Diamond Facet Glass Tumbler 8 cm Rim 10.5 cm Tall 172 g Lower Body Cut Texture

Diamond Facet Glass Tumbler 8 cm Rim 10.5 cm Tall 172 g Lower Body Cut Texture is a glass tumbler built around a tapered body with a smooth upper wall and a faceted lower half in clear and colourless, with diamond lattice relief on the lower body. It is produced in our glass workshop for buyers who need a repeatable decorative programme rather than a one off sample, and the piece shown here carries the a smooth upper wall above a diamond lattice base, cut style detail at a pressed glass price.

The two zone design means the piece can sit in a premium cocktail list and still be replaced cheaply when breakages happen. Every unit is annealed in a controlled lehr so that wall stress stays within our breakage specification, and dimensions are checked against the measurement sheet printed on the photography. The result is a glass that looks individual on the shelf but behaves predictably in a container load.

• Diamond Lattice Base: The lower half carries a diamond relief that refracts light and adds grip where the hand sits.
• Smooth Upper Wall: The clear upper section keeps the drink visible, which matters for garnished serves.
• 172 g Light Weight: Low unit weight keeps freight and replacement cost down for high turnover outlets.
• 8 cm Rim Opening: The wide mouth takes large ice cubes and bar tools without splashing.
• Stable 5 cm Base: A compact base with a solid punt keeps the tapered body upright on trays.
• Everyday Durability: Pressed construction and an annealed body suit repeat washing and stacking.

This glass tumbler is aimed at cocktail bars, restaurant service, home bars and volume replacement programmes. Buyers typically place it in a range that needs one recognisable decorative accent without moving to a full bespoke mould, and because the body is a standard production shape the tooling cost is already absorbed into the piece price.

In service the glass is expected to move between back of house washing and front of house display several times a day. The surface withstands standard commercial detergents, and the rim geometry has been kept simple so that stacking and racking do not put point loads on the lip. For retail programmes the same item can be boxed as a single unit or combined with the matching pieces in our range to build a story around colour and pattern.

Sampling buyers usually test three things: whether the decoration survives twenty dishwasher cycles, whether the base sits flat on a granite or marble surface, and whether case pack dimensions match their pallet plan. All three can be confirmed with a stock sample before any production deposit is placed.

Each piece is packed in a moulded pulp or corrugated divider inside a five layer export carton, with a printed sleeve available for retail programmes. Case pack quantities are set so that a full pallet loads without void fill, which keeps freight cost per unit down for mixed container orders.

Production is inspected at three points: incoming glass quality, decoration placement, and final packing. AQL inspection follows the usual 2.5 major and 4.0 minor plan unless a buyer specifies otherwise, and we keep a retained sample from each run so that repeat orders can be matched for colour and pattern density.

• Diamond Facet Glass Tumbler
• Cut Texture Lower Body
• Lightweight Bar Cup

Hand washing with a soft sponge is recommended where a decorative surface is present, and dishwasher use is acceptable on a normal cycle at moderate temperature. Avoid sudden temperature change such as pouring boiling liquid into a chilled glass, since thermal shock remains the most common cause of breakage in any annealed glassware. Stored correctly, the piece is designed for years of daily use.