Guangzhou Guangxin Communication Equipment Co., Ltd.
| Payment Terms | Western Union, L/C, T/T |
| Supply Ability | 300ton/month |
| Delivery Time | 20-30days |
| Packaging Details | Cotton sheets or cloth package by bundle |
| Product Name | Telecommunication Tower Accessories |
| Steel Structure | HDG Lattice Steel Tower |
| Material | Steel Q355B(GB/T 1591) or Q235B(GB/T 70) |
| Hot-dip Galvanization | ISO 1461 2009, ASTM A123 |
| Tension strength (Mpa) | 360~510 |
| Tower Type | Self Supporting Angular / Tubular |
| Design Wind Speed | 35/210kph |
| Design of pole | Against earthquake of 8 grade |
| Connection Type | Parts for connection or installation will be provided |
| Brand Name | Guangxin |
| Model Number | GX-5660G |
| Certification | ISO9001:2008 SGS COC |
| Place of Origin | Guangzhou |
View Detail Information
Explore similar products
50m GSM FM 5G Telecom Steel Tower 3 Platforms Hot Dip Galvanized
25m 80m Q355 Hot Dip Galvanized Steel Tower 3 Legged Self Supporting
35m 3 Leg Tubular Telecom Steel Tower Q345 Q235 For Macrocell Antennas
35m Tubular Telecom Steel Tower 2 Platforms For Mounting Telecom Antennas
Product Specification
| Payment Terms | Western Union, L/C, T/T | Supply Ability | 300ton/month |
| Delivery Time | 20-30days | Packaging Details | Cotton sheets or cloth package by bundle |
| Product Name | Telecommunication Tower Accessories | Steel Structure | HDG Lattice Steel Tower |
| Material | Steel Q355B(GB/T 1591) or Q235B(GB/T 70) | Hot-dip Galvanization | ISO 1461 2009, ASTM A123 |
| Tension strength (Mpa) | 360~510 | Tower Type | Self Supporting Angular / Tubular |
| Design Wind Speed | 35/210kph | Design of pole | Against earthquake of 8 grade |
| Connection Type | Parts for connection or installation will be provided | Brand Name | Guangxin |
| Model Number | GX-5660G | Certification | ISO9001:2008 SGS COC |
| Place of Origin | Guangzhou | ||
| High Light | 4 Leg Tubular Telecommunication Tower Accessories ，ASTM A123 Telecommunication Tower Accessories | ||
4 Leg Tubular GSM MW Antenna Telecommunication Tower Accessories
The steel tube communication tower is mainly suitable for pull towers. Its main material is mainly made of steel pipe, because its root can be made very small, suitable for narrow sites or near the building, but the cost is higher than the angle steel Lattice tower.
Specification of Telecommunication Tower Accessories:
| Material | Tubular Steel, Angle steel plates, Flat steel plate |
| Steel Type | Weldable low carbon structural steel |
| Steel Grade | GB Q235, Q345, BS 4360, ASTM A36 etc. |
| Yield Strength | Fy≥235MPa |
| Tensile Strength | Fu≥400MPa |
| Elongation | σ≥20% |
| Surface Finish | Hot dip galvanization |
| Galvanized layer | T≥65μm |
| Height | 20m to 100m, customized to requests |
| Design | 4 legs self-supporting or free standing lattice tower |
| Structure | 1 to 5 platforms, each platform comes with 4 to 6 brackets for mounting antennas or specified number of brackets for mounting antennas, microwaves, RRUs and other devices. |
| Supply mode | CKD(Complete Knocked Down), SKD(Semi-Knocked Down), DKD(Direct Knocked Down) |
| Fixing/Fastening | Bolts and nuts, connecting plates |
| Configuration | Foundations/anchoring bolts, tower sections, 1-5 platforms (optional), mounting brackets, ladder, anti-fall safety system, lightning rod, earthing plate etc. |
| Wind Load | 0.35-1.0kN/sqm |
| Lifespan | 20-50 years |
| Warranty | 5 years |
| Applications | GSM/3G/4G/5G/FM radio antennas, microwaves, telecom stations. |
Feature of Antenna Telecom Steel Tower:
1. Communication steel Lattice tower height: refers to the vertical distance from the base of the tower foot to the installation location of the lightning rod;
2. Wind pressure requirement: Determine the wind pressure according to W0=V02/1600 by taking the average maximum wind speed V0 (m/s) of the 10-year once-in-tact 10-minute period of the local comparatively empty ground and flat surface with a height of 10m. kN/m2;
3. Full-load wind load: Calculate based on the number of antenna layers and the number of microwave antennas per layer, and the antenna diameter in a specific project;
4. Communication tower flexion angle: less than 1 degree;
5. Center tilt: The verticality of the tower shall not be greater than 1/1500 of the height of the steel Lattice tower ;
6. The period of preservation: not less than 30 years in the local environment;
7. Galvanizing requirements: General thickness greater than 86 microns, uniform thickness, smooth surface. The specific situation is determined according to the specific project;
8. Classification by material: angle steel towers, steel pipe towers.
9. Classification by structure: four-posted angle steel towers, three-column steel tube towers, single-tube towers (single tube towers), and pull-line towers.
10. According to the support methods: self-standing towers, pull-line towers;
11. The types of communication towers of our company: general communication towers, beautification communication towers, bionic tree communication towers, and landscape communication towers.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2009
Total Annual:
10000000-20000000
Employee Number:
50~100
Ecer Certification：
Active Member
Established in August 2009, GUANGZHOU GUANGXIN COMMUNICATION EQUIPMENT CO., LTD. is a professional Hi-Tech enterprise of structural steelworks, specializing in research, development, manufacturing, selling and installation services. Since its establishement, GUANGXIN company has been co... Established in August 2009, GUANGZHOU GUANGXIN COMMUNICATION EQUIPMENT CO., LTD. is a professional Hi-Tech enterprise of structural steelworks, specializing in research, development, manufacturing, selling and installation services. Since its establishement, GUANGXIN company has been co...
Get in touch with us
Leave a Message, we will call you back quickly!