1250mm Prepainted Color Steel Coil with 180–320MPa Yield Strength and PE / SMP /

Product Specification

1250mm Prepainted Color Steel Coil with 180–320MPa Yield Strength and PE / SMP / HDP / PVDF Coating for Outdoor Panels

1.Product Overview

Prepainted color steel coils are used in outdoor panels, wall cladding, light roofing, fencing, and other exposed sheet applications where both corrosion protection and surface appearance are required. Compared with bare metallic sheet, the prepainted system adds an organic coating layer over the steel substrate, which improves surface stability and reduces direct environmental exposure.

For outdoor use, thickness, paint system, and paint film thickness are the main practical parameters. Width up to 1250 mm also makes the coil suitable for common cut-to-length, roll forming, and panel production lines.

2.Technical Solution

Product performance is based on:

• Steel substrate with controlled yield strength and tensile strength
• Organic paint coating acting as an additional barrier layer
• Different coating systems for different exposure conditions
• Top and back paint thickness matched to panel use
• Surface treatment selected for storage and downstream handling

For exterior sheet products, coating choice matters more than color alone. PE is commonly used for standard environments, while SMP, HDP, and PVDF are generally selected when stronger weather resistance is required. Paint thickness in the 10–25 μm top coat range also affects surface coverage and long-term appearance retention.

3.Specifications

4.Application

• Outdoor wall panels
• Fence panels and boundary sheets
• Light roofing and canopy sheets
• Garage door and shutter panels
• Exterior decorative metal sheets
• General formed panels for residential and commercial projects

5.Processing

• Cut-to-length sheet production
• Slitting into narrower strips
• Roll forming for wall and roof profiles
• Bending and edge folding
• Punching and fixing hole preparation
• On-site installation after screw fixing or concealed fastening design

6.Advantages

• Width up to 1250 mm fits mainstream panel and roll forming lines
• Yield strength up to 320 MPa supports general exterior panel rigidity
• Top coating up to 25 μm improves surface coverage for visible outdoor parts
• Multiple coating systems allow selection by climate and project requirement
• RAL color range supports architectural color matching
• Coil IDs of 508 mm and 610 mm suit common decoiling equipment

7.How to Choose

• General outdoor use → PE is commonly selected for standard projects
• Higher UV and weather exposure → SMP or HDP is often preferred
• Long-term exterior color retention requirement → PVDF is usually considered
• More rigid fence or panel design → thicker sheet such as 0.8–1.2 mm is commonly used
• Higher appearance requirement → choose a top coating thickness closer to 20–25 μm

8.FAQ

Q1: Which coating system is more suitable for outdoor use?
PE is commonly used for standard exterior applications, while SMP, HDP, and PVDF are generally preferred when stronger weather resistance is required.

Q2: Is 1250 mm width suitable for standard processing lines?
Yes. 1250 mm is a common working width for cut-to-length, slitting, and roll forming equipment.

Q3: Does higher yield strength always mean better panel performance?
Not always. Higher yield strength can improve rigidity, but forming method, bend radius, coating system, and sheet thickness also affect final performance.

Q4: Is 25 μm top paint better than 10 μm for exterior panels?
A thicker top coat usually provides better surface coverage and can improve outdoor durability, but the final choice should match the service environment and cost target.

Q5: Can this coil be used for fencing panels?
Yes. It is commonly processed into fence panels, exterior sheets, and other visible outdoor components where both color finish and corrosion protection are needed.