Shenzhen YZY Technology Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 10000 pieces |
| Delivery Time | 14-60 days |
| Packaging Details | 12*4*2 |
| Brand Name | YZY |
| Model Number | YOK0096MGS-Q1（MSP096B/W/Y） |
| Certification | CE, ROHS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
0.42 Inch 72x40 Dot Matrix OLED Module SS1306 COG Design I2C 4-Pin 3.3~5V
GME6432-06 0.49 Inch 64x32 Dot Matrix OLED Display Module with SSD1315 Driver
0.66 Inch 64*48 Dot Matrix OLED Module 0.66-4pin SSD1306 I2C 4-Pin 3.3~5V
128x64 I2C OLED Display Module 0.96" SSD1306 COG White GME096WBY-B-467
Product Specification
| Payment Terms | T/T | Supply Ability | 10000 pieces |
| Delivery Time | 14-60 days | Packaging Details | 12*4*2 |
| Brand Name | YZY | Model Number | YOK0096MGS-Q1（MSP096B/W/Y） |
| Certification | CE, ROHS | Place of Origin | Guangdong, China |
| High Light | 0.96 inch OLED display module ，SSD1306 OLED module for Arduino ，128x64 resolution OLED display | ||
The OLED module has a display size of 0.96 inches and has a 128x64 resolution. Three-wire system, 4-wire SPI and IIC communication modes can be selected, and the driver IC is SSD1306 . Contains three modules in black, blue or yellow and blue.
0.96 inch OLED screen with black and white, black or blue or yellow and blue color display
128x64 resolution for clear display and high contrast
Large viewing angle: greater than 160°(one screen with the largest viewing angle in the display)
Wide voltage supply (3V~5V), compatible with 3.3V and 5V logic levels, no level shifting chip required
The default is 4-wire SPI bus,which can choose 3-wire or IIC bus
Ultra-low power consumption: normal display is only 0.06W (far below the TFT display)
Military-grade process standards, long-term stable work
Provides a rich sample program for STM32, C51,Arduino, Raspberry Pi and MSP430 platforms
Provide underlying driver technical support
NOTE:
1. This module supports IIC, 3-wire SPI and 4-wire SPI interface bus mode switching (shown in red box in Figure 2).
The details are as follows:
A. Using 4.7K resistance to solder only R3 and R4 resistors, then choose4-wire SPI bus interface (default);
B. Using 4.7K resistance to solder only R2 and R3 resistors, then select the3-wire SPI bus interface;
C. Using 4.7K resistance to solder only R1, R4, R6, R7 and R8 resistors, then select the IIC bus interface;
2. After the interface bus mode is switched, you need to select the corresponding software and the corresponding
wiring pins (as shown in Figure 1) for the module to operate normally. The corresponding wiring pins are described
as follows:
A. select the 4-wire SPI bus interface, all pins need to be used;
B. select the 3-wire SPI bus interface, only the DC pin does not need to be used(it can not be connected), other
pins need to be used;
C. select the IIC bus interface, only need to use the four pins GND,VCC, D0, D1, At the same time, the RES pin is
connected to the high level (can be connected to the VCC), the DC and CS pins are connected to the power GND;
important:
1. The following pin numbers 1~7 refer to the module pin number of our company with PCB backplane. If you
purchase a bare screen, please refer to the pin definition of the bare screen specification, refer to the wiring
according to the signal type instead of directly according to the following. The module pin number is used for wiring.
2. About VCC supply voltage: The OLED display module can be connected to 3.3V or 5V.
Company Details
Business Type:
Manufacturer,Exporter,Seller,Agent,Trading Company
Year Established:
2008
Total Annual:
6000000-8000000
Employee Number:
150~230
Ecer Certification：
Verified Supplier
Shenzhen Yingzhanying Technology Co., Ltd. was established in January 2018 and is located in Shenzhen, China -this global hubcity for the electronics industry. The company has always been dedicated top roviding customized services, research and development,sales,and after-aless ervices i... Shenzhen Yingzhanying Technology Co., Ltd. was established in January 2018 and is located in Shenzhen, China -this global hubcity for the electronics industry. The company has always been dedicated top roviding customized services, research and development,sales,and after-aless ervices i...
Get in touch with us
Leave a Message, we will call you back quickly!