Product Specification

202V 6.5Ah Hybrid Car Battery Pack Replacement For Toyota Prius Gen3

Toyota Prius Gen3 Hybrid Battery

Advantage of Yaste hybrid car battery aftermarket

• All with class A new cell, contains 14 modules
• Each battery module is 100% tested to ensure the optimal performance
• Entire battery pack is balance for consistent efficient
• Better heat disipation, better fuel economy
• 2 years or 100,000km whichever comes first
• Works smoothly in different weather condition
• Compatible with a wide range of vehicles with cost-effective

YASTE Laboratory Test Data

• 30C discharging performance
• Low temperature performance (1C in -4°F) & (0.2C in -40°F)
• 15C discharging performance
• 15C charging performance

Battery test (Free trainning)

• For stock hybrid car battery maintanence
• For hybrid car Battery performance test
• For hybrid car battery balancing
• For used hybrid car battery selecting

Packaging

Carton Size: 500*360*192mm*2 Carton (Packaging consists of cardboard boxes and foam. Relevant wiring harness will be package by small boxes)

1 Pallet(1.1*1.1m) can load 36 cartons.

1 20' container can load 480 cartions.

Payment & Delivery

• TT, Credit Card, PayPal, USDT
• Delivered by UPS, DHL, TNT, EMS or local truck by terms of FOB, CIF, DDU and DDP.
• Shipping time is 4~7 days by express, 15~45 days by sea, and 30~65 days by local truck.

Q&A

What is P3011 Hybrid Car Battery Error Codes?

The P3011 error code for a hybrid car typically indicates a problem with one of the battery modules in the hybrid battery pack. Specifically, it often points to a fault in battery module number 1. Here’s a breakdown of what the code generally means:

• P3011: This code is associated with the hybrid battery system, indicating an imbalance or failure in battery module 1.
• Possible causes:
  • Battery cell deterioration or failure in module 1.
  • Poor electrical connection or wiring issues in module 1.
  • Faulty battery control module or sensor issues.

Steps to Diagnose and Fix P3011 Code:

1. Scan the Hybrid System: Use an advanced scan tool to confirm the P3011 code and check for any additional codes.
2. Inspect Battery Module 1:
   • Check the voltage levels of all cells within module 1.
   • Look for any signs of physical damage or corrosion.
3. Check Connections: Ensure that all electrical connections related to module 1 are secure and free from corrosion.
4. Battery Control Module: Verify the proper functioning of the battery control module. If it’s defective, it might need to be replaced or reprogrammed.
5. Replace the Faulty Module: If module 1 is found to be faulty, replace it with a new or reconditioned module.

Note:

Working on hybrid batteries can be dangerous due to high voltage. It’s recommended to have a trained technician or professional handle the diagnosis and repair of hybrid battery systems.