750-1010 / 1220 / 1250 Mm Width SPCC, SPCD, SPCE Cold Rolled Steel Sheet

Product Specification

750-1010 / 1220 / 1250 Mm Width SPCC, SPCD, SPCE Cold Rolled Steel Sheet

1．Product Overview

Cold rolled steel sheet is suitable for downstream blanking, bending, forming, and sheet fabrication where stable thickness, flat surface condition, and controlled width are required. This product range covers general commercial grades as well as drawing-related grades, so the material can be matched to different forming routes and end-use requirements.

The available specification range is 0.15–3.0mm in thickness with widths of 750–1010mm, 1220mm, and 1250mm. The material can be supplied in coil form and processed to required sheet length according to the downstream route.

2．Technical Solution

The product is supplied under JIS, EN, DIN, GB, and SAE grade systems, which allows matching to different processing standards and market requirements. Grade selection is the main basis for distinguishing general commercial use from forming and drawing-related use.

Soft commercial quality is generally used for normal fabrication and general forming. Full hard quality is used where higher rigidity or lower ductility is required. Deep drawing quality is selected when the part requires better drawing performance. In practical processing, thickness, width, coil build, and grade should be confirmed together with the final forming route. This page uses the document-based coil build of 508mm or 610mm coil ID and max. 11 MT coil weight.

3．Specifications

4．Application

• This material is suitable for cold rolled sheet processing where dimensional control and stable forming behavior are required.
• It can be used for blanking, bending, stamping, forming, and general fabricated sheet parts.
• According to grade and quality selection, it is also suitable for drawing-related applications where better formability is needed.

5．Processing

• The material can be supplied in coil form and cut to required sheet length according to processing requirement.
• It is suitable for decoiling, leveling, cut-to-length production, slitting, bending, and general forming.
• For general commercial processing, SPCC or DC01 are commonly selected.
• For forming and drawing-related use, SPCD, SPCE, DC03, or DC04 are more suitable choices within the listed grade system.

6．Advantages

• The 0.15–3.0mm thickness range covers light to medium cold rolled sheet processing requirements.
• The width range of 750–1010mm, 1220mm, and 1250mm matches mainstream sheet and coil processing lines.
• Multiple equivalent grade systems are available, which helps match different technical and market requirements.
• Soft commercial quality, full hard quality, and deep drawing quality options allow the material to be selected according to the actual forming route.
• Coil ID of 508mm or 610mm and maximum coil weight of 11 MT support standard industrial handling and processing.

7．How to Choose

• Choose SPCC or DC01 for general commercial cold rolled sheet applications.
• Choose SPCD, SPCE, DC03, or DC04 when better forming or drawing performance is required.
• Choose full hard quality when the downstream route requires higher rigidity rather than higher ductility.
• Choose deep drawing quality when the part requires stronger drawing performance.
• Choose thickness according to final part rigidity and forming route.
• Choose width according to blank layout, production efficiency, and downstream line requirement.

8．FAQ

Q1．What is the thickness range of this cold rolled steel sheet
The thickness range is 0.15–3.0mm.

Q2．What is the width range
The width range is 750–1010mm, 1220mm, and 1250mm.

Q3．What is the coil ID
The coil ID is 508mm or 610mm.

Q4．What is the maximum coil weight
The maximum coil weight is 11 MT.

Q5．What is the MOQ
The MOQ is 50 MT per size.