Guangzhou Guangxin Communication Equipment Co., Ltd.
| Payment Terms | Western Union, L/C, T/T |
| Supply Ability | 300ton/month |
| Delivery Time | 20-30days |
| Packaging Details | Cotton sheets or cloth package by bundle |
| Product Name | Self Standing Tubular 3 Legged Steel Tower |
| Hot-dip Galvanization | ISO 1461 2009, ASTM A123 |
| Design Wind Speed | 30-50m/s, Can Customized as Buyer's Requirements |
| Tower Type | Tube Towers, Mono Pole Tower, Angle Towers |
| Design Wind Pressure | 0.3-1.2KN/M² |
| Work Platform | Height and Quantity up to clients |
| Connection Type | Nuts & Bolts |
| Place of Original | Guangzhou |
| Design of pole | Against earthquake of 8 grade |
| Brand Name | Guangxin |
| Model Number | GX-5625G |
| Certification | ISO9001 |
| Place of Origin | Guangzhou |
View Detail Information
Explore similar products
50m GSM FM 5G Telecom Steel Tower 3 Platforms Hot Dip Galvanized
25m 80m Q355 Hot Dip Galvanized Steel Tower 3 Legged Self Supporting
35m 3 Leg Tubular Telecom Steel Tower Q345 Q235 For Macrocell Antennas
35m Tubular Telecom Steel Tower 2 Platforms For Mounting Telecom Antennas
Product Specification
| Payment Terms | Western Union, L/C, T/T | Supply Ability | 300ton/month |
| Delivery Time | 20-30days | Packaging Details | Cotton sheets or cloth package by bundle |
| Product Name | Self Standing Tubular 3 Legged Steel Tower | Hot-dip Galvanization | ISO 1461 2009, ASTM A123 |
| Design Wind Speed | 30-50m/s, Can Customized as Buyer's Requirements | Tower Type | Tube Towers, Mono Pole Tower, Angle Towers |
| Design Wind Pressure | 0.3-1.2KN/M² | Work Platform | Height and Quantity up to clients |
| Connection Type | Nuts & Bolts | Place of Original | Guangzhou |
| Design of pole | Against earthquake of 8 grade | Brand Name | Guangxin |
| Model Number | GX-5625G | Certification | ISO9001 |
| Place of Origin | Guangzhou | ||
| High Light | Hot Dip Galvanization Telecom Steel Tower ，20m 3 Legged Steel Tower ，Telecom Steel Tower Self Standing | ||
Self Standing Tubular 3 Legged Steel Tower
The tubular steel tower consists of up to four sections, joint by means of bolted flanges. The tower is built on the foundation using anchor bolts, which set into concrete at the foundation.
The tower can be climbed from the inside and is equipped with working platforms and a ladder with fall protection system. Optionally, a service lift or climbing assistance can be installed.
The bottom cabinet sections are arranged in the tower bottom. The cabinet sections are connected to the generator and the top cabinet in the nacelle via power and control cables.
At the tower top the cables are routed through a cable loop. It allows the nacelle to turn several times in each direction without damaging the cables. The power cables between WTG and grid are routed through conduits.
The tower is protected against corrosion with a special sandblasting procedure and by applying an epoxy resin coating to the tower surface.
The foundation is project-specific, depending on the ground conditions and the local rules and regulations.
Specification:
| Material | Tubular Steel, Angle steel plates, flat steel plate |
| Steel Type | Weldable low carbon structural steel |
| Steel Grade | GB Q235, Q345, BS 4360, ASTM A36 etc. |
| Yield Strength | Fy≥235MPa |
| Tensile Strength | Fu≥400MPa |
| Elongation | σ≥20% |
| Surface Finish | Hot dip galvanization |
| Galvanized layer | T≥65μm |
| Height | 20m to 100m, customized to requests |
| Design | 4 legs self-supporting or free standing lattice tower |
| Structure | 1 to 5 platforms, each platform comes with 4 to 6 brackets for mounting antennas or specified number of brackets for mounting antennas, microwaves, RRUs and other devices. |
| Supply mode | CKD(Complete Knocked Down), SKD(Semi-Knocked Down), DKD(Direct Knocked Down) |
| Fixing/Fastening | Bolts and nuts, connecting plates |
| Configuration | Foundations/anchoring bolts, tower sections, 1-5 platforms (optional), mounting brackets, ladder, anti-fall safety system, lightning rod, earthing plate etc. |
| Wind Load | 0.35-1.0kN/sqm |
| Lifespan | 20-50 years |
| Warranty | 5 years |
| Applications | GSM/3G/4G/5G/FM radio antennas, microwaves, telecom stations. |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2009
Total Annual:
10000000-20000000
Employee Number:
50~100
Ecer Certification：
Active Member
Established in August 2009, GUANGZHOU GUANGXIN COMMUNICATION EQUIPMENT CO., LTD. is a professional Hi-Tech enterprise of structural steelworks, specializing in research, development, manufacturing, selling and installation services. Since its establishement, GUANGXIN company has been co... Established in August 2009, GUANGZHOU GUANGXIN COMMUNICATION EQUIPMENT CO., LTD. is a professional Hi-Tech enterprise of structural steelworks, specializing in research, development, manufacturing, selling and installation services. Since its establishement, GUANGXIN company has been co...
Get in touch with us
Leave a Message, we will call you back quickly!