Bauble Bead Stem Glass Pair 22 cm Tall Gold Ring Inlay Stemware

Bauble Bead Stem Glass Pair 22 cm Tall Gold Ring Inlay Stemware is a stemmed glass pair built around a flared bowl on a stem built around a coloured bead held by two gold rings in clear bowl, iridescent blue green bead and deep purple red bead, gold ring inlays, with smooth bowl with a decorative bead and gold ring stem. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a coloured glass bead clamped between gold rings, which turns the stem into the feature.

Bead and metal ring construction is the most fragile part of this glass, so wash trials matter more than on a plain stem. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Bead And Ring Stem: The stem is the design, not the bowl, which is unusual in this price band.
• Two Bead Colours: One iridescent, one deep purple red, sold as a contrasting pair.
• Gold Ring Inlay: Metal rings hold the bead, so the joint is a feature rather than a seam.
• 22 cm Height: Standard wine service height, so it racks with other stemware.
• Pair Format: A pair suits gift boxing without a separate pack design.
• Clear Bowl: The bowl stays plain, so the stem detail carries the piece.

This stemmed glass pair is aimed at banquet and wedding tables, gift retail and design led venues. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Bead Stem Glass
• Gold Ring Stemware
• Coloured Bead Wine Glass

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.