Product Specification

Reliable Ni-Mh Hybrid Batteries Pack For Checrolet Silverado 2009~2013

Products Specification

Advantage of Yaste hybrid car battery aftermarket

• All with class A new cell
• Each battery module is 100% tested to ensure the optimal performance
• Entire battery pack is balance for consistent efficient
• Better heat disipation, better fuel economy
• 3 years or 100,000km whichever comes first
• Works smoothly in different weather condition
• Compatible with a wide range of vehicles with cost-effective

YASTE Laboratory Test Data

• Performance of different discharge rate 

Battery test (Free trainning)

• For stock hybrid car battery maintanence
• For hybrid car Battery performance test
• For hybrid car battery balancing
• For used hybrid car battery selecting

Packaging

Carton Size: 24.02*13.39*7.09 inch*2 Carton (Packaging consists of cardboard boxes and foam. Relevant wiring harness will be package by small boxes)

1 Pallet(1.1*1.1m) can load 36 cartons.

1 20' container can load 480 cartions.

Payment & Delivery

• TT, Credit Card, PayPal, USDT
• Delivered by UPS, DHL, TNT, EMS or local truck by terms of FOB, CIF, DDU and DDP.
• Shipping time is 4~7 days by express, 15~45 days by sea, and 30~65 days by local truck.

Q&A

The P0A1F error code in hybrid cars refers to an issue with the "Battery Energy Control Module." This code indicates that the vehicle's powertrain control module (PCM) has detected a malfunction in the hybrid battery energy control module, which is responsible for managing the hybrid battery's state of charge and overall performance. Here are some potential causes and steps to address this error code:

Possible Causes

1. Faulty Battery Energy Control Module: The module itself might be defective.
2. Wiring Issues: There could be damaged or corroded wiring or connectors in the hybrid battery system.
3. Hybrid Battery Issues: The hybrid battery pack might have issues, such as damaged cells.
4. Software Problems: There could be a need for an update or reprogramming of the control module software.
5. Sensor Issues: Faulty sensors that monitor the battery's state of charge and health.

Symptoms

• Illuminated Check Engine Light: The primary symptom is the check engine light coming on.
• Reduced Performance: There may be noticeable changes in the vehicle's performance, such as reduced power or efficiency.
• Hybrid System Warning Light: In some cases, a specific hybrid system warning light may also illuminate.

Diagnostic and Repair Steps

1. Read and Clear Codes: Use an OBD-II scanner to read and clear the error codes, then see if the code reappears.
2. Inspect Wiring and Connectors: Check for any visible damage, corrosion, or loose connections in the hybrid battery wiring and connectors.
3. Check the Hybrid Battery: Test the hybrid battery pack to ensure there are no issues with individual cells.
4. Software Update: Check if there is a software update available for the battery energy control module.
5. Replace the Module: If other steps do not resolve the issue, the battery energy control module may need to be replaced.

It's recommended to have this issue diagnosed and repaired by a qualified technician, especially those experienced with hybrid vehicles, as the hybrid system components can be complex and dangerous to handle without proper knowledge and equipment