7.5 Mil Heat Healing Color Change TPU PPF Car Paint Protection Film Scratch

This 7.5 mil colored TPU film lets vehicle owners refresh the exterior appearance while shielding the factory finish underneath. A vivid color layer sits on a tough thermoplastic polyurethane body that absorbs light impacts, resists environmental stains, and keeps the original paintwork in showroom condition for years.

• Color refresh: a broad palette of finishes personalizes the car exterior without a costly respray.
• Heat-activated repair: fine scratches fade away under sunlight or hot water, restoring a smooth look.
• Impact and stain defense: guards the paint against stone chips, bird droppings, tree sap, acid rain and chemical residue.
• Easy-care surface: the hydrophobic top coat makes water bead off and keeps dirt from sticking, so routine washing stays quick.
• Clean removal: the professional adhesive releases without residue and leaves the original paint untouched.

Beyond the standard color change film, the same production line offers a full range of finishes and builds:

• Entry clear films: TPU-X65 at 6.5 mil and TPU-X75 at 7.5 mil, both based on Agutec TPU with 8-year coverage and the highest hydrophobicity rating.
• Premium clear films: TPU-Q8 Pro at 8 mil, TPU-A85+ at 8.5 mil and TPU-Shield at 10 mil, all built on Lubrizol TPU with 10-year coverage.
• Color and finish films: TPU-AMT matte at 8 mil, TPU-G.B gloss black at 7.5 mil and TPU-M.B matte black at 7.5 mil, all Lubrizol-based with 10-year coverage.

• Front bumper, hood and fenders where stone impacts are most frequent
• Side mirrors, door edges and handle areas prone to scratches
• Roof and trunk surfaces exposed to bird droppings and sap
• Full-body wrapping for a complete color change with protection

1. Clean the panel with isopropyl alcohol and let it dry before application.
2. Spray a slip solution on both the adhesive side and the paint surface.
3. Position the film and slide it into place while the surface is still wet.
4. Squeegee from the center outward to push out liquid and air pockets.
5. Warm the edges with a heat gun and tuck them around the panel curves.
6. Avoid washing the vehicle for 7 days so the adhesive can cure fully.

Custom branding, private-label packaging, special roll sizes and unique colors are all available. Samples in A4 size can be provided before bulk orders so buyers can verify the film quality first.

The film complies with ROHS, ISO9000 and MSDS standards, with test reports available on request.

Stock orders leave within 3-7 working days. Monthly output reaches 1,000,000 rolls, and each roll ships in an export carton of 162 x 19 x 21 cm. Payment methods include L/C, T/T, Western Union, D/A, D/P and MoneyGram.

• Q1. How does this film differ from PVC wrap? A1: TPU offers better elasticity, self-healing ability and resistance to yellowing, making it the preferred material for paint protection.
• Q2. What kind of damage can it stop? A2: It blocks stone chips, light scratches, bird droppings, tree sap, acid rain and chemical stains.
• Q3. How does the self-healing effect work? A3: Minor marks disappear when the surface is warmed by sunlight or hot water.
• Q4. Is the original paint safe when the film is removed? A4: Yes, the adhesive is designed to release cleanly without leaving residue.
• Q5. How long does the film normally last? A5: With proper care, service life is typically 5-10 years depending on conditions.