STM32F407VGT6 168MHz Cortex-M4 MCU 1MB Flash 192KB RAM 17 Timers LQFP-100 -40°C

Product Specification

STM32F407VGT6 168MHz Cortex-M4 MCU 1MB Flash 192KB RAM 17 Timers LQFP-100 -40anddeg;C to +85anddeg;C

andnbsp;

Features

andbull; Ultra-low-power with FlexPowerControl

andndash; 1.71 V to 3.6 V power supply

andndash;-40 anddeg;C to 85/105/125 anddeg;C temperature range

andndash; 200 nA in VBAT mode: supply for RTC and 32x32-bit backup registers

andndash; 8 nA Shutdown mode (5 wakeup pins)

andndash; 28 nA Standby mode (5 wakeup pins)

andndash; 280 nA Standby mode with RTC

andndash; 1.0 andmicro;A Stop 2 mode, 1.28 andmicro;A with RTC

andndash; 84 andmicro;A/MHz run mode

andndash; Batch acquisition mode (BAM)

andndash; 4 andmicro;s wakeup from Stop mode

andndash; Brown out reset (BOR)

andndash; Interconnect matrix

andbull; Core: Armandreg; 32-bit Cortexandreg;-M4 CPU with FPU, Adaptive real-time accelerator (ART Acceleratorandtrade;) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions

andbull; Performance benchmark

andndash; 1.25 DMIPS/MHz (Drystone 2.1)

andndash; 273.55 CoreMarkandreg; (3.42 CoreMark/MHz @ 80 MHz)

andbull; Energy benchmark

andndash; 176.7 ULPBenchandreg; score

andbull; Clock Sources

andndash; 4 to 48 MHz crystal oscillator

andndash; 32 kHz crystal oscillator for RTC (LSE)

andndash; Internal 16 MHz factory-trimmed RC (andplusmn;1%)

andndash; Internal low-power 32 kHz RC (andplusmn;5%)

andndash; Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than andplusmn;0.25 % accuracy)

andndash; Internal 48 MHz with clock recovery

andndash; 2 PLLs for system clock, audio, ADC

andbull; Up to 83 fast I/Os, most 5 V-tolerant WLCSP49

andbull; RTC with HW calendar, alarms and calibration

andbull; Up to 21 capacitive sensing channels: support touchkey, linear and rotary touch sensors

andbull; 11x timers: 1x 16-bit advanced motor-control, 1x 32-bit and 2x 16-bit general purpose, 2x 16 bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer

andbull; Memories

andndash; Up to 256 KB single bank Flash, proprietary code readout protection

andndash; 64 KB of SRAM including 16 KB with hardware parity check

andndash; Quad SPI memory interface

andbull; Rich analog peripherals (independent supply)

andndash; 1x 12-bit ADC 5 Msps, up to 16-bit with hardware oversampling, 200 andmicro;A/Msps

andndash; 2x 12-bit DAC output channels, low-power sample and hold

andndash; 1x operational amplifier with built-in PGA

andndash; 2x ultra-low-power comparators

andbull; 16x communication interfaces

andndash; 1x SAI (serial audio interface)

andndash; 3x I2C FM+(1 Mbit/s), SMBus/PMBus

andndash; 4x USARTs (ISO 7816, LIN, IrDA, modem)

andndash; 1x LPUART (Stop 2 wake-up)

andndash; 3x SPIs (and 1x Quad SPI)

andndash; CAN (2.0B Active) and SDMMC interface

andndash; SWPMI single wire protocol master I/F

andndash; IRTIM (Infrared interface)

andbull; 14-channel DMA controller

andbull; True random number generator

andbull; CRC calculation unit, 96-bit unique ID

andnbsp;

Description

The STM32F405xx and STM32F407xx family is based on the high-performance Armandreg; Cortexandreg;-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortexandreg;-M4 core features a floating-point unit (FPU) single precision which supports all Arm single precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32F405xx and STM32F407xx family incorporates high-speed embedded memories (flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.

All devices offer three 12-bit ADCs, two DACs, a low-power RTC, 12 general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG). They also feature standard and advanced communication interfaces.

andbull; Up to three I2Cs

andbull; Three SPIs, two I2Ss full duplex. To achieve audio class accuracy, the I2S peripherals can be clocked via a dedicated internal audio PLL or via an external clock to allow synchronization

andbull; Four USARTs plus two UARTs

andbull; A USB OTG full speed and a USB OTG high speed with full-speed capability (with the ULPI)

andbull; Two CANs

andbull; An SDIO/MMC interface

andbull; Ethernet and the camera interface available on STM32F407xx devices only

New advanced peripherals include an SDIO, an enhanced flexible static memory control (FSMC) interface (for devices offered in packages of 100 pins and more), a camera interface for CMOS sensors. Refer to Table 2: STM32F405xx and STM32F407xx: features and peripheral counts for the list of peripherals available on each part number.

The STM32F405xx and STM32F407xx family operates in the andndash;40 to +105 anddeg;C temperature range from a 1.8 to 3.6 V power supply. The supply voltage can drop to 1.7 V when the device operates in the 0 to 70 anddeg;C temperature range using an external power supply supervisor: refer to Section : Internal reset OFF. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F405xx and STM32F407xx family offers devices in various packages ranging from 64 pins to 176 pins. The set of included peripherals changes with the device chosen.

These features make the STM32F405xx and STM32F407xx microcontroller family suitable for a wide range of applications:

andbull; Motor drive and application control

andbull; Medical equipment

andbull; Industrial applications: PLC, inverters, circuit breakers

andbull; Printers, and scanners

andbull; Alarm systems, video intercom, and HVAC

andbull; Home audio appliances

andnbsp;

INFORMATION

andnbsp;

Drawing

Our advantage :

• High quality products --- our offers are 100% new and original, ROHS
• Competitive price --- good Purchase channels with good price.
• Professional service --- strict quality testing before the shipment, and perfect after-sales service after the purchase.
• Adequate inventory --- With the support of our strong Purchasing team,
• Fast delivery --- we will ship the goods within 1-3 working days after the payment confirmed.

andnbsp;

be sure to meet your need for all kinds of components. ^_^


Product List
Supply a Series of Electronic Components, full range of semiconductors, active andamp; passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,


The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer andamp; Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal andamp; Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)

Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc