Ruixin Energy Equipmnet
| Payment Terms | T/T, Western Union |
| Supply Ability | 1 set 3 weeks |
| Delivery Time | 3-4 weeks |
| Packaging Details | Wooden Box |
| Name | GO Devil Flat Bottomed Wireline Fishing Tool |
| Size | 1.5inch 1.875inch 2.125inch 2.5inch |
| Material | Alloy Steel |
| Use | Wireline &Slickline |
| Fish Neck | 1.187inch 1.375inch 1.75inch 2.313inch |
| Length | 2ft 3ft 5ft |
| Service | Standard &H2S |
| Brand Name | Ruixin |
| Model Number | 1.5inch 1.875inch 2.125inch 2.5inch |
| Certification | API Q1 |
| Place of Origin | China Baoji |
View Detail Information
Explore similar products
Slider fishing spear Wireline Fishing Tool
API Q1 Approved Side wall Cutter Wireline Fishing Tool
Nickel Alloy Wireline Grab Slickline Fishing Tools
3 Inch Wireline Wire Finder Wireline Fishing Tool Nickel Alloy
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 1 set 3 weeks |
| Delivery Time | 3-4 weeks | Packaging Details | Wooden Box |
| Name | GO Devil Flat Bottomed Wireline Fishing Tool | Size | 1.5inch 1.875inch 2.125inch 2.5inch |
| Material | Alloy Steel | Use | Wireline &Slickline |
| Fish Neck | 1.187inch 1.375inch 1.75inch 2.313inch | Length | 2ft 3ft 5ft |
| Service | Standard &H2S | Brand Name | Ruixin |
| Model Number | 1.5inch 1.875inch 2.125inch 2.5inch | Certification | API Q1 |
| Place of Origin | China Baoji | ||
| High Light | Go Devil Slickline Fishing Tool ，Flat Bottomed Wireline Fishing Tool ，Alloy Steel Wireline Overshot | ||
GO Devil Flat Bottomed Wireline Fishing Tool
I. Overview:
GO Devil Flat Bottomed are used to cut stuck tool string wires.
Flat bottom wire cutters consist of a solid rod with grooves and guide surfaces. It is run into the well in the conventional manner, where the wireline tool is heavily buried by sand, debris, or wire, or without a single cut. Flat-bottomed wire cutters provide a solid cutting surface for sloping-bottomed wire cutters or wire scissors.
The steel wire cutter has a positioning groove for installing the slip centralizer, which can be used in large-diameter oil pipes after the slip centralizer is installed.
II, the commonly used technical parameters:
| Size | Fishing neck | length | Applicable steel wire specification |
| 1.5＂ | 1.375＂ | 2ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 1.5＂ | 1.375＂ | 3ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 1.5＂ | 1.375＂ | 5ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 1.875＂ | 1.75＂ | 2ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 1.875＂ | 1.75＂ | 3ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 1.875＂ | 1.75＂ | 5ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 2.125＂ | 1.75＂ | 2ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 2.125＂ | 1.75＂ | 3ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 2.125＂ | 1.75＂ | 5ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 2.5＂ | 2.313＂ | 2ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 2.5＂ | 2.313＂ | 3ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
| 2.5＂ | 2.313＂ | 5ft | 0.092＂～0.108＂/7/32＂～3/16＂ |
III. Structural characteristics and use:
The GO Devil Flat Bottomed is composed of a slotted flat bottom solid rod and a baffle. The baffle is connected with the slotted solid rod by screws. When using, remove the baffle, insert the wire into the slot, and then install the baffle. The steel wire cutter goes into the well along the steel wire and assists the inclined bottom steel wire cutter to cut the steel wire. The wire cutter and tool string are then fished out with a catcher.
IV, matters needing attention:
After using the flat bottom wire cutter, timely and careful maintenance will prolong the service life of the tool.
Welcome to contact us at any time.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2012
Total Annual:
200-500
Employee Number:
One~Fifty
Ecer Certification：
Verified Supplier
Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-... Ruixin Energy Equipment Ruixin Energy Equipment is slickline manufacturer focused on wireline PCE , wireline tools, coiled tubing tools, etc.. Our factory and technology R & D center is Located in the national technology enterprise incubation industry park - 401B, High-...
Get in touch with us
Leave a Message, we will call you back quickly!