Amber Yellow Etched Glass Tumbler 8.3 cm Rim 10 cm Tall 220 g Geometric Pattern

Amber Yellow Etched Glass Tumbler 8.3 cm Rim 10 cm Tall 220 g Geometric Pattern Cup is a glass tumbler built around a straight wall with a level rim and a modest foot in amber yellow with white etched pattern, with crossing geometric etched lines. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the amber yellow glass carrying a white etched geometry, bright enough for seasonal retail.

Etched patterns are cheaper to run than applied colour and hold up better in washing, which is why buyers use them for promotional glassware. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Etched Geometry: The white pattern is etched into the surface, so it does not peel like a printed transfer.
• Amber Yellow Body: A warm yellow tone lifts a plain table setting and suits summer and autumn promotions.
• 220 g Light Weight: Low unit weight reduces freight per container for volume buyers.
• Straight Profile: A near vertical wall stacks easily and gives a generous 8.3 cm opening.
• Clear Interior: The inside is smooth and unetched, so the drink stays visible and taste neutral.
• Easy Care: Etched decoration tolerates normal white spirits and detergents in washing.

This glass tumbler is aimed at homeware retail, cafe tables, gift sets and promotional programmes. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Amber Yellow Etched Tumbler
• Geometric Pattern Cup
• Lightweight Glass Tumbler

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.