| Measurement Error | ≤±(0.5%×L+1m) |
| Sampling Frequency | 100MHz |
| Weight | 4.6kg |
| Low Voltage Pulse Amplitude | 35V |
| Payment Terms | T/T |
| Test Blind Spot | ≤35m |
| Battery | 10400mAH lithium battery |
| Delivery Time | 7-10 Days |
| Packaging Details | wooden packaging |
| Ranging Range | ≥16km |
| Display | 10-inch industrial-grade touch LCD |
| Supply Ability | 500 units per month |
| Pulse Width | 0.2uS/2uS |
| Minimum Resolution | 1.0m |
| Model Number | XHGG501D |
| Certification | CE/ISO |
| Place of Origin | Xi'an, Shaanxi, China |
| Brand Name | XZH TEST |
View Detail Information
Explore similar products
ARC Multi-Pulse Cable Fault Pre-Locator 10.1-inch Touch 120km Range 400MHz
TDR Cable Fault Pre-Locator Portable with Printer 30km Range 5.7-inch LCD
ARC Multi-Pulse Cable Fault Pre-Locator 400MHz 120km Range 0.07m Resolution with
ARC Cable Fault Pre-Locator with Report Generator | 12.1-inch 400MHz 68km |
Product Specification
| Measurement Error | ≤±(0.5%×L+1m) | Sampling Frequency | 100MHz |
| Weight | 4.6kg | Low Voltage Pulse Amplitude | 35V |
| Payment Terms | T/T | Test Blind Spot | ≤35m |
| Battery | 10400mAH lithium battery | Delivery Time | 7-10 Days |
| Packaging Details | wooden packaging | Ranging Range | ≥16km |
| Display | 10-inch industrial-grade touch LCD | Supply Ability | 500 units per month |
| Pulse Width | 0.2uS/2uS | Minimum Resolution | 1.0m |
| Model Number | XHGG501D | Certification | CE/ISO |
| Place of Origin | Xi'an, Shaanxi, China | Brand Name | XZH TEST |
| High Light | TDR cable fault locator with touch screen ,100MHz cable fault tester with IP54 ,16km ranging TDR pre-locator | ||
The XHGG501D cable fault tester adopts an industrial-grade 10-inch touch LCD with a simple operation software interface and microcontroller centralized control. Using modern electronic technology, it achieves signal filtering, acquisition, data processing, graphic display and graphic analysis, completing cable speed measurement, cable length test, cable fault distance test and resistance test.
This cable fault tester is a specialized instrument for measuring and analyzing the fault status and distance of power cables. It is suitable for low-resistance, short-circuit, open-circuit and broken wire faults of power cables, coaxial cables, street light cables and buried wires of various materials with different cross-sections and media, as well as leakage and flashover high-resistance faults. It supports both the low-voltage pulse method and the high-voltage flashover method (direct flash and impulse flash).
Industrial-grade 10-inch touch LCD display with clear waveform and menu display;
Centralized control by microcontroller, touch-based operation mode, strong anti-interference ability;
Equipped with distance measurement, speed measurement and resistance measurement functions;
Fully automatic continuous sampling, timely and accurate waveform capture;
Equipped with low-voltage pulse sampling method and high-voltage flashover sampling method (direct flash and impulse flash);
Built-in large-capacity 10400mAH lithium battery pack, convenient to use on site;
Adopts a protective case, not lower than IP54.
| Parameter | Specification |
|---|---|
| Sampling frequency | 100MHz |
| Low voltage pulse amplitude | 35V |
| Pulse width | 0.2uS/2uS |
| Minimum resolution | 1.0m |
| Test blind spot | ≤35m |
| Distance measurement range | ≥16km |
| Measurement error | ≤±(0.5%*L+1m), L is the cable length |
| Display | 10-inch industrial-grade touch LCD |
| Power supply method | Charging AC110V~240V, 50Hz/60Hz; built-in 10400mAH lithium battery (1 hour charging, 2.5 hours standby) |
| Working conditions | -20~+65℃, relative humidity ≤90% |
| Volume | 358L*284W*168H |
| Weight | 4.6kg |
| Protection | Protective case not lower than IP54 |
| Application Scenario | Typical Applications |
|---|---|
| Wastewater Treatment Plants | Pre-locating faults in plant distribution cables to keep pumps and treatment lines running |
| Universities & Research Institutes | Testing campus buried power cables with the touch-screen instrument for simple operation |
| Municipal Public Works & Street Lighting | Locating faults in street lighting and public facility feeder cables quickly |
| EV Charging Networks | Fault pre-location for charging station power cables to minimize station downtime |
| Item | Quantity |
|---|---|
| Cable fault pre-locator | 1 unit |
| Low-voltage sampling line (single Q line) | 1 piece |
| High-voltage sampling line (double Q line) | 1 piece |
| Sampler | 1 piece |
| Sampling box | 1 piece |
| Power cable | 1 piece |
| Fuse | Spare parts |
| Grounding wire | 1 piece (optional) |
Company Details
Business Type:
Manufacturer
Year Established:
2013
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification:
Verified Supplier
Xi'an Xu&Hui Electromechanical Technology Co., Ltd. /Xian XZH Electric Power Technology Co., Ltd. Has found in 2013, located in Xi'an, China. which is a highly experienced team dedicated to developing electrical... Xi'an Xu&Hui Electromechanical Technology Co., Ltd. /Xian XZH Electric Power Technology Co., Ltd. Has found in 2013, located in Xi'an, China. which is a highly experienced team dedicated to developing electrical...
Get in touch with us
Leave a Message, we will call you back quickly!