Guangzhou Guangxin Communication Equipment Co., Ltd.
| Payment Terms | T/T, L/C, Western Union, MoneyGram |
| Supply Ability | 500 sets per month |
| Delivery Time | 20-30 days |
| Packaging Details | plastic bubble sheets or cloth package by bundle |
| Name | GSM Mircrowave Radio Steel Tower For Signal WIFI Telecommunication Antenna |
| Material | Weldable Structural Angle Steel Plates or pipes |
| Surface Finish | Hot-dip Galvanized or Painting |
| Height | 20m to 80m height |
| Material Grade | GB Q235, Q345, Q355 or specified grade |
| Yield Strength | 235~355MPa |
| Galvanized Thickness | 65~85 Microns |
| Design | Lattice Frame Constructure |
| Wind Load | 0.36-1.0kN/sqm |
| Color | Grey color coating |
| Brand Name | GUANGXIN |
| Model Number | GX-3499 |
| Certification | ISO9001 |
| Place of Origin | Guangzhou, China |
View Detail Information
Explore similar products
50m GSM FM 5G Telecom Steel Tower 3 Platforms Hot Dip Galvanized
25m 80m Q355 Hot Dip Galvanized Steel Tower 3 Legged Self Supporting
35m 3 Leg Tubular Telecom Steel Tower Q345 Q235 For Macrocell Antennas
35m Tubular Telecom Steel Tower 2 Platforms For Mounting Telecom Antennas
Product Specification
| Payment Terms | T/T, L/C, Western Union, MoneyGram | Supply Ability | 500 sets per month |
| Delivery Time | 20-30 days | Packaging Details | plastic bubble sheets or cloth package by bundle |
| Name | GSM Mircrowave Radio Steel Tower For Signal WIFI Telecommunication Antenna | Material | Weldable Structural Angle Steel Plates or pipes |
| Surface Finish | Hot-dip Galvanized or Painting | Height | 20m to 80m height |
| Material Grade | GB Q235, Q345, Q355 or specified grade | Yield Strength | 235~355MPa |
| Galvanized Thickness | 65~85 Microns | Design | Lattice Frame Constructure |
| Wind Load | 0.36-1.0kN/sqm | Color | Grey color coating |
| Brand Name | GUANGXIN | Model Number | GX-3499 |
| Certification | ISO9001 | Place of Origin | Guangzhou, China |
GSM Mircrowave Radio Steel Tower For Signal WIFI Telecommunication Antenna
Specification:
1. Material: Normally Q345B/A572, Minimum Yield Strength ≥ 345 N/mm²
Q235B/A36, Minimum Yield Strength ≥ 235 N/mm²
As well as Hot rolled coil from ASTM A572 GR65, GR50, SS400, or any other standard by client required.
2. Tower Type: Steel Tube, Angle Steel, Lattice Mast, Self-supporting
3. Tower Style: Mono Pole Tower, Three Legs Tower, Four Legs Tower
4. Height: Below 100 meter, customized.
5. Wind Pressure: 0.35-1 KN/m2
6. Connection: Flanges, Inserting, Connecting Plate & Bolt
7. Surface Treatment: Hot Dipped Galvanized
8. Zinc Coating: 65μ-85μ
9. Supply Capacity: 1500 MT/Month
10. Color: Galvanized, or customized
11. Usage: GSM, RRU, CDMA, Micro Wave, Radio etc.
12. Certification: ISO9001:2008, ISO14001:2004, OHSAS18001: 2007, SGS, MA
Feature:
1, Design layout and drawing, set up specifications and sizes.
2, Buy row seamless steel pipes or flat steel plates and folding and welding them to be tubular pipes as well as galvanized steel bolts, nuts, washers and springs.
3, Measure and cut out sizes and holes.
4, Weld necessary parts (such as footing plates, connecting flanges and gussets, antenna mounts, lightning rod, ladder etc.)
5, Polish burrs and welding scars to make all members good surface.
6, Assemble tower sections according to drawings, make sure sizes and connecting parts are correct.
7, Hot dip galvanization: clean surface corrosion and oil with acid or other chemicals-->clean with water-->dip in cosolvents-->dry-->dip in hot zinc pool for galvanization-->cooling and curing-->clean-->dry
8, Check quality and start packing.
Telecom steel tower is generally made of angular steel plates and flat steel plates. The 4-leg lattice tower is generally divided into several sections and the sections are connected by flat connecting plates with bolts and nuts. Each tower section is made of angle steelt plates and flat plates. All the steel plates are prefabricated with cutout, holes and hot dip galvanization.
Specifications of Tubular Telecommunication Steel Tower
| Material | Angle steel plates, flat steel plate, bolts and nuts |
| Steel Type | Weldable low carbon structural steel |
| Steel Grade | GB Q235, Q345, BS 4360, ASTM A36 etc. |
| Yield Strength | Fy≥235MPa |
| Tensile Strength | Fu≥400MPa |
| Elongation | σ≥20% |
| Surface Finish | Hot dip galvanization |
| Galvanized layer | T≥65μm |
| Height | 20m to 100m, customized to requests |
| Design | 4 legs self-supporting or free standing lattice tower |
| Structure | 1 to 5 platforms, each platform comes with 4 to 6 brackets for mounting antennas or specified number of brackets for mounting antennas, microwaves, RRUs and other devices. |
| Supply mode | CKD(Complete Knocked Down), SKD(Semi-Knocked Down), DKD(Direct Knocked Down) |
| Fixing/Fastening | Bolts and nuts, connecting plates |
| Configuration | Foundations/anchoring bolts, tower sections, 1-5 platforms (optional), mounting brackets, ladder, anti-fall safety system, lightning rod, earthing plate etc. |
| Wind Load | 0.35-1.0kN/sqm |
| Lifespan | 20-50 years |
| Warranty | 3 years |
| Applications | GSM/3G/4G/5G/FM radio antennas, microwaves, telecom stations. |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2009
Total Annual:
10000000-20000000
Employee Number:
50~100
Ecer Certification：
Active Member
Established in August 2009, GUANGZHOU GUANGXIN COMMUNICATION EQUIPMENT CO., LTD. is a professional Hi-Tech enterprise of structural steelworks, specializing in research, development, manufacturing, selling and installation services. Since its establishement, GUANGXIN company has been co... Established in August 2009, GUANGZHOU GUANGXIN COMMUNICATION EQUIPMENT CO., LTD. is a professional Hi-Tech enterprise of structural steelworks, specializing in research, development, manufacturing, selling and installation services. Since its establishement, GUANGXIN company has been co...
Get in touch with us
Leave a Message, we will call you back quickly!