Green Rim Swirl Glass Tumbler 9 cm Rim 9 cm Tall 280 g Clear Bubble Body Drink

Green Rim Swirl Glass Tumbler 9 cm Rim 9 cm Tall 280 g Clear Bubble Body Drink Cup is a glass tumbler built around a short straight body with a level rim and a small foot in clear with a green painted rim and a swirling internal texture, with spiral swirl inside the wall with a fired green rim band. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a clear body with an internal swirl and a single green rim band, a restrained bar look.

Buyers pairing this with coloured stemware usually take the green rim version to keep a single accent colour across the table. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Green Rim Band: A fired green line on the rim gives colour without colouring the drink, and it matches the swirling body texture.
• Internal Swirl: The spiral formed inside the wall refracts light and hides water marks better than a plain polished surface.
• Compact 9 by 9 cm: An equal height and rim diameter keeps the glass low and stable for crowded tables.
• 280 g Balanced Weight: Light enough for volume orders, heavy enough to feel solid once filled.
• Clear Drinking Surface: Only the rim is decorated, so the inside stays perfectly clear and neutral in taste.
• Simple Service Care: The rim band is fired on, and normal hand or machine washing keeps it intact.

This glass tumbler is aimed at cocktail bars, cafe tables, hotel restaurants and home entertaining. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Green Rim Swirl Tumbler
• Clear Bubble Body Cup
• Coloured Rim Glassware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.