15KW~75KW 3 Pole AC Motor Starter Cabinet On Line Soft Starting IP30 IP40

Product Overview

The Online Motor Soft Starter Cabinet is a high-performance control solution designed to bridge the gap between simple across-the-line starters and complex Variable Frequency Drives (VFDs). Engineered for three-phase asynchronous motors ranging from 15kW to 75kW, this starter reduces the voltage during the initial startup phase, allowing the motor to accelerate smoothly to full speed.

Unlike traditional Star-Delta starters, the Online Soft Starter provides a stepless ramp-up, which eliminates the damaging "torque spikes" and "current surges" that cause mechanical wear on belts, gears, and pump impellers. Equipped with an integrated bypass contactor, the system automatically switches to a direct connection once the motor reaches full speed, maximizing efficiency and minimizing heat dissipation within the cabinet.

Key Technical Advantages

• Voltage Ramp & Current Limit Starting: Offers multiple starting modes, including voltage ramp and constant current limiting, allowing you to tailor the start-up profile to specific loads like high-inertia fans or heavy-duty crushers.

• Built-in Bypass Contactor: Features an internal bypass that engages after the start-up cycle is complete. This reduces the thermal load on the thyristors (SCRs), significantly extending the service life of the electronics.

• Advanced Motor Protection Suite: Integrated protection against overcurrent, phase loss, phase imbalance, overheating, and underload (dry-run protection). No external thermal relays are required.

• Reduced Mechanical Maintenance: By providing a linear torque curve during startup, the soft starter prevents "water hammer" in plumbing systems and reduces belt slippage in conveyor systems.

• User-Friendly Digital Interface: Equipped with a backlit LCD or LED display for real-time monitoring of starting current, operating voltage, and fault codes.

Technical Specifications

Primary Application Scenarios

1. Water Pumps & Irrigation: Eliminates water hammer in long pipelines and reduces pressure surges during pump activation.

2. HVAC & Large Fans: Smoothly starts high-inertia centrifugal fans, preventing belt snap and reducing the impact on the building's electrical grid.

3. Conveyor Systems: Provides a jerk-free start for loaded conveyor belts, preventing material spillage and mechanical stress on the drive chain.

4. Air Compressors: Reduces the peak current demand during the start-up cycle of screw or piston compressors.

Why Source Our Soft Starter Cabinets?

• Turnkey Factory Assembly: Every cabinet is pre-wired, tested, and commissioned at our Yueqing facility. You only need to connect the power supply and motor leads.

• Precision Thyristor Selection: We use high-grade SCR modules with superior peak-voltage resistance to ensure reliability even in areas with unstable power quality.

• Space-Saving Vertical Design: Our cabinets feature a compact footprint with high-quality cold-rolled steel, finished with industrial-grade powder coating (RAL 7035).

• Easy Parameter Setup: The control logic is designed for "out-of-the-box" operation. Most applications only require adjusting the Start Time and Initial Torque dials.

FAQ

Q: Does this cabinet require an external contactor?

A: No. This is an Online model with an Internal Bypass. Once the motor reaches full speed, the internal bypass contactor takes over, saving you money on external components and cooling fans.

Q: Can this be used to control the motor's speed during operation?

A: No. A soft starter is only for starting and stopping. If you need to vary the motor speed during the work cycle, you will require a Variable Frequency Drive (VFD).

Q: What is the maximum number of starts per hour?

A: Depending on the load, we recommend no more than 10–12 starts per hour to allow for proper cooling of the SCR modules.

Product Images

Recommend Products

Company Profile

Certifications

Customer Photos

Product packaging

FAQ Images