrubbing brush action remove dirt and oxidation from the internal surface of the contaminated fuel injector parts.

Specification:

Specification Of Related Model:

If this model is not suitable for you, please check other in below chart.

Feature of Ultrasonic Cleaner

• Special protection circuit, intelligent control system
• Small and lightweight, easy to carry and easy to operate
• Pervasiveness, all object surface can be cleaned in the liquid
• Nondestructive cleaning, ultrasonic cleaning won't make the object cause any damage
• Remove dirt, dust, grease from the tiniest of places using ultrasonic technology
• Suitable for cleaning jewelry, glasses, circuit boards, ornament, headwear, brooch, pen, CD, toothbrush, false teeth, milk bottle, fruit, clock, exact instruments etc.

Cleaning Effect:

Why Ultrsonic Cleaning Fuel Injectors Works Best

Fuel injectors can be costly to replace, are delicate and precisely manufactured. Carbon deposits and other contaminants that attach to injectors are most safely removed by cavitation action in an ultrasonic cleaner. This is the powerful but safe implosion of millions of minute bubbles in a biodegradable ultrasonic cleaning solution. The bubbles are produced by the cleaner’s generator powered transducers vibrating at ultrasonic frequencies such as 37 and 40 kHz. The bubbles are so small that they reach all surfaces of the injectors, even the interior of the nozzles, to loosen and carry away all contaminants.

This cleaning action will not damage other injector components.

How To Start Ultrasonic Cleaning?

Select a location that supports an orderly flow of work. Proximity to a sanitary drain is ideal for disposing of spent cleaning solution, but first check with local authorities. While elma tec clean A4 cleaning solution is biodegradable it’s wise to be sure it’s OK to pour down the drain.

Following is a brief description of the fuel injector cleaning process:

• Fill the tank half full of water and add the correct amount of cleaning solution concentrate. As an example, for the ¾ gallon tank add approximately 2/3 cup; for the 1.6 gallon tank 1-1/4 cup. Continue adding water to the tank fill line.

• Degas the solution by operating the ultrasonic cleaner for about 20 minutes. This drives off cavitation inhibiting entrained air and also mixes your solution. The degassing step must be performed every time you prepare fresh cleaning solution.

When you are ready to clean:

• Carefully position the fuel injectors in the basket with nozzle holes facing up. It’s important that the solution accesses the interior of the injectors.

• Activate the ultrasound, lower the basket into the solution and place the lid on the tank to reduce evaporation and noise. Set the timer for 15 minutes. Cleaning time depends on condition and can be adjusted either way. Depending on fuel injector configuration it may be beneficial to remove the basket and reposition the injectors. (Note the solution will get hot, do not reach into it, and consider wearing protective gloves.)

• When satisfied rinse the injectors in fresh water and blow dry with an air hose.