Hammered Amber Glass Tumbler 8.2 cm Rim 10 cm Tall 300 g Thick Base Whiskey Cup

Hammered Amber Glass Tumbler 8.2 cm Rim 10 cm Tall 300 g Thick Base Whiskey Cup is a glass tumbler built around a short straight body with a thick base and squared rim edges in amber with hammered texture, with hammered dimple surface across the whole body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the amber glass with a hammered surface, aimed at whiskey service where texture masks wear.

The hammered pattern also serves a commercial purpose: small chips blend into the surface, which extends the working life of a glass in a busy bar. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Hammered Surface: The dimpled wall scatters reflections and hides scuffs and fingerprints in heavy service.
• Amber Tone: The amber body deepens the colour of dark spirits and photographs well in backlit bar settings.
• Thick Base: A reinforced 6.5 cm base lowers the centre of gravity and protects against thermal shock on bar tops.
• 300 g Balanced Weight: Substantial without being tiring, which suits long shifts where the same glass is reused.
• Squared Rim Edges: The rim keeps a defined edge that stays comfortable on the lip after repeated washing.
• Pressed Consistency: Mould pressing gives even wall thickness, so breakage rates stay predictable for buyers.

This glass tumbler is aimed at whiskey bars, hotel lounges, home bars and rustic style retail ranges. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Hammered Amber Tumbler
• Thick Base Whiskey Cup
• Textured Amber Glassware

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.