| Working Principle | DC Variable Frequency Attenuation |
| Demagnetization Time | Manual 3min Automatic 9min |
| Application | 35kV and Above Transformers |
| Fuse Rating | 8A AC220V |
| Payment Terms | T/T |
| Supply Ability | 3000unit/year |
| Delivery Time | 5-8 work days |
| Packaging Details | wooden packaging |
| Instrument Composition | Host Power Cable Test Lines Ground |
| Demagnetization Mode | Manual and Automatic |
| Demagnetization Progress | 0 to 100 Percent |
| Power Supply | AC 220V Plus Minus 10 Percent |
| Control Buttons | Red Reset Green Start |
| Data Acquisition | 16-bit AD Processing |
| Demagnetization Effect | More Than 90 Percent Per Pass |
| Power Frequency | 50Hz Plus Minus 1Hz |
| Three Phase Method | Phase B Only |
| Display | LCD Chinese Interface |
| Demagnetization Current | 5A 1A 200mA 5mA Customizable |
| Brand Name | XZH TEST |
| Model Number | XHXC105 |
| Certification | ISO CE |
| Place of Origin | Xi'an Shaanxi China |
View Detail Information
Explore similar products
Wireless Zinc Oxide Surge Arrester Live Tester 0-10mA 25V-250V Six Test Modes 8
Wireless Zinc Oxide Arrester On-Line Tester LCD Fundamental Wave 3rd to 7th
Handheld Zinc Oxide Surge Arrester Live Tester Wireless Six Test Methods
Wireless Zinc Oxide Arrester Live Tester 433MHz 100m 0-10mA Resistive Current
Product Specification
| Working Principle | DC Variable Frequency Attenuation | Demagnetization Time | Manual 3min Automatic 9min |
| Application | 35kV and Above Transformers | Fuse Rating | 8A AC220V |
| Payment Terms | T/T | Supply Ability | 3000unit/year |
| Delivery Time | 5-8 work days | Packaging Details | wooden packaging |
| Instrument Composition | Host Power Cable Test Lines Ground | Demagnetization Mode | Manual and Automatic |
| Demagnetization Progress | 0 to 100 Percent | Power Supply | AC 220V Plus Minus 10 Percent |
| Control Buttons | Red Reset Green Start | Data Acquisition | 16-bit AD Processing |
| Demagnetization Effect | More Than 90 Percent Per Pass | Power Frequency | 50Hz Plus Minus 1Hz |
| Three Phase Method | Phase B Only | Display | LCD Chinese Interface |
| Demagnetization Current | 5A 1A 200mA 5mA Customizable | Brand Name | XZH TEST |
| Model Number | XHXC105 | Certification | ISO CE |
| Place of Origin | Xi'an Shaanxi China | ||
| High Light | Demagnetization in Under 4 Minutes ,Manual and Automatic Modes ,Over 90 Percent Per Pass | ||
XHXC105 Transformer Demagnetizer — dedicated equipment for eliminating the residual magnetism left in large power transformers and instrument transformers after DC resistance and voltage ratio tests, protecting them against inrush-current impact and supporting safe commissioning.
Because of the intrinsic hysteresis of ferromagnetic materials, residual magnetism remains in the iron core after operations such as voltage-ratio and DC-resistance measurement on a power transformer. When the transformer is put into operation, this residual magnetism causes the core to saturate for half of each cycle and generates a large number of harmonics in the excitation current. This increases reactive power consumption and may cause relay protection misoperation — so demagnetization must be carried out before the transformer is commissioned.
The XHXC105 adds an automatic demagnetization mode over the previous series (no repeated operation needed), uses a larger LCD module for richer information, and adopts two-key operation: the red key for selection and reset, and the green key for confirmation and start. Demagnetization time has been reduced from 30 minutes to under 4 minutes.
Why Demagnetize: The Harm of Residual MagnetismAccording to the manual, residual magnetism can cause serious problems for a power system:
The XHXC105 offers two working modes, selected with the red reset key and confirmed with the green start key:
| Item | Automatic Mode | Manual Mode |
|---|---|---|
| Selection | Red key cycles to auto, green key starts | Red key cycles through current gears, green key starts |
| Current sequence | Automatically follows 5A, 1A, 200mA, 5mA | User selects the current gear (5A / 1A / 200mA / 5mA) |
| Operation | Runs to 100% progress then discharges automatically | Runs the selected gear to completion |
| Demagnetization time | 9 min per pass | 3 min per pass |
| Best for | Routine, hands-off demagnetization | Control over a specific current level |
| Demagnetization Current | 5A, 1A, 200mA, 5mA (customizable) |
| Demagnetization Mode | Manual / Automatic |
| Demagnetization Time | Manual 3min per pass; Automatic 9min per pass |
| Demagnetization Effect | Greater than 90% per pass |
| Demagnetization Progress | 0 – 100% |
| Power Supply | AC 220V ±10% |
| Power Frequency | 50Hz ±1Hz |
| Ambient Temperature | -25°C – 50°C |
| Ambient Humidity | ≤90% |
| Weight | 5kg (excluding test line) |
The instrument uses the DC attenuation variable-frequency principle:
The XHXC105 is aimed at the teams that energize and commission large power transformers and instrument transformers:
Xi’an Xuzhihui Electromechanical Technology Co., Ltd. (XZH TEST). The instrument carries a one-year warranty against quality problems from the date of purchase, with lifetime repair and technical service.
Service line: 400-029-0829
Mailing address: Building B8-01, Phase I, Ronghao Industrial City, No. 2098 Weiyang 9th Road, Gaoling District, Xi’an
Company Details
Business Type:
Manufacturer
Year Established:
2013
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification:
Verified Supplier
Xi'an Xu&Hui Electromechanical Technology Co., Ltd. /Xian XZH Electric Power Technology Co., Ltd. Has found in 2013, located in Xi'an, China. which is a highly experienced team dedicated to developing electrical... Xi'an Xu&Hui Electromechanical Technology Co., Ltd. /Xian XZH Electric Power Technology Co., Ltd. Has found in 2013, located in Xi'an, China. which is a highly experienced team dedicated to developing electrical...
Get in touch with us
Leave a Message, we will call you back quickly!