Floor Standing Residential Energy Storage Systems 16 KWh Long Lasting Home

RESIDENTIAL ENERGY STORAGE · FLOOR-STANDING BATTERY

16 kWh of Home Storage in a Floor-Standing Cabinet

The YINTU YT-Standing ESS-16kWh is a low-voltage LiFePO4 battery rated at 16 kWh, 51.2 V and 314 Ah. Its floor-standing enclosure, four caster wheels and local status indicators provide a practical format for residential storage projects that use a separate inverter.

Pair the battery with a compatible external hybrid or battery inverter to build the required solar-storage or backup configuration. The battery does not contain a solar inverter and does not supply household AC loads directly. YINTU coordinates product selection and system matching using products supplied by capable manufacturing partners.

Key Product Features

• 16 kWh rated energy: a defined storage capacity for residential system planning.
• LiFePO4 chemistry: lithium iron phosphate cells for stationary energy storage.
• 100 A standard current: maximum continuous charge and discharge current is specified at 200 A.
• Parallel expansion: supports configurations of 1 to 15 units, subject to the approved system design.
• Local monitoring: Run, Alarm and SOC indicators, plus a built-in Bluetooth module.
• Multiple interfaces: RS485, RS232, CAN and dry contact for integration with compatible equipment.
• Four caster wheels: help position the floor-standing cabinet during installation.

Residential Applications

Use this battery as the storage component in a home solar system, an essential-load backup arrangement or a residential project requiring additional stored energy. The external inverter determines solar input, AC output, grid interaction and backup operation. Select the inverter and protection equipment around the actual household loads and installation requirements.

Application illustration. The inverter, electrical panel, cabling and accessories are separate system components unless included in the quotation.

How the Battery Connects to a Solar System

Solar panels connect to the external hybrid inverter. The battery connects to its battery DC interface and uses a compatible BMS communication link. The inverter manages energy conversion for household loads and any permitted grid interaction. System operating modes depend on the selected inverter and final installation design.

System concept only; this is not an installation wiring drawing. Confirm voltage range, current limits, communication protocol and protection requirements before installation.

Battery and Electrical Specifications

The meaning of “70%” and the cycle-test conditions require confirmation; this figure is not presented as a verified depth-of-discharge or remaining-capacity rating. Battery current limits must be coordinated with the inverter, cables, protective devices and operating conditions. Cycle life does not define a warranty period.

Parallel Capacity Planning

The datasheet supports up to 15 units in parallel. Examples below use the stated 16 kWh rating per unit; actual usable energy and household runtime depend on system settings, conversion losses and the load profile.

Confirm battery matching, communication setup, interconnection hardware and the inverter configuration before expansion. Adding battery capacity does not by itself establish the AC output power of the complete system.

Dimensions, Weight and Operating Conditions

Product and package dimensions are reproduced as supplied. Confirm orientation, service clearances, floor loading and handling arrangements against the installation documentation. Casters assist positioning; they do not make this 120 kg battery a portable power station. The datasheet does not state an ingress-protection rating, so installation suitability must be confirmed for the intended location.

Monitoring, Communication and Documentation

The datasheet lists inverter communication for Victron, Voltronic, SMA, AISWEI, Studer, GoodWe, Growatt and Deye. Compatibility depends on the exact inverter model and communication protocol; this is not a claim that every inverter from these brands is supported.

The source lists “IEC” without a standard number. Available reports, applicable standards and model coverage must be checked for the offered product and destination market; the list above is not a blanket certification claim.

Frequently Asked Questions

Is this an all-in-one solar inverter system?

No. It is a floor-standing battery. A compatible external inverter and the required PV, electrical protection and installation accessories are specified separately.

What is the difference between 100 A and 200 A?

The datasheet states 100 A as the standard charge/discharge current and 200 A as the maximum continuous charge/discharge current. Final settings must comply with all system-component limits.

Can more batteries be added later?

The specified parallel range is 1-15 units. Expansion requires a compatible battery configuration and an approved procedure for matching, connections and communication.

How long can it run a household?

There is no single runtime for every home. Runtime depends on usable battery energy, the connected loads, inverter efficiency and operating limits. Provide your essential-load list for configuration planning.

Does Bluetooth provide remote cloud monitoring?

The datasheet confirms a built-in Bluetooth module. Cloud monitoring, app functions and remote access are not specified and should be confirmed for the offered configuration.

Configure Your Residential Storage Solution with YINTU

YINTU is an energy storage solution provider. We work with capable manufacturing partners to select suitable battery products and coordinate component matching, technical information and supply requirements for each project.

For a configuration review, send the destination country, exact inverter model, target storage capacity, essential-load demand, installation location and expected quantity. We can help define the battery quantity and quotation scope. Installation documentation, model-specific reports, warranty and delivery terms are confirmed for the offered configuration.

Source: YT-Standing ESS-16kWh English datasheet, V1.0 (2026.10). Final specifications and configuration are confirmed before order.