Xi'an Hoan Microwave Co., Ltd.
| Payment Terms | L/C,D/A,D/P,T/T, |
| Profile Type | Low-Profile / Slim Form Factor |
| Supply Ability | |
| Damping Type | Friction + Elastic Hysteresis |
| Application | UAV, Robotics, Precision Instruments, Railway |
| Vibration Attenuation | Up to 90% (10-2000 Hz) |
| Operating Temperature | -70°C to +300°C |
| Packaging Details | |
| Mounting Orientation | Multi-Orientation (Base, Bar, Custom) |
| Model | JGX-0958D-149A |
| Material | Stainless Steel AISI 304 / 316 |
| Delivery Time | 3-5 working days for stock, 15-20 days for production |
| Coil Configuration | Multi-Helical Wire Rope |
| Model Number | JGX-0958D-149A |
| Place of Origin | Shaanxi, China |
| Brand Name | Hoan |
| Certification | ISO 9001:2015 |
View Detail Information
Explore similar products
Helical Wire Rope Isolator Manufacturers Generating Set Trailer Compressor
Equipment Wire Rope Vibration Isolator Springs
Ceiling Fan Wire Rope Vibration Isolator Damper
Lightweight Vibration Isolation Solutions For Industrial Applications Weight KG
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T, | Profile Type | Low-Profile / Slim Form Factor |
| Supply Ability | Damping Type | Friction + Elastic Hysteresis | |
| Application | UAV, Robotics, Precision Instruments, Railway | Vibration Attenuation | Up to 90% (10-2000 Hz) |
| Operating Temperature | -70°C to +300°C | Packaging Details | |
| Mounting Orientation | Multi-Orientation (Base, Bar, Custom) | Model | JGX-0958D-149A |
| Material | Stainless Steel AISI 304 / 316 | Delivery Time | 3-5 working days for stock, 15-20 days for production |
| Coil Configuration | Multi-Helical Wire Rope | Model Number | JGX-0958D-149A |
| Place of Origin | Shaanxi, China | Brand Name | Hoan |
| Certification | ISO 9001:2015 | ||
| High Light | Low-Profile Engineering ，Universal Mounting Flexibility ，Premium-Grade Vibration Absorption | ||
The JGX-0958D-149A low-profile configuration addresses a critical challenge in contemporary equipment engineering: delivering full-spectrum vibration isolation within aggressively constrained spatial envelopes. By rethinking the coil geometry to minimize the Z-axis profile while preserving the multi-helical damping core, this variant achieves the same attenuation performance as taller isolators in a package optimized for compact machinery bays, UAV payload compartments, robotics platforms, and precision instrumentation chassis where vertical clearance is measured in millimeters rather than centimeters.
The JGX-0958D-149A supports four validated mounting orientations, each with documented load-deflection characteristics available in the product datasheet:
| Model | JGX-0958D-149A |
| Profile Classification | Low-Profile / Slim Form Factor |
| Wire Rope Core | AISI 316L Stainless Steel, Cold-Drawn, Electropolished |
| Wire Rope Diameter | 9.5 mm |
| Coil Count | 8 Coils, Multi-Helical Winding |
| Clamping Bar | 6061-T6 Aluminum Alloy, Hard Anodized (Type III) |
| Mounting Interface | M10 Clearance Holes, Symmetric Pattern |
| Fastener Torque | 45 N·m (M10, Grade 8.8) |
| Installation Orientation | Compression / Inverted / Shear / 45° Roll |
| Damping Mechanism | Coulomb Friction + Elastic Hysteresis |
| Frequency Range | 10–2000 Hz Effective Attenuation |
| Operating Temperature | -70°C to +300°C |
| Static Load Range | 5–150 kg (Compression, per Mount) |
| Transmissibility Deviation | ≤5% vs Standard-Profile Equivalent |
| Surface Treatment | Electropolished Wire + Hard Anodized Bars |
| Certification | ISO 9001:2015, ISO 10846 |
No. The JGX-0958D-149A uses the same 9.5 mm wire rope diameter and 8-coil configuration as the standard-profile series. Load capacity is determined by wire diameter and coil count—not by overall isolator height. The low-profile designation refers to the optimized Z-axis envelope achieved through coil pitch geometry, not material reduction.
Measure the dominant vibration vector on your equipment. If the excitation is primarily vertical (e.g., rotating machinery), compression mounting is optimal. For horizontal excitation (e.g., reciprocating compressors), shear mounting provides better isolation. Our engineering team provides free application review with vibration analysis data to recommend the optimal configuration for each mounting point.
Yes. STEP, IGES, and native SolidWorks part files for the JGX-0958D-149A are available upon request. Each model includes the full mounting envelope, bolt clearance zones, and recommended clearance for coil deflection under maximum rated load. Contact us with your preferred CAD format.
Every JGX-0958D-149A undergoes individual load-deflection characterization before shipment, with test data archived by serial number for full traceability. Manufactured under ISO 9001:2015 quality management and tested to ISO 10846 acoustic and vibration standards. Request a quote today for volume pricing, complimentary CAD model access, and a complimentary application review by our vibration engineering team.
Company Details
Business Type:
Manufacturer
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
Xi'an Hoan Microwave Co., Ltd. was established in 2005. The company is located in the High-tech Zone of Xi'an. The company covers an area of 800 square meters, including 500 square meters of production area and 300 square meters of office area. It is a professional enterprise specializing in t... Xi'an Hoan Microwave Co., Ltd. was established in 2005. The company is located in the High-tech Zone of Xi'an. The company covers an area of 800 square meters, including 500 square meters of production area and 300 square meters of office area. It is a professional enterprise specializing in t...
Get in touch with us
Leave a Message, we will call you back quickly!