PVDF Prepainted Color Steel Coil 700–1250mm Wide with 180–320MPa Yield Strength

Product Specification

PVDF Prepainted Color Steel Coil 700–1250mm Wide with 180–320MPa Yield Strength for Construction Panels and Exterior Cladding

1. Product Overview

Prepainted color steel coil is used in construction panels, roofing sheets, wall cladding, and other visible sheet applications where both surface finish and corrosion protection are required. Compared with unpainted sheet, the painted surface provides a more stable appearance while adding an extra protective barrier above the metal substrate.

For this specification, width up to 1250 mm is suitable for common roll forming and cut-to-length lines. The yield strength range of 180–320 MPa supports general bending and profiling, while PVDF coating is typically considered for projects that require stronger long-term weather resistance.

2. Technical Solution

Product performance is based on:

• Coated steel substrate combined with an organic paint film
• Top and back paint thickness matched to the application environment
• Different coating systems for different outdoor exposure levels
• Mechanical properties balanced for forming and panel rigidity
• Surface treatment selected for storage and downstream handling control

For construction use, coating type matters as much as thickness. PE is commonly used for standard projects, SMP and HDP are often selected for improved weather performance, and PVDF is widely used where stronger UV resistance and color retention are required. Paint thickness also affects surface coverage and long-term appearance.

3. Specifications

4. Application

• Roofing sheets and roof accessories
• Wall cladding and facade panels
• Ceiling panels and decorative sheet parts
• Garage doors and rolling shutter panels
• Light steel building enclosures
• Exterior and interior construction panels

5. Processing

• Cut-to-length sheet production
• Slitting into narrower strips
• Roll forming for roof and wall profiles
• Bending and folding
• Panel pressing and edge forming
• On-site installation after screw fixing or concealed fastening design

6. Advantages

• Width up to 1250 mm fits mainstream construction panel lines
• Yield strength up to 320 MPa supports general profile rigidity
• Top coating up to 25 μm provides better surface coverage for visible panels
• Multiple coating systems allow selection by climate and service requirement
• PVDF option is suitable for projects requiring stronger outdoor weather resistance
• RAL color system supports architectural color matching

7. How to Choose

• General indoor or mild outdoor use → PE is commonly selected
• Projects requiring improved weather resistance → SMP or HDP is often preferred
• Long-term exterior exposure and stronger UV resistance → PVDF is usually selected
• Higher appearance requirement → choose top coating thickness closer to 20–25 μm
• More rigid panel design → thicker sheet such as 0.8–1.2 mm is commonly used

8. FAQ

Q1: Why is PVDF often used for exterior construction panels?
Because PVDF is commonly selected when better UV resistance, color retention, and long-term weather performance are required.

Q2: Is 1250 mm width suitable for standard roll forming lines?
Yes, 1250 mm is a common working width for construction panel, roofing sheet, and cladding production lines.

Q3: Does higher yield strength always mean better performance?
Not always. Higher yield strength can improve rigidity, but formability, bend radius, coating system, and sheet thickness also affect final performance.

Q4: Is 25 μm top coating better than 10 μm?
A thicker top coat generally provides better surface coverage, but the final selection should match project environment, required service life, and cost target.

Q5: Can this coil be used for both roofing and wall cladding?
Yes, prepainted color steel coil is commonly processed into roofing sheets, wall panels, and other visible construction components.