Deep Drawing / Full Hard Cold Rolled Steel Strip / Coil, 750-1010mm, 1220mm

Product Specification

Deep Drawing / Full Hard Cold Rolled Steel Strip / Coil, 750-1010mm, 1220mm Width

1．Product Overview

Cold rolled steel coil is used where controlled thickness, stable width, and good sheet flatness are required for further blanking, bending, forming, and sheet fabrication. This specification is suitable for general commercial quality as well as drawing-related cold rolled applications through grade selection such as SPCC, SPCD, SPCE, DC01, DC03, and DC04.

The dimensional range in this specification covers 0.15–3.0mm thickness with widths of 750–1010mm, 1220mm, and 1250mm. It is supplied as coil and can also be converted to sheet length according to processing requirement.

2．Technical Solution

The product is supplied under multiple standard systems including JIS G3141, EN10130, DIN1623, GB/T 700, and SAE, which allows the material to be matched to different downstream processing routes and market requirements. Grade selection is the main basis for distinguishing general commercial use from drawing-related use.

For cold rolled coil processing, the key technical factors are thickness range, width range, coil build, and grade selection. Coil ID of 508mm or 610mm and maximum coil weight of 11 MT are suitable for common decoiling, leveling, slitting, and cut-to-length lines.

3．Specifications

4．Application

• This material is suitable for general sheet fabrication where cold rolled surface quality and dimensional control are required.
• It can be used for blanking, bending, forming, and drawing-related sheet processing according to grade selection.
• It is also suitable for coil-to-sheet conversion where sheet length is required by downstream users.

5．Processing

• The coil can be supplied for decoiling and cut-to-length production.
• It can be used for slitting and sheet conversion according to downstream width requirement.
• For general commercial processing, SPCC or DC01 grades are commonly selected.
• For drawing-related applications, SPCD, SPCE, DC03, or DC04 are more suitable choices within the listed grade system. This grade logic is supported by the specification range provided for the cold rolled coil category.

6．Advantages

• The 0.15–3.0mm thickness range covers light to medium cold rolled coil processing requirements.
• The width range of 750–1010mm, 1220mm, and 1250mm matches mainstream sheet and coil processing lines.
• Multiple equivalent grade systems are available, which helps match different market and technical requirements.
• The product can be supplied in coil form and also converted to required sheet length.
• Coil ID of 508mm or 610mm and maximum coil weight of 11 MT support standard industrial handling and processing.

7．How to Choose

• Choose SPCC or DC01 for general commercial cold rolled applications.
• Choose SPCD, SPCE, DC03, or DC04 when better drawing performance is required.
• Choose thickness according to final part rigidity and forming route.
• Choose width according to blank layout, production efficiency, and downstream line requirement.
• Choose coil or cut sheet supply according to whether the customer uses decoiling lines or direct sheet processing.

8．FAQ

Q1．What is the thickness range of this cold rolled steel coil
The thickness range is 0.15–3.0mm.

Q2．What is the width range
The width range is 750–1010mm, 1220mm, and 1250mm.

Q3．What is the coil ID
The coil ID is 508mm or 610mm.

Q4．What is the maximum coil weight
The maximum coil weight is 11 MT.

Q5．What is the MOQ
The MOQ is 50 MT per size.